This is a device capable of evaluating the durability of specimens such as cartilage by performing repeated compression and detecting the expansion of strain due to creep. It automatically applies load using an actuator and measures "compression displacement" and "compression load." Additionally, it is equipped with a warm water tank for temperature control of the specimen. Real-time graph display of measurement data and data storage in CSV file format are possible, making it suitable for the automation and data collection of tests. We have newly listed the "Cartilage Compression Load Testing Machine." Please take a look. *Feel free to contact us. *You can download the catalog for free.

This is a "friction sliding testing machine" that allows for testing by sliding a friction plate against guide wires and catheters at a constant speed, applying friction from side to side. It is capable of measuring the frictional force on the work surface. Equipped with a hot water tank, it enables testing in water maintained at a constant temperature. The measurement results are displayed in real-time as graphs on a PC, and the measurement data can be saved in CSV file format. Additionally, parameters can be set arbitrarily. It is capable of conducting 500 durability reciprocating tests.

This is a device capable of measuring the rotational torque of various mechanical components such as dampers and hinges. The rotational torque of the sample is measured using a strain sensor. The speed controller allows you to set the number of rotations, forward trips, and return trips. Additionally, it is possible to select between angle control and speed control. Measurement data is displayed in real-time as a graph on a PC, and it can also be saved in CSV file format, making it ideal for data collection, management, and analysis. We have newly listed the "Damper and Hinge Torque Measurement Device." Please take a look. *Please feel free to contact us. *You can download the catalog for free.

Lightweight, compact, and customizable, Protech's "Shield Box - RF Shielded Enclosure PSB Series." It supports low frequencies from 430MHz to high frequencies up to 6GHz. The shielding performance is -60dB for standard models, with options available for over -80dB. There are also various options available, such as a transparent window for visibility inside the box and filters to stabilize signal communication inside and outside the shield box (compatible with various connectors like USB, LAN, etc.).

We are pleased to introduce our new product, the "Printed Circuit Board and Electronic Equipment Multi-Function Inspection System Future3000." Our expandable "Future3000" can not only determine pass/fail judgments through various optional boards but also make distinctions based on measurement values. Additionally, it is possible to change threshold values according to customer specifications. Furthermore, the results can be stored in CSV format. For more details, please refer to our catalog.

Our new product, the "Printed Circuit Board and Electronic Equipment Multi-Function Inspection System Future3000," has been developed with the theme of "supporting quality inspection" for our customers. In the past, function testers required the development of inspection circuits and the main board to control them on a case-by-case basis according to customer specifications. However, our "Future3000" consolidates the standard hardware necessary for function testers, allowing us to provide an expandable function tester through combinations with measurement option boards. We have a catalog available, so please take a look.

Our "Shield Box (Radio Wave Shielding Box) PSB Series" has been developed with the theme of supporting our customers' "quality inspections." We provide an environment that "blocks external radio waves and prevents internal radio waves from leaking outside," which is necessary for testing wireless communication devices. Using the know-how from the "Shield Box (Radio Wave Shielding Box) PSB Series," we accommodate various customizations such as compact, simple, windowed, and automatic opening and closing types, as well as various interfaces and conditions. (Supported interfaces include Dsub / USB / LAN / HDMI / various coaxial connectors / air inlets for pneumatic equipment, etc.) We have published a collection of case studies for customized shield box production, so please take a look.

We will sell the stamping mechanism, which is standardly equipped in our manufactured inspection jigs, as a unit. We have received positive feedback from customers stating that it "is highly durable and can be used with minimal maintenance." The air-type stamping unit can accommodate a layout of 12 characters in 2 rows with a font size of 13.75 pt. It also supports character rearrangement. There is a version with a lid that can handle highly volatile inks. The electromagnetic solenoid type stamping unit can use commercially available bookkeeping stamps. We have started the production and sale of stamping units, so please take a look.

