This issue has been resolved. (Issue) "Clogging of nozzles and defective products due to chips from cast iron cutting!" This is a case study regarding the recovery of sludge from coolant in cutting processes. We hope this serves as a reference for those facing similar challenges. - Company Name: Company I - Issue: "Clogging of nozzles and defective products due to chips from cast iron cutting!" ★ For more details, please be sure to check the "Case Study Catalog." ☆ We can provide proposals based on usage conditions and installation environments in collaboration with the manufacturer.

This is a case study regarding the recovery of coolant sludge in grinding processes, addressing common issues. We hope it serves as a reference for those facing similar challenges. - Company Name: Company N - Issue: "The current product we are using is unsatisfactory in terms of durability and filtration accuracy!" ★ For more details, please be sure to check the "Case Study Catalog." ☆ We can provide proposals based on usage conditions and installation environments in collaboration with the manufacturer.

【New Application】Introducing a case where ceramic deposition was reduced and pipe clogging was improved in the manufacturing of multilayer ceramic capacitors (MAG PICKER wet application) 1. Overview In the manufacturing process of multilayer ceramic capacitors, the ceramic deposition in pipes generated during the post-processing of layer cuttings and scraps has been reduced. - Approximately 30% recovery of non-magnetic ceramics along with magnetic materials - Decrease in the concentration of non-magnetic materials in the liquid 2. Target Industries - Manufacturers of multilayer ceramic capacitors, chemical, materials, and chemical-related companies, etc. 3. Target Issues ▲ Ceramic deposits in pipes causing pipe clogs, etc. 4. Results After Implementation ◎ Repair costs for pipe cleaning and replacement, which amounted to several million yen annually, have been reduced. ☆ Please download the "catalog" to check the specifications. ★ Evaluation units are available for loan upon arrangement. ---------------------------------------- ◇ Sales Agency - Sanotec Co., Ltd. - Email: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Tech Co., Ltd. (explanations available from the manufacturer)

【New Application】Introducing a case where "arsenic" contained in contaminated sludge was removed to below environmental standards (MAG PICKER / utilizing wet method) 1. Overview A new technology using a permanent magnet drum-type magnetic separator for the removal of "arsenic" from contaminated sludge generated by construction and other activities. - Recovery of iron powder adsorbed with arsenic using a permanent magnet drum-type magnetic separator. - Removal of arsenic to below environmental standards, safely utilizing the treated sludge. 2. Target Industries General contractors, industrial waste treatment companies, and other companies related to soil purification. 3. Target Issues ▲ Contaminated sludge and soil require appropriate disposal, among other concerns. 4. Results After Implementation ◎ Arsenic levels below environmental standards; iron powder recovery (over 98%). ◎ Safe utilization of treated sludge. ☆ Please download the "catalog" to check the specifications. ★ Evaluation equipment can be loaned upon arrangement. --------------------------------------- ◇ Sales Agency - Sanotec Co., Ltd. - Email: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Technology Co., Ltd. (explanations available from the manufacturer)

【New Application】A case study of a electronic components manufacturing company achieving cost reduction in the manufacturing process of magnetic paste (using MAG PICKER/wet method) 1. Overview Continuous concentration of magnetic pastes such as nickel and ferrite, achieving appropriate moisture content. - Recovery of magnetic materials using a rotating powerful magnet drum. - Achieving appropriate moisture content by adjusting the rotation speed and pressure of the squeezing rollers. 2. Target Industries Manufacturers of electronic components and magnetic fine powders, chemical, material, and chemical-related companies, etc. 3. Target Issues ▲ As the fine particle size of magnetic powders increases, the filtration time using filters also increases, etc. 4. Results After Implementation ◎ The time required for paste generation using conventional filters has been significantly reduced. ☆ Please download the "catalog" to check the specifications. ★ Evaluation units are available for loan. --------------------------------------- ◇ Sales Agent - Sanotec Co., Ltd. - mail: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Tech Co., Ltd. (explanations can be provided by the manufacturer)

