サンワ・エンタープライズ Official site

It is small enough to fit in the palm of your hand, yet capable of powerful vacuuming and blowing.

Typically, a 6mm diameter air tube utilizes the full output of a 10 horsepower (7.5KW) compressor, and the noise level exceeds 100 dBA. The "740 Series" amplifies compressed air by four times, allowing for the same blowing effect with only a quarter of the compressed air when using a 6mm nozzle, while also reducing the noise level to 76 dBA. Additionally, the powerful vacuum pressure generated at the rear can be applied to the suction and exhaust of fumes, toxic gases, air, and the air transport of powders. By simply loosening the lock ring and rotating the discharge section, the internal slit width can be freely adjusted, allowing for optimal operating conditions in conjunction with the adjustment of supply pressure. It is ideal for replacing conventional nozzles with a diameter of 4mm or more.

No power supply needed. This is a cabinet cooling (heat dissipation) dedicated spot cooler that operates solely on compressed air.

【Features】 ● Compact and lightweight; extremely easy to install and operate ● No power supply needed; operates on compressed air from the factory ● Does not use any refrigerants or chemicals

Suction and blow, two functions in one device. It is a tool that enables powerful vacuuming and blowing.

【Features】 ■ Supports two functions: vacuuming and blowing ■ Adjustable air discharge volume and air pressure ■ Easy to install and maintenance-free

A compact spot cooler that generates ultra-low temperature air with a maximum temperature difference of -75°C just by connecting compressed air.

● Discharges ultra-low temperature air just by connecting compressed air ● Compact and lightweight; installation and operation are extremely simple ● Easy real-time on/off control ● Does not use any power supply, refrigerant gas, or chemicals * For more details, please refer to the invitation for each exhibition available for download in PDF.

Cool it! Blow it away! Send it! Sanwa pneumatic equipment is an air tool that enables cooling, blowing, drying, and transfer simply by connecting compressed air.

【Main Products】 ● Ultra-low temperature air generator "Kolder" ... Generates ultra-low temperature air at -50°C simply by connecting compressed air. (Model 190-75SV, with supply compressed air temperature at 15°C and pressure at 0.7Mpa) ● Layered airflow generator "Line Blow" ... A nozzle that significantly amplifies the supplied compressed air to create a uniform slit-shaped airflow. ● Annular airflow generator "Round Blow" ... A nozzle that applies the amplification function of the supplied air to enable three functions in one: "blow," "suction," and "air transport." ● Various nozzles ... Compact nozzles convenient for "draining," "drying," and "blowing away." Each type reduces air consumption by amplifying the supplied air. ● Inline air heater ... An inline heater that achieves high efficiency and high responsiveness by directly heating the air. It features a robust stainless steel body and incorporates a honeycomb ceramic structure inside.

It was manufactured for the purpose of air transportation using compressed air. During operation, it does not require a power supply, making it suitable for use in explosive environments.

【Features】 - Super powerful air transport just by connecting compressed air - Easy installation and handling - Durable material, maintenance-free - Choose between aluminum and stainless steel according to application