This device is a medical connector testing machine capable of conducting tests in accordance with ISO 80369 and the old ISO 594 series. It supports the "fitting (pre-assembly for testing)" and "torsional stress test" specified in ISO 80369 and the old ISO 594 series. The measurement results are displayed in real-time as graphs on a PC, and the measurement data can be saved in CSV file format. Additionally, parameters can be set arbitrarily. This allows for easy testing of various connectors under ISO 80369 that require high-precision numerical management. With automation and data management, work efficiency and data management are streamlined! * Videos of tests compliant with ISO 80369 are also available! (Please visit our website) * We also accept requests for demonstrations. Please feel free to contact us.

If you want to conduct torque measurements in a temperature and humidity environment, this is a must-see! It is possible to transform your existing constant temperature chamber into a torque measurement device that meets environmental testing requirements without any modifications. We will couple the work inside the constant temperature chamber with the torque measurement device using the cable hole of the chamber. Please inform our sales team of the manufacturer, model, torque rating, rotational speed, and other measurement specifications of your current constant temperature chamber. We have newly published "Torque Measurement Inside a Constant Temperature Chamber." Please take a look. *Feel free to contact us. *You can download the catalog for free.

This is a measuring device capable of measuring the mechanical properties of stent grafts in accordance with JIST0401! It can measure "radial force," which is effective in preventing perigraft leaks and migration, as well as "flexibility," which is effective in preventing kinking. The measurement results are displayed in real-time graphs on a computer. Since the measurement data can be saved in CSV file format, it is also suitable for data processing of test results. We have newly listed the "Mechanical Properties Measurement Device for Stent Grafts." Please take a look. *Feel free to contact us. *You can download the catalog for free.

New Product! "Air Press Machine for Circuit Board Inspection"! This high-load press machine can handle up to 800 pins and circuit boards with a maximum size of 500mm x 500mm, thanks to its air press operation controlled by buttons. By exchanging fixture jigs, this single press machine can connect to various inspection circuit boards, making it highly versatile and cost-effective. We have newly listed the "Air Press Machine for Circuit Board Inspection." Please take a look. *Feel free to contact us. *You can download the catalog for free.

We have published a "Torque Measurement Device" that can measure the three stresses of torsion, tension, and compression, as well as "Measurement Software for Torque Measurement Devices" that can display measurement data in real-time. Please take a look.

By using the cable hole of the existing constant temperature chamber and coupling the workpiece inside the chamber with the torque measuring device, it can be transformed into a torque measuring device suitable for environmental testing. No modifications to the constant temperature chamber are required!! You can easily prepare a torque measuring device for environmental testing. Please take a look at the materials.

This is a must-see for those who want to measure the minute torque and angle transmission characteristics of cutting-edge medical micro guide wires and similar devices! By applying the versatile PT8000 and utilizing our unique all-position air bearings, we have made it possible to measure these minute characteristics. Additionally, we can evaluate the operability of guide wires and PTCA, quantifying the previously difficult-to-assess tactile feedback through graphs and data. Please check the details!

Here is an example of a motor environmental testing device. At Protec, we have also manufactured a wide variety of testing machines. Please take a look at the case studies as well.

With our proprietary built-in torque sensor and multifunctional controller, we can measure and analyze the torsional stress transmission characteristics of mechanical components such as pumps, dampers, and rollers. We construct and provide equipment tailored to our customers' measurement specifications, including measurement jigs. Please take a look at our case studies.

This is a must-see for those who want to measure the minute torque and angle transmission characteristics of cutting-edge areas such as guiding catheters! By applying the general-purpose machine PT8000 and utilizing our unique full posture air bearing, we have made it possible to measure minute characteristics. Additionally, it allows for the evaluation of the operability of guiding catheters, enabling the quantification of the previously difficult-to-assess tactile feel through graphs and data. Please be sure to check the details.

