Analysis case

Analysis case
This is an introduction to the case study.
1~30 item / All 38 items
-

[Case Study] Induction Heating for Gear Hardening
We will apply a time-varying current and determine the heat generation density distribution and temperature distribution of the gear.
last updated
-

[Analysis Case] Stress Analysis of Elastic Bodies (Frequency Response)
As an example of stress analysis, we present a stress analysis of an elastic body with a bell shape.
last updated
-

[Analysis Case] Analysis of Induction Heating
We conducted a coupled analysis of induction heating.
last updated
-

[Analysis Case] Induction Heating Analysis of Steel Plates (Coupled Analysis of Magnetic Field and Heat)
The target of the analysis is a steel plate penetrated by three-phase alternating current lines.
last updated
-

[Analysis Case] Analysis of PTC Resin Heater
Analyzing the property that electrical resistance increases as temperature rises.
last updated
-

[Analysis Case] Electric Field Analysis Between Electrodes
The electric field analysis between the electrodes was conducted using an axisymmetric model.
last updated
-

Analysis Case: Analysis of Capacitance
This shows an example of capacitance analysis through electric field analysis between the iron core and the coil.
last updated
-

[Analysis Case] Analysis of the Actuator
The subject of analysis is the actuator.
last updated
-

[Analysis Case] Cogging Torque Analysis of Claw Pole Motors
The subject of analysis is a claw pole motor.
last updated
-

[Analysis Case] Analysis Case of Hinge Type Electromagnetic Relay
The subject of analysis is a hinge-type electromagnetic relay switch.
last updated
-

Analysis case: Analysis of the film head
This shows an example of magnetic field analysis when current is applied to a thin film head.
last updated
-

[Analysis Case] Calculation of Electromagnetic Force in the Plunger Model
The analytical model for calculating electromagnetic force in the plunger model was a three-dimensional model.
last updated
-

[Case Study] Eddy Current Testing Using an External Field Method (Non-Destructive Testing)
We conducted an "eddy current testing" analysis to detect surface defects on the conductor plate.
last updated
-

[Analysis Case] The Effect of Magnetic Sheets for RFID Cards Using Outdoor Functionality
What changes occur in the electromotive force when a magnetic sheet is attached?
last updated
-

[Analysis Case] Analysis of a Microwave Oven
Below is an example of the analysis of electromagnetic waves inside a microwave oven.
last updated
-

Analysis example of a porous directional coupler.
While suppressing the losses of the guiding wave tube, branch the wave and measure the reflected power ratio, etc., in the sub-guiding wave tube.
last updated
-

[Analysis Case] Electromagnetic Waves in Parallel Plates Using a Slide Interface
Analysis is possible by one mesh interpolating the other mesh.
last updated
-

[Case Study] Electromagnetic Wave Analysis of Waveguides Using Slide Interfaces
Analysis of applying a slide interface to a non-connected mesh.
last updated
-

[Analysis Case] Electromagnetic Field Analysis of Wireless Power Transfer (Electromagnetic Induction Method)
Introduction of analysis examples of wireless power transmission using electromagnetic induction method.
last updated
-

[Analysis Case] Magnetic Field Analysis of Superconductors Considering the Critical State Model
The software used is "PHOTO-EDDY"! It is also possible to analyze Kim models that depend on magnetic flux density.
last updated
-

[Case Study] Static Magnetic Field Analysis Without Air Mesh
Simplifying the input of current density for complex-shaped coils! Introducing a case study of "PHOTO-MAGTZ" analysis.
last updated
-

[Analysis Case] Magnetization Analysis of a Cylindrical Magnet Considering Hysteresis "Hard Magnetism"
Using 'hyperbolic function approximation'! Determine the hysteresis loop with numerical values and hyperbolic functions.
last updated
-

[Analysis Case] Magnetic Field Analysis of Concentrated Winding IPM Motor
The electromagnetic steel sheet uses a B-H curve equivalent to 35A300! The benchmark model employs a concentrated winding stator.
last updated
-

[Analysis Case] Nonlinear Static Magnetic Field Analysis of Magnetic Shielding
The analysis model is a 1/8 model based on symmetry! We will introduce analysis cases using external field coils.
last updated
-

[Case Study] Magnetic Field Simulation Considering Hysteresis
The input method is simple and user-friendly! We will also introduce examples of investigating the behavior of hysteresis in a rotating magnetic field.
last updated
-

[Analysis Case] Predicting the magnetization distribution within a plastic magnet from measurement data.
Estimating the magnetization distribution from the numerical data of magnetic flux density obtained from the forward problem! Introducing an analysis case of the inverse problem.
last updated
-

[Analysis Case] Electric Field Analysis of Wound Type Capacitors
The capacitance of the cathode is theoretically determined by approximating a cylindrical capacitor as a parallel plate capacitor, and compared with the analytical results!
last updated
-

[Analysis Case] Electric Field Simulation of Capacitive Sensors
The software used is PHOTO-VOLT or VOLTjω! Move the electrodes based on the detection body for analysis.
last updated
-

[Case Study] Nonlinear Electric Field Analysis of Cable Joints
The analysis type is axisymmetric analysis using the MKSA unit system! A case study using current distribution analysis.
last updated
-

[Analysis Case] Electric Field Analysis of MEMS Electrostatic Actuators (Electrostatic Force)
Consideration of whether the order of the electrostatic force obtained as a result of the analysis is reasonable! A case study applying electric field analysis.
last updated