【New Application】Introducing a case where the recovery yield rate was improved in the manufacturing process of metal fine powders (utilizing MAG PICKER/wet type) 1. Overview Considering the recovery of atomized metal fine powders using magnets - Achieved target recovery rate with a permanent magnet drum-type magnetic separator - Used as a secondary recovery device for cyclone separators 2. Target Industry Metal fine powder manufacturing industry, related industries of metal fine powders, etc. 3. Target Issues ▲ Wastewater treatment is necessary even after recovering mixed particles in liquid with cyclone separators, etc. 4. Results After Implementation ◎ By utilizing the permanent magnet drum-type magnetic separator, 98% of the residuals were recovered from wastewater that was previously treated as waste ◎ Expected cost reduction effects for wastewater treatment ☆ Please download the "catalog" to check the specifications ★ Evaluation equipment can be arranged for loan -------------------------------------- ◇ Sales Agent - Sanotec Co., Ltd. - mail: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Tech Co., Ltd. (explanations available from the manufacturer)

"Super Hard and Super Precision Grinding" coolant sludge recovery is optimal! Do you have any of these concerns? ▲ Struggling to collect sludge that is hard to magnetize ▲ How can I collect fine powder sludge? The "FINE MAG/UK type" solves these issues. (Main Features) 〇 High magnetic force of 9000 Gauss (drum surface) 〇 Effective in recovering sludge that is hard to magnetize (such as super hard tool grinding)! 〇 Effective in recovering fine sludge (honing, lapping, electrical discharge machining, super finishing), etc. The "FINE MAG/UK," capable of generating a high magnetic field, is a model with high potential as a recovery device for fine magnetic metal powders. It can be used not only for chip removal generated in parts processing but also for recovering raw materials and removing impurities from fine particles, among other applications beyond grinding sludge removal. ★ For more details, please refer to the "Product Catalog." ☆ Please also check the "Grinding Processing / Problem-Solving Case Studies" (for Company T). ☆ We can collaborate with the manufacturer to provide proposals based on usage conditions and installation environments.

Do you have any of these concerns regarding grinding processing? ▲ Is there no separator that can maintain sludge recovery performance for a long time? ▲ Is there no maintenance-free separator? The "FINE MAG/K type" solves these issues. (The magnetic drum is different) Even if the magnetic force is increased, if the drum surface gets scratched, it cannot scrape off the sludge. To maintain stable performance even after long-term use, a special hardening treatment is applied to the surface of the magnetic drum, preventing scratches (patent obtained). (Other features) ◆ The squeezing roller is different! - It provides stable squeezing without slipping. ◆ The cleanliness is different! - The magnetic force on the drum surface is 16% higher compared to our conventional models. - Stabilizes product quality and reduces tank cleaning frequency. ★ For more details, please refer to the "Product Catalog." ☆ Please also check "Grinding Processing / Case Studies" (Companies A, I, and N). ☆ We can provide proposals based on usage conditions and installation environments in collaboration with the manufacturer.

The "paper filter" removes impurities such as grinding sludge and abrasive particles, and is a coolant treatment device that can be used regardless of magnetic or non-magnetic materials. Additionally, we offer a unit model that combines the "magnet separator" and "paper filter," which can be utilized for various applications such as grinding machines, honing machines, and wire drawing machines. 【Features】 1. Three types available for different applications (including models combined with magnets) 2. Capable of filtering average particles from 10μ to 95μ 3. Significantly reduces the consumption of filter paper (paper filter) ★ For more details, please check the "product catalog."

This issue has been resolved. (Issue) "The hard metal sludge in the liquid negatively affects quality; if only there were a compact separator!" This is a case study regarding the recovery of sludge from coolant liquid in hard and ultra-precision grinding processes. We hope this serves as a reference for those facing similar challenges. - Company Name: Company T - Issue: "The hard metal sludge in the liquid negatively affects quality; if only there were a compact separator!" ★ For more details, please refer to the "Case Study Catalog." ☆ We can provide proposals based on usage conditions and installation environments in collaboration with the manufacturer.

We have resolved the following issues in shaving and gear processing. ▲ "Fine particles mixed into the recovered oil-based coolant, causing wear on pumps and cutters!" This is a case study regarding the recovery of sludge from coolant in shaving and gear processing. We hope you find it useful as a reference. - Company Name: Company N - Issue: "Fine particles mixed into the recovered oil-based coolant, causing wear on pumps and cutters!" ★ For more details, please check the "Case Study Catalog." ☆ Please also refer to the "FINE MAG/KS" product catalog for gear processing. ☆ We can provide proposals based on usage conditions and installation environments in collaboration with the manufacturer.

