• 

  Air-cooled chiller and temperature control unit [KCA series](1)

  ◆◆Improved operability and visibility with the adoption of a touch panel◆◆ ◆◆Standard equipped with MODBUS communication and SPI communication◆◆ No cooling water required, ideal for electric injection molding machines! Air-cooled compact temperature control unit. Uses environmentally friendly refrigerant R407C! This is an air-cooled temperature control unit that does not require cooling water. 【Features】 ☆Achieves compactness!! →Installation area reduced by 20%, product volume reduced by 30% (compared to 1 horsepower current model) ☆Improved maintainability →Maintenance of the float tank is possible from the back ○Simultaneous use of medium/cooling water possible ○Operating temperature range: 10℃ to 95℃ ○Medium: Clean water ○No cooling water required ○Ideal for electric motors

• 

  Air-cooled small chiller [KCA-L series](1)

  ◆◆Improved operability and visibility with touch panel adoption◆◆ ◆◆Standard equipped with MODBUS communication and SPI communication◆◆ - No primary side cooling water required - Evolved into multifunctional and high-performance - Compact design Operating temperature range: {7℃ to 30℃} Medium: {Clean water} 1. Evolved into multifunctional and high-performance 2. Compact design *Compared to current 1 horsepower 3. No primary side cooling water required 4. Uses environmentally friendly refrigerant R407C

• 

  Cold Water Circulation Device "KCW-CA Series"(1)

  ◆◆Improved operability and visibility with touch panel adoption◆◆ ◆◆Standard equipped with MODBUS communication and SPI communication◆◆ For customers with low tower water temperatures in winter!! The chiller's power consumption dramatically decreases!! The 'KCW-CA (Cooling Assist) Series' automatically determines when the tower cooling water temperature is low compared to the chiller's set water temperature and cools the tank water with tower water. Additionally, for energy conservation, you can benefit from tax incentives for promoting capital investment in productivity improvement equipment! With a wide lineup ranging from 10 horsepower to 60 horsepower, you can choose according to your application. Moreover, since it is compatible with conventional models, piping connections are easy and can be easily replaced. 【Features】 ■ Energy-saving (power consumption reduced by up to 65% to 83% compared to conventional models) ■ When the cooling water temperature is more than 10°C lower than the set water temperature, the cooling unit's power is zero ■ Supports compressor operation even when the temperature difference is below 10°C ■ Indirect cooling stabilizes water quality *For more details, please download the catalog or contact us.

• 

  Cold Water Circulation Device "KCW-IV (Inverter) Series"(1)

  ◆◆Improved operability and visibility with touch panel adoption◆◆ ◆◆Standard equipped with MODBUS communication and SPI communication◆◆ ○Inverters are mounted on KCW, offering models ranging from 3 horsepower to 60 horsepower! ○Eligible for tax incentives for investment in production enhancement equipment! Medium temperature range: {7℃ to 30℃} Medium: {Clean water} Cooling models: fza-IV series (7℃ to 30℃) A cooling water circulation device capable of supplying large flow rates to mold water channels under various conditions Available in small standard, medium standard, and large standard models 【Features】 ○Energy-saving (power consumption reduced by up to 41-79% compared to conventional models) ○Dramatic improvement in temperature stability through PID control (automatic control method) ○Standard equipped with Dynaclean and NDeo (circulating water rust suppression device)! (*For models over 10 horsepower) ○High compatibility with conventional models achieved (machine dimensions and piping arrangements remain unchanged) For more details, please contact us or refer to the catalog.

• 

  Heat Transfer Medium (Oil) Circulation Device KCO Series(0)

  ◆◆Improved operability and visibility with touch panel adoption◆◆ ◆◆Standard equipped with MODBUS communication and SPI communication◆◆ Usable at a maximum medium temperature of 320℃! High-temperature thermal medium circulation device. It is a heating temperature control device using oil as the medium. Maximum operating temperatures: 160℃, 200℃, 250℃, 300℃, 320℃ *Please choose a model based on the above temperatures. *Heater capacities of 50kW and above are also available. For more details, please contact us or refer to the catalog.

• 

  Temperature control system with integrated heating and cooling for molds [TES Series](1)

  Mold temperature switching system that instantly switches between high and low media temperatures. Maximum operating temperature: 180°C (water) 300°C (oil) *Please choose from two types: one for water media and one for oil media. This system instantly switches the media temperature to the mold between high and low. ● Ideal for precision molding of light guide plates, lenses, etc. ● Perfect for thick-walled products and exterior parts ● Particularly effective for filler-based and foamed materials For more details, please contact us or refer to the catalog.

