The custom product "CPT (Collaborative Robot Palletizing Tool)," which has achieved two years of success as a custom item, will now be offered as a standard product. CPT was born from the ideas of the custom line team at Piab Germany and has attracted attention since its launch in 2022 for its ability to pick multiple diverse boxes in the same cycle. Its off-center design, which extends up to 100mm in reach, and its lightweight, compact body reduce the burden on the robot arm. The built-in piCOMPACT(R)23 SMART valve unit enables rapid response and improves throughput. It also features COAX(R) technology, which excels in energy efficiency. The suction surface is plate exchangeable, making it easy to switch between foam pads and suction cups. Models compatible with UR20 size (UR E series and CB series) come with plug-and-play software, while other robot-compatible models are equipped with an IO-link compatible interface. For more detailed information, please refer to the related links.

The piGRIP® FLC is a new interface component that is compatible with all existing Piab suction cups. Regardless of the application, it allows for easier and more sophisticated adjustments for height differences and angles during picking. By adding the FLC between the piGRIP bellows and your preferred suction cup, the flexibility of operation is significantly enhanced. It enables the use of cups that were previously unusable due to insufficient stroke, while maintaining unique sealing performance and friction patterns. The FLC interface features a joint function that expands the range of motion by adjusting the angle of the suction cup relative to the workpiece. Additionally, by using a clamp fitting, the FLC, bellows, and suction cup can be securely fixed, reducing the risk of the cup detaching during operation. This also significantly lowers the risk of damage to the workpiece during transport. Furthermore, by incorporating the piSAVE sense valve between the piGRIP FLC and the suction cup, it becomes possible to control the extension and contraction of the FLC stroke before picking. For more details, please check the related links.

We have started selling a palletizing hand that can be transported by adsorbing the top and sides of a box. The weight is 5 kg. The side grippers can adjust the adsorption position using an air cylinder. We do not provide software for collaborative robots. The transport capacity is assumed to be a box containing six 2L PET bottles. Please feel free to contact us.

The KVG series has traditionally been available in two widths, 60mm and 120mm, but a 150mm width has now been added. This enhances ease of maintenance and expands the variety of forms available. Additionally, the vacuum source ejector cartridge can now be selected from three types: "vacuum flow focused," "high vacuum pressure focused," and "low supply pressure focused." ■ COAX Cartridge Provides high energy efficiency and reliable gripping. ■ Easy-Foam Maintenance time is minimized, leading to increased productivity. For product details, visit: "Customization for Success: Introducing the New KVG E Series" https://www.piab.com/ja-jp/news/-kvg-e-

■Kenos KFG Series Gripping System It allows for the assembly of parts without changing tools, thereby avoiding production interruptions and providing a significant advantage for the efficiency of the production line. It can also be used as a single gripper in combination with end-of-arm tooling (EOAT). These medium-sized grippers, positioned to complement the Kenos large-area gripper series, offer various advantages in handling workpieces with irregular and coarsely structured surfaces. Kenos Vacuum Gripping System Developed to simplify handling processes in various industries. It consists of foam pads and suction cups, designed to handle objects of different shapes, sizes, and materials. It can incorporate Piab's COAX multi-stage ejector as a vacuum source or be compatible with external vacuum generators. For more details on case studies, click here https://www.piab.com/ja-jp/success-stories/piab-and-kenos-tools-enable-safe-street-lighting-manufacture

Fully electric, slim design, no air tubes or cable wiring required. The "piCOBOT(R) Electric" leads the piCOBOT(R) program to further success. ■ Release of limitations on the range of motion of collaborative robot arms The piCOBOT(R) Electric vacuum gripper unit does not require compressed air. The versatility of collaborative robots is significantly enhanced. Due to its lightweight design, it can be directly mounted on the flange of collaborative robot tools. Since vacuum piping is unnecessary, the range of motion of the arm is not restricted at all. ■ Electricity instead of compressed air With only one connection for both power supply and data flow, the entire installed unit can be quickly removed and easily relocated. To maximize the performance of both the vacuum gripper unit and the collaborative robot, it can be used with a serial communication protocol for UR e-series. The new electric vacuum gripper unit can be equipped with features such as PIAB's signature suction pads. https://www.piab.com/ja-jp/news/picobot-electric- Piab Japan Co., Ltd.