This issue has been resolved. (Issue) "Clogging of nozzles and defective products caused by chips from cast iron cutting!" This is a case study regarding the recovery of coolant sludge in cutting processes. We hope this serves as a reference for those facing similar challenges. - Company Name: Company I - Issue: "Clogging of nozzles and defective products caused by chips from cast iron cutting!" ★ For more details, please be sure to check the "Case Study Catalog." ☆ We can provide proposals based on usage conditions and installation environments in collaboration with the manufacturer.

This is a case study regarding the recovery of coolant sludge in grinding processes, addressing common issues. We hope it serves as a reference for those facing similar challenges. - Company Name: Company N - Issue: "We are dissatisfied with the durability and filtration accuracy of the product currently in use!" ★ For more details, please be sure to check the "Case Study Catalog." ☆ We can provide proposals based on usage conditions and installation environments in collaboration with the manufacturer.

【New Application】Introducing a case where ceramic deposition was reduced and piping clogging was improved in the manufacturing of multilayer ceramic capacitors (MAG PICKER wet application) 1. Overview In the manufacturing process of multilayer ceramic capacitors, the ceramic deposition that occurs in the piping during the post-processing of laminated waste and edge materials is reduced. - Approximately 30% of non-magnetic ceramics are recovered along with magnetic materials. - The concentration of non-magnetic materials in the liquid decreases. 2. Target Industry - Manufacturers of multilayer ceramic capacitors, chemical, material, and chemical-related companies, etc. 3. Target Issues ▲ Ceramic deposits in the piping causing clogs, etc. 4. Results After Implementation ◎ The repair costs for cleaning and replacing piping, which amounted to several million yen annually, have been reduced. ☆ Please download the "catalog" to check the specifications. ★ Evaluation units are available for loan upon arrangement. ---------------------------------------- ◇ Sales Agency - Sanotec Co., Ltd. - Email: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Tech Co., Ltd. (explanations can be provided by the manufacturer)

【New Application】Introducing a case of removing "arsenic" contained in contaminated sludge to below environmental standards (MAG PICKER / utilizing wet methods) 1. Overview A new technology using a permanent magnet drum-type magnetic separator for the removal of "arsenic" from contaminated sludge generated by construction and other activities. - Recovery of iron powder adsorbed with arsenic using a permanent magnet drum-type magnetic separator. - Removal of arsenic to below environmental standards, allowing for the safe utilization of treated sludge. 2. Target Industries General contractors, industrial waste disposal companies, and other companies related to soil purification. 3. Target Issues ▲ Contaminated sludge and sediment require appropriate disposal. 4. Results After Implementation ◎ Arsenic levels below environmental standards; iron powder recovery (over 98%). ◎ Safe utilization of treated sludge. ☆ Please download the "catalog" to check the specifications. ★ Evaluation equipment can be loaned upon arrangement. --------------------------------------- ◇ Sales Agent - Sanotec Co., Ltd. - Email: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Technology Co., Ltd. (explanations available from the manufacturer)

【New Application】Introducing a case where the recovery yield rate was improved in the manufacturing process of metal fine powders (utilizing MAG PICKER/wet type) 1. Overview Considering the recovery of atomized metal fine powders using magnets - Achieved target recovery rate using a permanent magnet drum-type magnetic separator - Utilized as a secondary recovery device for cyclone separators 2. Target Industry Metal fine powder manufacturing industry, related industries of metal fine powders, etc. 3. Target Issues ▲ Wastewater treatment is necessary even after recovering mixed particles in liquid using cyclone separators, etc. 4. Results After Implementation ◎ By using a permanent magnet drum-type magnetic separator, 98% of the residuals were recovered from wastewater that was previously treated as waste ◎ Expected cost reduction effects for wastewater treatment ☆ Please download the "catalog" to check the specifications ★ Evaluation units are available for loan upon arrangement -------------------------------------- ◇ Sales Agency - Sanotec Co., Ltd. - mail: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Technology Co., Ltd. (explanations available from the manufacturer)

