Reiken Co., Ltd. will exhibit at "FOOMA JAPAN 2025," which will be held at Tokyo Big Sight from June 2 (Tuesday) to June 5 (Friday). We will showcase the following products as various chillers and temperature control devices (such as temperature control for mixer jackets): - New water-cooled temperature control unit - Hot water circulation device - Air-cooled temperature control unit - Heat transfer medium (oil) circulation device 【Event Overview】 ■ Booth Number: W4-32-21 ■ Exhibited Products: Chillers and temperature control devices

Reiken Co., Ltd. will be exhibiting at the "POWTEX 2025 International Powder Industry Exhibition Osaka," which will be held at Intex Osaka from October 15 (Wednesday) to 17 (Friday). We will showcase the following products as various chillers and temperature control devices (such as temperature control for mixer jackets): - New water-cooled temperature control unit - Air-cooled temperature control unit - Heat transfer medium (oil) circulation device - Hot water circulation device 【Event Overview】 ■ Booth Number: 5-C01 ■ Exhibited Products: Chillers and temperature control devices

Reiken Co., Ltd. will be exhibiting at "FOOMA JAPAN 2025," which will be held at Tokyo Big Sight from June 10 (Tuesday) to June 13 (Friday). We will showcase the following products as various chillers and temperature control devices (such as temperature control for mixer jackets): - New water-cooled temperature control unit - Heat transfer (oil) circulation device - Hot water circulation device 【Event Overview】 ■ Booth Number: East 1L-16 ■ Exhibited Products: Chillers and temperature control devices

Reiken Co., Ltd. exhibited at "INTERMOLD Nagoya," held at Portmesse Nagoya from June 26 (Wednesday) to June 28 (Friday). We showcased the following products as peripheral devices (temperature control units for molds and jackets): - New water-cooled temperature control unit - High-temperature water circulation device - Oil temperature control unit - Air-cooled temperature control unit - Negative pressure mold temperature control unit - Mold rapid heating and cooling system (panel only) - Superheated steam circulation device (panel only) 【Event Overview】 ■ Booth Number: 2-224 ■ Exhibited Products: Temperature control units for molds and jackets

Reiken Co., Ltd. exhibited at 'IPF Japan 2023', held at Makuhari Messe from November 28 (Tuesday) to December 2 (Saturday). Thank you very much for your visit. We showcased the following products as peripheral devices (temperature control units for molds and jackets): - Air-cooled temperature control unit - Negative pressure mold temperature control unit - Central control panel - Oil temperature control unit - Mold rapid heating and cooling system - Hot water circulation device - High-temperature water circulation device - Superheated steam circulation device (panel only) 【Event Overview】 ■ Booth Number: 52318 ■ Exhibition Hall: Hall 5 ■ Exhibited Products: Temperature control units for molds and jackets

Reiken Co., Ltd. exhibited at the "Monozukuri Fair 2023" held at Marine Messe Fukuoka from October 18 (Wednesday) to October 20 (Friday). Thank you very much for your visit. We showcased the following products as peripheral devices (temperature control units for molds and jackets): - Oil temperature control unit - 230℃ water temperature control unit - Cooling and heating control unit - Superheated steam circulation device (panel only) 【Event Overview】 ■ Booth Number: AN-16 ■ Exhibition Zone: Monozukuri Corner ■ Exhibited Products: Temperature control units for molds and jackets

Reiken Co., Ltd. exhibited at the "International Powder Technology Exhibition Osaka 2023," held at Intex Osaka from October 11 (Wednesday) to October 13 (Friday). Thank you very much for your visit. ■ In-person Exhibition: October 11 (Wednesday) - October 13 (Friday), 2023 ■ Online Exhibition: September 27 (Wednesday) - November 10 (Friday), 2023 We will showcase the following products as peripheral devices (temperature control units for jackets): - Oil temperature control unit - 230°C water temperature control unit - Chiller - Cooling and heating control unit - Superheated steam circulation device (panel only) - Others 【Event Overview】 ■ Booth Number: 4-U07 ■ Exhibition Zone: Drying, Cooling, and Others ■ Exhibited Products: Temperature control units for jackets