Case Study [Background] Picking for the palletizing and depalletizing of one-liter cans is not going well. [Solution] Customized foam grippers and started the release of a model specifically for one-liter cans. [Effect] Increased lifespan of the foam and reduced maintenance frequency! For more details, please check the case study materials. https://www.ipros.jp/catalog/detail/747736 *You can also view it from the "Related Catalogs" below.

In small and medium-sized enterprises, there is an increasing demand for the automation of the palletizing process, which has relied on manual labor until now. Collaborative robots and small industrial robots require gripping tools that are easy to install and operate, and there is a need for durable construction and versatility to improve machine operating time and ease of use. Piab's palletizing tool, 'Kenos Safe&Light (KSL)', features a robust and sturdy design that can be used in a wide range of applications, making it a very lightweight solution. It is particularly suitable for heavy-duty applications in environments with a lot of dust. ★ Ideal for the following scenarios ★ ■ Manufacturing end-of-line (EOL) operations ■ Packaging / Warehousing ■ Handling of wooden parts For product details, visit here https://www.piab.com/ja-jp/robot-and-cobot-gripping-solutions/kenos-vacuum-gripping-systems For the continuation of the article, visit here https://www.piab.com/ja-jp/news/kenossafelight/

The piCOBOT(R)L is a collaborative robot hand tool that generates a maximum lifting load of 16 kg. It enables high-speed operations to achieve high productivity in packaging, palletizing, assembly of parts, or machine tending. It is designed with maximum flexibility in mind to handle a variety of items. It can be equipped with a wide range of gripper units, from standard Piab solutions to custom line solutions and in-house developments. Watch the video (YouTube) here: https://youtu.be/I_JtGneIlzU Check out the product lineup here: https://www.piab.com/ja-jp/robot-and-cobot-gripping-solutions/cobots-and-robot-grippers/picobot-l-vacuum-gripper-unit/picobot-l/

The VGS4005 is a lightweight and robust vacuum gripper ejector suitable for applications that do not require high vacuum levels. It operates reliably even in harsh environments and is designed for ease of use. It is ideal for applications such as handling bags and pouches where high vacuum levels are not required. The VGS4005 uses the SX12 or SX42 COAX cartridge without a flap valve. It can operate in extremely harsh environments, such as those with high humidity and dust. By implementing the VGS, you can build a reliable and cost-effective distributed vacuum system. ■ Compact size ■ Lightweight ■ Built-in silencer reduces noise levels ■ Incorporates patented COAX(R) technology ■ Compatible with Piab's G3/8” threaded suction cups (suction cups sold separately). <Logistics and Packaging Applications> 〇 Bin picking / Random bin picking 〇 Tray forming, tray loading/unloading 〇 Case/carton assembly 〇 Transporting boxes and containers 〇 Opening and transporting bags and pouches

"Palettizing = Form Gripper" is recognized by our users. Many manufacturers have entered the market, but can they customize for users? Our company provides grippers that meet user needs to the fullest extent. We can fulfill requests such as, "I want to palettize cardboard with one hand and also change the pallet!" Palettizing form gripper compatible with pallets.

Piab provides advanced vacuum technology to automate truck unloading operations. We offer solutions that enhance efficiency, safety, and ergonomics, including vacuum pumps and gripping tools that utilize suction cups and foam pads. This enables fast and safe material handling while minimizing the risk of personal injury and damage to handled products. Automating all processes in logistics and warehousing: ■ Depalletizing ■ Sorting operations ■ Pin picking ■ Box handling ■ Mobile robots ■ Robotic palletizing ■ Collaborative robot palletizing, and more We have a wide range of vacuum pumps, grippers, suction cups, optional features, and accessories. For more details, please visit this page: https://www.piab.com/ja-jp/industries/logistics-warehousing#truck-unloading

Most of the items shipped around the world are placed on pallets at some point. Piab offers a wide range of products tailored to customer needs, whether for palletizing work onto pallets or depalletizing work from pallets. All tools are designed to require minimal maintenance and to prevent product damage and worker injuries, thereby supporting the improvement of customer work efficiency. <Application> ■ Pallet handling and positioning ■ Handling of slip sheets ■ Trays and open-top containers ■ Boxes and containers ■ Handling of bagged items, etc. For more details, please visit this page. https://www.piab.com/ja-jp/industries/5