【New Application】Introducing a case where an electronic component manufacturing company achieved cost reduction in the manufacturing process of magnetic paste (using MAG PICKER/wet method) 1. Overview Continuous concentration of magnetic pastes such as nickel and ferrite, achieving the appropriate moisture content - Recovery of magnetic materials using a rotating powerful magnet drum - Achieving appropriate moisture content by adjusting the rotation speed and pressure of the squeezing rollers 2. Target Industry Manufacturers of electronic components and magnetic fine powders, chemical, material, and chemical-related companies, etc. 3. Target Issues ▲ As the fine particle size of magnetic powders increases, the filtration time using filters also increases, etc. 4. Results After Implementation ◎ The time required for paste generation using conventional filters has been significantly reduced ☆ Please download the "catalog" to check the specifications ★ Evaluation equipment can be loaned upon arrangement --------------------------------------- ◇ Sales Agency - Sanotec Co., Ltd. - mail: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Tech Co., Ltd. (explanations available from the manufacturer)

Do you have any of these concerns regarding grinding processing? ▲ Is there no separator that can maintain sludge recovery performance for a long time? ▲ Is there no maintenance-free separator? The "FINE MAG/K type" solves these issues. (Different magnetic drum) Even if the magnetic force is increased, if the drum surface gets scratched, it cannot scrape off the sludge. To maintain stable performance even after long-term use, we apply a special hardening treatment to the drum surface, preventing scratches (patent obtained). (Other features) ◆ The squeezing roller is different! - It provides stable squeezing without slipping. ◆ The cleanliness is different! - Magnetic force on the drum surface is 16% higher compared to our conventional products. - Stabilizes product quality and reduces tank cleaning frequency. ★ For more details, please refer to the "Product Catalog." ☆ Please also check the "Grinding Processing / Problem-Solving Case Studies" (Companies A, I, and N). ☆ We can provide proposals based on usage conditions and installation environments in collaboration with the manufacturer.

Optimal for recovering sludge from coolant liquid in 'super hard and super precision grinding processing'! Do you have any of these concerns? ▲ Struggling to recover sludge that is difficult to magnetize ▲ How can I recover fine powder sludge? The 'FINE MAG/UK type' solves these issues. (Main Features) 〇 High magnetic force of 9000 Gauss (drum surface) 〇 Effective in recovering sludge that is difficult to magnetize (such as super hard tool grinding processing)! 〇 Effective in recovering fine sludge (honing, lapping, electrical discharge machining, super finishing), etc. The 'FINE MAG/UK', capable of generating a high magnetic field, has high potential as a recovery device for fine magnetic metal powders. It can be used not only for chip removal generated in parts processing but also for recovering raw materials and removing impurities from fine particles, among other applications beyond grinding sludge removal. ★ For more details, please refer to the 'Product Catalog' ☆ Also, please check the 'Grinding Processing / Problem-Solving Case Studies' (Company T) ☆ We can collaborate with the manufacturer to provide proposals based on usage conditions and installation environments.

The "paper filter" removes impurities such as grinding sludge and abrasive particles, and is a coolant treatment device that can be used regardless of magnetic or non-magnetic materials. Additionally, we offer a unit model that combines the "magnet separator" and "paper filter," which can be utilized for various applications such as grinding machines, honing machines, and wire drawing machines. 【Features】 1. Three types available for different applications (including models combined with magnets) 2. Capable of filtering average particles from 10μ to 95μ 3. Significantly reduces the consumption of filter paper (paper filter) ★ For more details, please check the "product catalog."

【New Application】Introducing a case study that reduces ceramic deposition and improves pipe clogging in the manufacturing of multilayer ceramic capacitors (MAG PICKER wet application) 1. Overview In the manufacturing process of multilayer ceramic capacitors, it reduces ceramic deposition in pipes that occurs during post-processing of layered scrap and edge materials. - Approximately 30% recovery of non-magnetic ceramics along with magnetic materials - Decrease in the concentration of non-magnetic materials in the liquid 2. Target Industries - Manufacturers of multilayer ceramic capacitors, chemical, materials, and chemical-related companies, etc. 3. Target Issues ▲ Ceramic deposition in pipes causing pipe clogging, etc. 4. Results After Implementation ◎ Reduction in repair costs for pipe cleaning and replacement, which amounted to several million yen annually. ☆ Please download the "catalog" to check the specifications. ★ Evaluation units are available for loan upon arrangement. ---------------------------------------- ◇ Sales Agent - Sanotec Co., Ltd. - Email: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Tech Co., Ltd. (explanations available from the manufacturer)