Reiken Co., Ltd. exhibited at the "International Powder Technology Exhibition Tokyo 2022," held at Tokyo Big Sight from December 7 (Wednesday) to December 9 (Friday). Thank you very much for your visit. ■ In-person exhibition: December 7 (Wednesday) to December 9 (Friday), 2022 ■ Online exhibition: November 21 (Monday), 2022 to January 27 (Friday), 2023 We showcased the following products as peripheral devices (temperature control units for jackets): - Chiller - Temperature control unit for cooling and heating - 230°C water temperature control unit - Oil temperature control unit 【Event Overview】 ■ Booth number: 2R-04 ■ Exhibition zone: Drying, Cooling, and Others ■ Exhibited products: Temperature control units for jackets

Reiken Co., Ltd. exhibited at the '2022 Japan Die Casting Exhibition' held at Pacifico Yokohama from November 10 (Thursday) to November 12 (Saturday). Thank you very much for your visit. We showcased the following products as peripheral devices for die casting machines (cooling and heating circulation devices for die casting machine molds): - Chiller - Temperature control unit - 230°C water temperature control unit - Oil temperature control unit - Vacuum type temperature control unit 【Event Overview】 ■ Booth Number: D-07 ■ Exhibition Zone: Peripheral Devices for Die Casting Machines ■ Exhibited Products: Cooling devices for molds (chiller), mold temperature control units, media temperature control systems

Reiken Co., Ltd. will be exhibiting at the "Nagoya Plastic Industry Exhibition 2021" held at Port Messe Nagoya (Nagoya International Exhibition Hall) from September 29 (Wednesday) to October 1 (Friday). We will showcase the superheated steam circulation device "KCS-8078/600" and the high-temperature hot water circulation device "KCT-5012BC/230," which will be released on October 1. 【Event Overview】 ■ Booth Number: H-8 ■ Exhibition Zone: Molding-related Equipment/Peripheral Devices ■ Exhibited Products: Mold Temperature Controllers, Mold Rapid Heating and Cooling Systems, Media Temperature Control Systems

Reiken Co., Ltd. will exhibit at the "International Powder Technology Exhibition Osaka 2021," which will be held at Intex Osaka from October 13 (Wednesday) to October 15 (Friday). We will showcase the superheated steam circulation device "KCS-8078/600" and the high-temperature hot water circulation device "KCT-5012BC/230," which will be released on October 1. 【Event Overview】 ■ Booth Number: 4-R01 ■ Exhibited Products: Mold temperature control device, mold rapid heating and cooling system, water treatment device

All models, except for a large air-cooled chiller, now come standard with a touch panel controller. 【Features】 ■ Improved operability and visibility with touch panel adoption ■ Rich interfaces compatible with IoT ■ Supports multi-stage temperature control processes ■ Capable of multi-variety production ■ Supports diverse temperature control ■ Traceability compatible ■ Global language support for temperature control processes

The "KCWIII-CA (Cooling Assist) Series" automatically determines when the tower cooling water temperature is lower than the chiller set water temperature and cools the tank water using tower water. As an energy-saving type, it is eligible for preferential treatment under the investment promotion tax system for production improvement! With a wide lineup ranging from 10 to 60 horsepower, it can be selected according to the application. Additionally, since it has the same specifications as conventional units, it is easy to connect piping and can be easily replaced. 【Features】 - Energy-saving (power consumption reduced by up to 65% to 83% compared to conventional units) - When the cooling water temperature is more than 10°C lower than the set water temperature, the power of the cooling unit is zero - Supports compressor operation even when the temperature difference is below 10°C - Indirect cooling stabilizes water quality It is expected to be applied in various fields of the chemical, medical, and food industries that require temperature control of plastics, rubber, and raw materials (liquids, powders, slurries, etc.).