Piab's electric/vacuum solution products for the logistics and warehousing industry are developed to meet the demands of modern product handling that require a high level of technology, achieving efficient and reliable operations. <Automating all processes in logistics and warehousing> ■ Truck unloading ■ Depalletizing ■ Sorting operations ■ Pin picking ■ Box handling ■ Mobile robots ■ Robotic palletizing ■ Collaborative robot palletizing, etc. We offer a wide range of vacuum pumps, grippers, suction cups, optional features, and accessories. We further support logistics warehouse applications! For more details, please visit this page. https://www.piab.com/ja-jp/industries/logistics-warehousing

The Piab product configurator is designed to streamline the product selection process through a guided experience using rich product information, images, and features. It allows for a smooth transition from searching and customizing products to obtaining quotes and placing orders. Here is the Piab "Product Configurator": https://www.piab.com/ja-jp/downloads/product-configurators ■ Selection of Suction Cups (Ver.No.202403) [YouTube] Please also check out the tutorial on selecting the various specialized suction cups from Piab, which explains how to operate them. https://www.youtube.com/watch?v=2YjH2sa7Rx0 We hope this will be helpful for your selection based on applications and products.

Piab supports productivity improvements and energy savings in the automotive industry with innovative and reliable products. We provide high-quality vacuum solutions that can be implemented at every stage of the production line, from press shops and body shops to final assembly and parts production. <Examples of applications for the automotive industry> ■ Transport between metal sheet presses (press shop) ■ Picking and kitting of parts (body assembly) ■ Assembly of exterior and interior parts (final assembly) ■ Extraction of plastic parts (plastic molding factory) ■ Loading and unloading of metal sheets (tailored blanks) and more For more details, please visit this page. https://www.piab.com/ja-jp/industries/1/ "Smart vacuum solutions for the automotive industry" Download the materials here: https://www.ipros.jp/catalog/detail/742357

At "Robot Technology Japan 2024" held in Nagoya, we showcased a demonstration of the FCX50, which has received positive feedback for its new product. We offer suction cups that are ideal for gripping fruits and pouches with uneven surfaces. The innovative multi-lip design of the fruit suction cup "FCX50" is perfect for handling fruits with diverse shapes and surfaces that are prone to leaks, making suction difficult. To ensure detection by metal detectors, a small amount of metal powder is added to the food-grade silicone during manufacturing. Here is the video (YouTube): https://youtu.be/45LptKDdTbM

A unique vacuum soft gripper for handling delicate workpieces Simple and sturdy! Capable of handling fragile and delicate workpieces The 'piSOFTGRIP' is a cost-effective gripping tool developed for automation in the food industry. It can grasp lightweight and delicate workpieces with unusual shapes or irregular surfaces. It has a hollow interior and grips the workpiece with 2 to 3 fingers. Since it is vacuum-driven, the gripping force can be easily adjusted and controlled based on the applied vacuum level. Additionally, it complies with FDA 21 CFR and EU1935/2004 regulations and is made from silicone (metal detectable) approved for direct contact with food. This allows for the handling of a wide range of food products with the 'piSOFTGRIP', thereby expanding automation in the food industry. For more details, click here https://www.piab.com/ja-jp/news/unique-vacuum-based-soft-gripper-for-handling-sensitive-and-delicate-objects

Piab's new series of modular suction cups 'BXP ESD' Electrostatic discharge (ESD), which occurs when accumulated electricity suddenly flows between two objects, can have detrimental effects on many manufacturing industries. ESD is not only hazardous to operators but can also damage delicate components of batteries and electronic devices, potentially leading to malfunctions or failures. To protect delicate components such as batteries, fuel cells, and electronic devices from the adverse effects of electrostatic discharge during handling, Piab has developed a new series of suction cups incorporating ESD protection technology. Regardless of the selected size, the new BXP ESD cups cover a surface resistance range of 10^6 to 10^9 Ω (Ohm), ensuring the safety and integrity of batteries, fuel cells, and electronic components in any handling situation. The span has been tested and approved by independent organizations. For more details, click here https://www.piab.com/ja-jp/news/bxp-esd