【New Application】Introducing a case of removing "arsenic" contained in contaminated sludge to below environmental standards (MAG PICKER / utilizing wet method) 1. Overview A new technology using a permanent magnet drum-type magnetic separator for the removal of "arsenic" from contaminated sludge generated by construction and other activities. - Recovery of iron powder adsorbed with arsenic using a permanent magnet drum-type magnetic separator. - Removal of arsenic to below environmental standards, safely utilizing the treated sludge. 2. Target Industries General contractors, industrial waste disposal industry, and other companies related to soil purification. 3. Target Issues ▲ Contaminated sludge and soil require appropriate disposal. 4. Results After Implementation ◎ Arsenic levels below environmental standards; iron powder recovery (over 98%). ◎ Safe utilization of treated sludge. ☆ Please download the "catalog" to check the specifications. ★ Evaluation equipment can be loaned upon arrangement. --------------------------------------- ◇ Sales Agency - Sanotec Co., Ltd. - Email: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Technology Co., Ltd. (explanations available from the manufacturer)

【New Application】Introducing a case where the recovery yield rate was improved in the manufacturing process of metal fine powders (utilizing MAG PICKER/wet type) 1. Overview Considering the recovery of atomized metal fine powders using magnets - Achieved target recovery rate with a permanent magnet drum-type magnetic separator - Used as a secondary recovery device for cyclone separators 2. Target Industry Metal fine powder manufacturing industry, related industries of metal fine powders, etc. 3. Target Issues ▲ Wastewater treatment is necessary even after recovering mixed particles in liquid with cyclone separators, etc. 4. Results After Implementation ◎ By using a permanent magnet drum-type magnetic separator, 98% of the residuals were recovered from wastewater that was previously treated as waste ◎ Expected cost reduction effects in wastewater treatment ☆ Please download the "catalog" to check the specifications ★ Evaluation equipment can be loaned upon arrangement -------------------------------------- ◇ Sales Agency - Sanotec Co., Ltd. - mail: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Tech Co., Ltd. (explanations available from the manufacturer)

【New Application】Introducing a case where an electronic component manufacturing company achieved cost reduction in the manufacturing process of magnetic paste (using MAG PICKER/wet method) 1. Overview Continuous concentration of magnetic paste such as nickel and ferrite, achieving the appropriate moisture content. - Recovery of magnetic materials using a rotating powerful magnet drum. - Achieving the appropriate moisture content by adjusting the rotation speed and the pressure of the squeezing roller. 2. Target Industries Manufacturers of electronic components and magnetic fine powders, chemical, materials, and chemical-related companies, etc. 3. Target Issues ▲ As the fine particle size of magnetic powders increases, the filtration time using filters also increases, etc. 4. Results After Implementation ◎ The time required for paste generation using conventional filters has been significantly reduced. ☆ Please download the "catalog" to check the specifications. ★ Evaluation equipment can be loaned upon arrangement. --------------------------------------- ◇ Sales Agency - Sanotec Co., Ltd. - Email: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Tech Co., Ltd. (explanations available from the manufacturer)

【New Application】Introducing a case where the recovery yield rate was improved in the manufacturing process of metal fine powders (utilizing MAG PICKER/wet type) 1. Overview Considering the recovery of atomized metal fine powders using magnets - Achieved target recovery rate with a permanent magnet drum-type magnetic separator, etc. 2. Target Industries Metal fine powder manufacturing industry, related industries of metal fine powders, etc. 3. Target Issues ▲ Wastewater treatment is necessary even after recovering mixed particles in liquid with a cyclone separator, etc. 4. Results After Implementation ◎ By utilizing a permanent magnet drum-type magnetic separator, 98% of the residuals were recovered from wastewater that was previously treated as waste. ◎ Significantly reduced the amount of metal fine powder residue in wastewater, leading to expected cost reduction effects in wastewater treatment. ☆ Please download the "catalog" to check the specifications. ★ Evaluation equipment can be arranged for loan. --------------------------------------- ◇ Sales Agency - Sanotec Co., Ltd. - mail: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Tech Co., Ltd. (explanations available from the manufacturer)