• 

  Mold Rapid Heating and Cooling System 'TES-STEAM'(1)

  A system that instantaneously switches between steam (high temperature) and cooling water (low temperature) for temperature control targets. 1. Weldless production of thick plastic molded products and exterior parts. 2. Temperature control for molds used in thermal press molding of CFRP and other materials. <Effects> 1. Elimination of welds. 2. High gloss finish on product surfaces. 3. Elimination of silvering in foam molding. 4. Improved transferability of fine shapes.

• 

  Circulating Water Rust Inhibition Device "DynaClean N Deo"(1)

  The circulating water rust suppression device "DynaClean N Deo" powerfully suppresses iron rust in pipes, molds, heat exchangers, etc., by reducing the dissolved oxygen in circulating water. It has obtained a patent for its uniquely developed spraying method!! *PAT.No.5953114 (Japan) / PAT.ZL 2012 8 0073183.9 (China) 【Features】 ● High-efficiency deoxygenation device that suppresses rust A nitrogen gas deoxygenation device that has been made more efficient through a uniquely developed spraying method. ● No chemicals used The nitrogen gas deoxygenation device does not require wastewater treatment. ● Compact design for space-saving No large-scale piping or installation work is needed. It can also be adapted to existing equipment. ● A lineup that accommodates various equipment From small units that do not require power to large units with built-in peripheral devices. ○ Lineup 1. Built-in KCW type N1000-20K 2. Built-in ECO type N1000-20E / N2000-60E / N4000-120E 3. Standalone type N1000-20S / N2000-60S / N4000-120S Installation location: Indoor / Outdoor For more details, please download the catalog and check.

• 

  Heating and Cooling Chiller / Temperature Control Unit KCW Series(1)

  ◆◆Improved operability and visibility with the adoption of a touch panel◆◆ ◆◆Standard equipped with MODBUS communication and SPI communication◆◆ An environmentally friendly chiller and temperature control unit capable of supplying large flow rates to mold water channels under various conditions. Medium temperature range: 1. Cooling type: L series (7℃ to 30℃) 2. Both heating and cooling: HL series (10℃ to 95℃) Medium: {Clean water} Standard equipped with a circulation water rust suppression device, Dynaclean NDeo! A chiller and temperature control unit capable of supplying large flow rates to mold water channels under various conditions. Compact standard model and medium standard model.

• 

  Hot Medium (Water) Warm Water Circulation Device KCT Series(0)

  ◆◆Improved operability and visibility with touch panel adoption◆◆ ◆◆Standard equipped with MODBUS communication and SPI communication◆◆ Maximum 180℃! High heating efficiency significantly reduces heating time! This is a heating temperature control device using clean water as the medium. It offers high precision and stability, with high heating efficiency that greatly shortens the heating time of molds. 1. Uses electric heaters to control the medium (water) temperature with high precision. 2. Electric heater capacities range from 3kW to 78kW. 3. Can be manufactured up to 200kW. 4. Maximum medium temperature can be controlled up to 180℃.

• 

  Negative Pressure Mold Temperature Control Unit [KCL Series](0)

  By using negative pressure circulation, high efficiency and high operability are achieved. ◆◆ Improved operability and visibility with the adoption of a touch panel ◆◆ ◆◆ Standard equipped with MODBUS communication and SPI communication ◆◆ 【Features】 ○ Smooth temperature management even in details that could not pass water before ○ No worries about water leakage, and the diameter of the cooling water hole can be obtained, significantly improving cooling efficiency ○ It is possible to pass the medium from the movable side to the fixed side, making cooling of the sliding core movable part easy ○ Maintenance-free achieved by the venturi mechanism; medium temperature can be precisely controlled with PID control!

• 

  Environmentally Friendly Temperature Management System "DynaEco Water System"(1)

  A cooling system for factories that can accommodate any type of factory, allowing the existing temperature control equipment to be used as is. **Features** ○ Safety & Ecology - Does not use any chemicals, thus having no negative impact on the environment - An environmentally adaptive temperature control system that considers ISO 14001 and green procurement ○ Non-Chemical - No chemicals or ethylene glycol are used in the cooling water; instead, general water (tap water, industrial water, groundwater) is circulated for water quality and temperature management - Maintains a comfortable state for both new and existing piping with scale removal and rust suppression effects ○ Cost Reduction - Wastewater treatment for non-chemical water quality and temperature management - Reduces running costs by eliminating the need for chemical replacements ○ A cooling system for factories that can accommodate any type of factory

• 

  Air-cooled chiller (outdoor type) without cooling water piping [MCA series](1)

  High-performance tank-type air-cooled chiller that achieves simplification and energy savings 【Features】 1. Wide temperature control range… Usable in a wide temperature range from 6°C (9°C) to 35°C 2. No cooling water piping required… Adoption of air-cooled refrigeration units eliminates the need for cooling equipment such as cooling towers, thus no cooling water piping is necessary 3. Standard automatic operation circuit for freeze prevention pump 4. Scheduled operation function… Can turn on and off at set times

Product/Service List (4)