【Schedule】April 20, 2016 (Wednesday) to April 23, 2016 (Saturday) 10:00 AM to 5:00 PM (until 4:00 PM on the last day) 【Venue】Intex Osaka 【Booth Location】Hall 6, Zone C, B13 Reiken Co., Ltd. is an expert in "temperature control" and "water treatment technology." We will be exhibiting proven equipment centered around the following products at the Platex Osaka Exhibition: - Chillers (Inverter) - Mold Rapid Heating and Cooling System - High-Temperature Water Circulation Device - Air-Cooled Hot and Cold Water Circulation Device - Negative Pressure Mold Temperature Controller - Circulating Water Rust Prevention Device - Automatic Cleaning Filter We invite you to visit us during this opportunity. *For highlights, please click the link below! ↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓ http://www.a-jpm.jp/platex_osaka_2016/list.html#index_ra

【Schedule】April 20, 2016 (Wednesday) to April 23, 2016 (Saturday) 10:00 AM to 5:00 PM (until 4:00 PM on the last day) 【Venue】Intex Osaka 【Booth Location】Hall 6, Zone C, B13 Reiken Co., Ltd. is an expert in "temperature control" and "water treatment technology." We will be showcasing proven equipment centered around the following products at the Platex Osaka Exhibition: - Chillers (Inverter) - Mold Rapid Heating and Cooling System - High-Temperature Water Circulation Device - Air-Cooled Hot and Cold Water Circulation Device - Negative Pressure Mold Temperature Controller - Circulating Water Rust Prevention Device - Automatic Cleaning Filter We invite you to visit us during this opportunity. *For highlights, please click the link below! ↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓ http://www.a-jpm.jp/platex_osaka_2016/list.html#index_ra

Reiken Co., Ltd. will be exhibiting at the '2018 Nagoya Plastic Industry Exhibition' held at Portmesse Nagoya (Nagoya International Exhibition Hall) from October 31 (Wednesday) to November 2 (Friday). We will showcase a chiller that achieves energy savings and the industry's smallest compact design for the temperature control system for CFRP thermal press molding. 【Event Overview】 ■ Booth Number: D-9 ■ Exhibition Zone: Plastic Machinery - Molding Machine Parts/Peripheral Equipment ■ Exhibited Products: Mold temperature control units, mold rapid heating and cooling systems, water treatment equipment.

The KCT series lineup of hot water circulation devices has been expanded to include a unit that can handle temperatures up to 230°C with hot water. It is capable of heating water to 230°C and can be used not only for temperature control of injection molding molds but also for jacket temperature control of CVD devices and reaction apparatus. The low-noise, low-vibration booster pump has excellent maintenance features and reduces frequency with its unique control technology. Oil changes are completed simply by turning the oil supply and drain port to extract and refill. 【Features】 - Adoption of a new non-seal magnetic pump. Maximum pressure and maximum flow rate increased compared to conventional models. - Use of a low-noise, low-vibration booster pump. - As a leak prevention measure, all conventional designs have been reviewed, and heat and pressure resistance measures have been implemented in the internal structure.

We have launched the industry's first superheated steam circulation device, the "KCS-8078/600." Traditionally, when using high-temperature media, the maximum temperature for thermal media oil was 320°C, but this device can circulate superheated steam at temperatures up to 600°C. Typically, the use of superheated steam requires boilers and softening equipment, but since the water in the built-in tank circulates, no special utilities are needed. Furthermore, our patented heat recovery system achieves approximately 10% energy savings. 【Features】 ■ Circulates superheated steam at 600°C ■ Circulates at low pressure (below 0.1 MPa), eliminating the need for pressure-resistant design in piping and target objects ■ No special utilities such as boilers or softening equipment are required ■ No installation notifications or boiler qualifications are necessary