In today's world where product lifespans are becoming shorter, "first-in, first-out management," which makes it difficult for "long-term stagnant items" to occur, is important! We propose systematization. ◆ About the systematization of "first-in, first-out management" (Overview) 1. About "first-in, first-out" management - Overview: A method of shipping and dispensing items in the order they were received. This is implemented for the receipt and shipment of raw materials, parts, products, and semi-finished goods. - Advantages: ◎ It is difficult for "long-term stagnant items" to occur. ◎ It helps prevent "quality deterioration" and "obsolescence," among other benefits. - Disadvantages: ▲ Management of "date / item code / quantity / storage location" is necessary. 2. Other main methods of "dispensing management" ◆ About the "last-in, first-out method" - Advantages / Disadvantages ◆ About the "random method" - Advantages / Disadvantages 3. Key points of "systematization" - Three key points (barcode / terminal / information management) 4. Operational image of "systematization" - Operational image of the three key points in "systematization" ★ We would appreciate it if you could download the materials and refer to them.

For smooth production, "location management," which clearly indicates where, how many, and what is needed, is essential! We propose systematization. ◆ About the systematization of "location management" (Overview) 1. About "location management" - Overview: A method of managing the placement of specified items (fixed items) in designated locations (fixed locations) in specified quantities (fixed quantities). - Benefits: ◎ "Items necessary for production" can be retrieved immediately. ◎ Inventory information for "items necessary for production" can be quickly understood, etc. - Drawbacks: ▲ Management of the "three fixed (fixed location / fixed item / fixed quantity)" information is required. 2. Methods of "location management" ◇ About the "free location system" ◇ About the "fixed location system" 3. Key points of "systematization" - Three key points (barcode / terminal / information management) 4. Image of operation for "systematization" - Operational image of the three key points' "systematization" ★ We would appreciate it if you could download the materials and refer to them.

Optimal for sludge recovery of coolant liquid in 'super hard and super precision grinding processing'! Do you have any of these concerns? ▲ Struggling to recover sludge that is hard to magnetize ▲ How can I recover fine powder sludge? These challenges are solved by the 'FINE MAG/UK type'. (Main Features) 〇 High magnetic force of 9000 Gauss (drum surface) 〇 Effective in recovering sludge that is hard to magnetize (such as super hard tool grinding)! 〇 Effective in recovering fine sludge (such as honing, lapping, discharge machining, and super finishing)! The 'FINE MAG/UK', capable of generating a high magnetic field, is a model with high potential as a recovery device for fine magnetic metal powders. It can be used not only for chip removal generated in parts processing but also for recovering raw materials and removing impurities from fine particles, among other applications beyond grinding sludge removal. ★ For more details, please refer to the 'Product Catalog' ☆ Also, please check the 'Grinding Processing / Problem Solving Case Studies' (for Company T) ☆ We can collaborate with the manufacturer to provide proposals based on usage conditions and installation environments.

Do you have any of these concerns regarding grinding processing? ▲ Is there no separator that can maintain sludge recovery performance for a long time? ▲ Is there no maintenance-free separator? The "FINE MAG/K type" solves these issues. (The magnetic drum is different) Even if the magnetic force is increased, if the drum surface gets scratched, it cannot scrape off the sludge. To maintain stable performance even after long-term use, we apply a special hardening treatment to the drum surface, preventing scratches (patent obtained). (Other features) ◆ The squeezing roller is different! - It provides stable squeezing without slipping. ◆ The cleanliness is different! - The magnetic force on the drum surface is 16% higher compared to our conventional models. - Stabilizes product quality and reduces tank cleaning frequency. ★ For more details, please refer to the "Product Catalog." ☆ Please also check the "Grinding Processing / Problem-Solving Case Studies" (Companies A, I, and N). ☆ We can collaborate with manufacturers to provide proposals based on usage conditions and installation environments.

The "Paper Filter" removes impurities such as grinding sludge and abrasives, and is a coolant treatment device that can be used regardless of magnetic or non-magnetic materials. Additionally, we offer a unit model that combines the "Magnet Separator" and "Paper Filter," which can be utilized for various applications such as grinding machines, honing machines, and wire drawing machines. 【Features】 1. Three types available for different applications (including models combined with magnets) 2. Capable of filtering average particles from 10μ to 95μ 3. Significantly reduces the consumption of filter paper (paper filter) ★ For more details, please check the "Product Catalog."