The vacuum pump "piSAFE(R)" equipped with advanced safety features has been upgraded. While safety remains unchanged, versatility and sustainability have been added as new essential requirements. ■ New piSAFE(R) Program Customers can freely choose the appropriate level of functionality. * piSAFE * piSAFE Vacuum Non-Return Valve (VSV) * piSAFE Vacuum Non-Return Valve MINI (VSV MINI) * piSAFE Mounting Bracket ■ Improvements in the New Version of piSAFE - Common feed using VSV [Atmospheric Quick Release (AQR NC)]. Supply and release are handled with a single hose. This improves compatibility, simplifies connections, and reduces maintenance. - The silencer has become an option. It protects the hearing of operators. - New attachments have been added. A 32mm ball joint, a 16mm locking pin, and a special level compensator. The level compensator can be configured according to the purpose. For more details: https://www.piab.com/ja-jp/news/pisafe---

The piCOMPACT23 SMART program has added the IO-Link Class B option. In highly safe robot cells, the power supply to actuators and sensors is separated to prevent the risk of injury to workers entering the cell during maintenance inspections after an emergency stop (E-stop). By combining the IO-Link Class B with the bistable valve option, higher safety is achieved as the bistable valve remains in its last position during power outages or emergency stops. When a power outage or emergency stop occurs, the power supply to the valve is cut off, but the power supply to the sensors continues, allowing for ongoing vacuum level checks and monitoring. If the pump is in energy-saving (ES) mode, the valve operates with pre-charging, generating vacuum to hold the workpiece. The IO-Link Class B option is now available in the piCOMPACT(R) 23 SMART configurator. For more details, please check this page: https://www.piab.com/ja-jp/news/picompact23-smartio-linkb

Announcing the cutting-edge online tool 'OVM Pro 3D' designed to transform the methods of vacuum system configuration, simulation, and optimization. OVM Pro 3D stands for "Optimal Vacuum Management Professional" and utilizes advanced digital modeling and simulation to streamline the online system design process, offering various benefits ranging from control and efficiency to significant cost reductions. ★Featured Function - Application for Cardboard★ This feature includes a step-by-step wizard for defining the cardboard used in cardboard boxes, mimicking actual leak parameters and vacuum level tests. Users can fine-tune the sealing quality of the cardboard using a sliding bar, allowing for precise design of the vacuum system for cardboard boxes. For more details, please check this page. https://www.piab.com/ja-jp/news/piab-revolutionizes-vacuum-system-configuration-with-ovm-pro-3d-tool

The versions of piCOBOT(R) and piCOBOT(R)L compatible with FANUC CRX have been added to the product lineup. (Plug and play specification) ■ piCOBOT and piCOBOT L Despite being very lightweight at just 720g, the arm end tool can lift up to 7kg of workpieces. In 2022, a more powerful model, piCOBOT L, was introduced, boasting a lifting capacity of up to 16kg. ■ Configuration of products for Fanuc CRX A full package including software plugins, mechanical interfaces, dedicated cables, and compressed air hoses. With a wide range of suction cups and accessories available for setup, custom applications suitable for any situation can be realized. piCOBOT and piCOBOT L will be sold by FANUC as collaborative robot equipment, and they will also be available as a CRX package that complements the existing series on piab.com. For product information, visit: https://www.piab.com/ja-jp/news/fanuc-crxpicobot/

Compact and Powerful Gripper for Collaborative Robots The piCOBOT hand for collaborative robots has been released. It is not only equipped with a high-efficiency ejector that generates a large vacuum flow in a compact size, but also features an LED lighting and blinking mechanism that allows for easy identification of the vacuum state. Additionally, the vacuum breaking mechanism is designed to end when positive pressure is detected, making it energy-efficient. It is also registered with Universal Robots' "UR+". For product details, visit here: https://premium.ipros.jp/piab/product/detail/2000431691/ https://www.piab.com/ja-jp/robot-and-cobot-gripping-solutions/cobots-and-robot-grippers/picobot-vacuum-gripper-unit

Piab's suction cups can be configured to meet lifting and gripping needs. They enable handling of materials and food, opening bags, picking electronic components, labeling and holding, and picking slippery materials or bags. The multi-stage ejector COAX(R) generates vacuum using compressed air as the power source. It can produce a vacuum flow rate up to three times the consumption of compressed air, allowing for improved cycle speed and reduced energy consumption. We look forward to your inquiries and test requests. Here is the video (YouTube): https://youtu.be/Lwtd1G9qRiM