We would like to introduce our exhibited products at the "5th Medical Device Development and Manufacturing Exhibition," which will be held at Tokyo Big Sight from June 25th. Under the theme of "Reliable Measurement Technology Supporting Catheter Treatment": - We will demonstrate the "Catheter Operability Measurement Device," which quantifies the sliding and rotational characteristics of catheters used in endovascular treatment. - We will also showcase the "Stent Mechanical Properties Measurement Device," which quantifies the mechanical properties of stents used in endovascular treatment. Additionally, under the theme of "Support for Quality Inspection": - We will demonstrate the "Future3000," an inspection system that accommodates small lots and a variety of products. - We will also showcase the "Shield Box," designed for wireless communication device inspection. During the exhibition period, we will also be available for consultations regarding various stress measurement devices and inspection equipment. We sincerely look forward to your visit. 《Event Overview》 - Name: 5th Medical Device Development and Manufacturing Exhibition - Dates: June 25 (Wednesday) to June 27 (Friday), 2013 10:00 AM to 6:00 PM (until 5:00 PM on June 21 only) - Venue: Tokyo Big Sight, East Hall - Our Booth Number: East 23-29 - Application for Free Invitation Tickets: info-2@protec5461.co.

Protech Co., Ltd. has launched a new concept product, the "Printed Circuit Board and Electronic Device Multifunction Inspection System Future 3000." This product can be configured as an inspection system by combining various measurement circuit boards and display units around the control unit's MCU board, incorporating the necessary functions. It can be used as an integrated unit housed within a hand press unit or operated with the control unit independently. We also offer optional boards to configure the necessary circuits based on the inspection items required by our customers. A catalog is available, so please take a look.

Our new product, the "Printed Circuit Board and Electronic Equipment Multi-Function Inspection System Future3000," has been developed with the theme of "supporting quality inspection" for our customers. In the past, function testers required the development of inspection circuits and the main board controlling them on a case-by-case basis according to customer specifications. However, our Future3000 consolidates the standard hardware necessary for function testers, allowing us to offer an expandable function tester through combinations with measurement option boards. We have a catalog available, so please take a look.

We would like to introduce our new product, the "Printed Circuit Board and Electronic Device Multi-Function Inspection System Future3000." Our expandable "Future3000" can not only determine pass or fail through optional boards but also make distinctions based on measurement values. Additionally, it is possible to store these results in CSV format. For more details, we have a catalog available, so please take a look.

A motor that is widely used for various applications. It has been adopted by many customers for motor load testing. In addition to the products listed in our catalog and case studies, we also offer proposals tailored to your needs. Please take a look at our catalog and case studies, and feel free to contact us.

In addition to selling torque measurement equipment, our company also offers paid data measurement for torque and stress measurement. The measurement results are displayed in graphs and provided in CSV files. We can measure complex machine characteristics with high resolution, making it ideal for analyzing design and quality issues. We can achieve stress measurement under various operations, such as compressive stress while twisting and inertial torque under acceleration control. Please feel free to consult us.

Our measuring and testing equipment is used in various applications, such as mechanical measurements of implant screws, transmission characteristic tests of guide wires, and torque measurements of magnetic materials under high magnetic fields. Our unique technology is packed into our equipment to measure minute changes with high precision. Please take a look at our case studies.

Renewal of the cogging torque measurement device catalog. This is a cogging torque measurement device that combines the general-purpose controller PT-8000 with a built-in torque sensor driven by an AC servo system. It is ideal for the detent torque of small DC motors and stepping motors.

New case study on measuring the stirring torque of a suspension. This is a case where the torque during toner stirring was measured in the product state. Our original built-in torque sensor demonstrates its effectiveness in verification tests during development and quality inspections during mass production. We encourage you to consider it.

It is possible to measure the load of high-speed motors up to 60,000 RPM. Automatic measurement is possible while controlling the load torque at a constant level, allowing for variations in rotational speed or torque sweeping. A brushless motor is used for the brake load, enabling low inertia and high precision measurements.

An example of a research and development stirring torque measurement device constructed using a multifunctional controller and a built-in torque sensor has been newly published. Please take a look.

New case of environmental testing equipment for motors. At Protec, we have developed a wide variety of testing machines. For example, we also handle mechanical testing equipment for medical metal bone screws. Please take a look.