The "KCWIII-CA (Cooling Assist) Series" automatically determines when the tower cooling water temperature is lower than the chiller set water temperature and cools the tank water with tower water. As an energy-saving type, it qualifies for preferential treatment under the investment promotion tax system for production enhancement! With a wide lineup ranging from 10 horsepower to 60 horsepower, it can be selected according to the application. Additionally, since it is compatible with conventional models, piping connections are easy and replacement is straightforward. 【Features】 - Energy-saving (power consumption reduced by up to 65% to 83% compared to conventional models) - When the cooling water temperature is more than 10°C lower than the set water temperature, the power of the cooling unit is zero - Supports compressor operation even when the temperature difference is below 10°C - Indirect cooling stabilizes water quality It is expected to expand into various sectors of the chemical, medical, and food industries that require temperature control for plastics, rubber, and raw materials (liquids, powders, slurries, etc.).

By adopting high-performance pumps, the temperature on the load side can be consistently controlled uniformly. The heating efficiency is high, and the heating time can be significantly reduced. It is capable of temperature management for various applications such as CVD equipment, roll jackets, and various chambers. Machines with maximum temperatures of 95°C, 120°C, 160°C, and 180°C are available! For more details, please click here.

We are currently selling the cold water circulation device "KCWIII-IV (Inverter) Series" equipped with an inverter! This machine qualifies for the tax incentive program for productivity-enhancing capital investment, allowing for preferential tax treatment!! In recent years, the environment surrounding energy has changed significantly, and companies' efforts and awareness regarding energy conservation and power saving have increased. By equipping the cold water circulation device (chiller) with an inverter, energy-saving operation has become possible. By controlling the compressor according to the situation, whether the production load is high or low, significant reductions in power consumption can be achieved. We offer 10 models ranging from 3 horsepower to 60 horsepower, making it the first in the industry. This allows for a maximum reduction in power consumption of 48% (compared to conventional machines) and dramatically improves temperature stability through PID control (automatic control method). We expect widespread application in various sectors of the chemical, medical, and food industries that require temperature control for plastics, rubber, and raw materials (liquids, powders, slurries, etc.). The cold water circulation devices (chillers) from 10HP to 60HP come standard with the Dynaclean-D water treatment device, which suppresses scale in the water circuit without chemical processing. For the 3HP and 5HP models, this can be offered as an option.

Currently on sale is the cold water circulation device "KCWIII-IV (Inverter) Series" equipped with an inverter! This machine qualifies for the tax incentive program for productivity-enhancing capital investment, allowing for preferential tax treatment!! In recent years, the environment surrounding energy has changed significantly, and companies' efforts and awareness regarding energy conservation and power saving have increased even more. By equipping the cold water circulation device (chiller) with an inverter, energy-saving operation has become possible. By controlling the compressor according to the situation, whether the production load is high or low, significant reductions in power consumption can be achieved. We offer 10 models ranging from 3 horsepower to 60 horsepower, making it the first in the industry. It allows for a maximum reduction in power consumption of 48% (compared to conventional models), and the temperature stability is dramatically improved through PID control (automatic control method). There are expectations for expansion into various fields in the chemical, medical, and food industries that require temperature control of plastics, rubber, and raw materials (liquids, powders, slurries, etc.). The cold water circulation devices (chillers) from 10HP to 60HP come standard with the Dynaclean-D water treatment device, which suppresses scale in the water circuit without chemical treatment. For 3HP and 5HP models, options are available to accommodate this feature.

The "TES Series" is a system that allows for instantaneous switching of the medium temperature in the mold between high and low. It not only shortens the molding cycle but also makes weld lines less visible and improves precision, gloss, and strength. It is ideal for precision molding of light guide plates and lenses, as well as thick-walled products and exterior parts. It is especially effective for filler-based and foamed materials! Instantly switch the medium temperature in the mold between high and low! Shorten the molding cycle! Improve precision!