Simple and sturdy! Capable of handling delicate and easily damaged workpieces. The 'piSOFTGRIP' is a cost-effective clipping tool developed for automation in the food industry. It has a hollow interior and grips workpieces with 2 to 3 fingers. Being vacuum-driven, the gripping force can be easily adjusted and controlled based on the applied vacuum level. Additionally, it has the potential to be used for picking small and irregularly shaped workpieces, such as toys, beyond the food industry. 【Features】 ■ Cost-effective clipping tool ■ Hollow interior ■ Grips workpieces with 2 to 3 fingers ■ Simple and sturdy ■ Usable for picking small and irregularly shaped workpieces <Example> Boxes soft cream puffs, which are easily damaged, without harming them! It can also handle workpieces with irregular shapes and surfaces. Picking of small parts and tools beyond food is also possible. https://premium.ipros.jp/piab/product/detail/2000619558/

This is a palletizing simulation of pallets, cans, and tin plates using a lightweight 1.8Kg foam gripper. Kenos® Safe&Light (KSL Vacuum Foam Gripper) A robust and simple solution that can be used for various applications. It is particularly suitable for palletizing in harsh environments with a lot of dust. The special design, which holds the foam body with a carbon fiber structure, makes it very lightweight and maximizes the payload performance of collaborative robots and robots. For this reason, it is optimally designed for collaborative applications. The KSL can be equipped with either a check valve or flow control. We look forward to your inquiries and test requests. Watch the video (YouTube) here: https://youtu.be/V_6XMwlcqa0 See the product lineup here: https://www.piab.com/ja-jp/robot-and-cobot-gripping-solutions/kenos-vacuum-gripping-systems/ksl/

■ Collaborative Robot Hand "piCOBOT" Equipped with a compact, high-efficiency ejector that generates a large vacuum flow. The vacuum breaking mechanism is designed to stop as soon as positive pressure is detected, making it energy-saving. ■ Selectable Suction Cup "piGRIP" A suction cup that can be freely combined and individually optimized. Various fittings can be selected, making it easy to replace existing cups. ■ Vacuum-Driven Soft Gripper "piSOFTGRIP" Suitable for picking small and irregularly shaped items, such as toys, in industries beyond food. The gripping force can be easily adjusted and controlled based on the applied vacuum level. It grips the workpiece with 2 to 3 fingers. 【Video】"AI Vision for Piece Picking FANUC Robot" (Micro Technica Co., Ltd. YouTube) https://youtu.be/Cj3rp_0RUrs

Fruit picking requires flexibility. To ensure a reliable process, suction cups that can handle complex surfaces and various shapes are necessary. Piab's new metal detection-compatible product, the "FCX50," meets these conditions. It features a flexible bellows that adapts even when the center of gravity is off, and a multi-lip design that accommodates diverse surface adhesion. The innovative multi-lip design of the fruit suction cup FCX50 is ideal for handling fruits with difficult-to-adhere surfaces that are prone to leaks. The excellent adhesion performance of Piab's new fruit suction cup reduces air leakage, allowing for the use of smaller vacuum pumps, which contributes to energy savings. To ensure detection by metal detectors, a small amount of metal powder is added to food-grade silicone during manufacturing. For product information, visit here: https://www.piab.com/ja-jp/news/piab--fcx50-/ [Video] Introduction of the new FCX50, capable of suction transport for pineapples: https://youtu.be/mharMexCB2Q

The innovative multi-lip design fruit suction cup "FCX50" is ideal for handling fruits with difficult-to-adhere surfaces that are prone to leaking, thanks to its diverse shapes. To ensure detection by metal detectors, a small amount of metal powder is added to the food-grade silicone during manufacturing. ■ Designed to adhere at low vacuum levels, it allows for gentle and secure handling of fruits without damaging them. ■ It can accommodate fruits of various sizes, allowing for picking both narrow and wide parts of the fruit. ■ Even if the suction cup is applied at an angle due to a misaligned center of gravity on the fruit, the flexible bellows allow the lip to adapt and align properly for a secure grip. ■ Compliant with FDA 21 CFR 177.2600, EU 1935/2004, and EU 2023/2006 regulations. This suction cup features a unique structure and original design, enabling it to adhere to various fruits. Watch the suction of a pineapple. Video (YouTube) here: https://youtu.be/mharMexCB2Q