サンワ・エンタープライズ Official site

A compact spot cooler that generates ultra-low temperature air with a maximum temperature difference of -75°C just by connecting compressed air.

● Discharges ultra-low temperature air just by connecting compressed air ● Compact and lightweight; installation and operation are extremely simple ● Easy real-time on/off control ● Does not use any power supply, refrigerant gas, or chemicals * For more details, please refer to the invitation for each exhibition available for download in PDF.

No power supply needed. This is a cabinet cooling (heat dissipation) dedicated spot cooler that operates solely on compressed air.

【Features】 ● Compact and lightweight; extremely easy to install and operate ● No power supply needed; operates on compressed air from the factory ● Does not use any refrigerants or chemicals

It was manufactured for the purpose of air transportation using compressed air. During operation, it does not require a power supply, making it suitable for use in explosive environments.

【Features】 - Super powerful air transport just by connecting compressed air - Easy installation and handling - Durable material, maintenance-free - Choose between aluminum and stainless steel according to application

This is a tool designed for blowing around pipes and cables. The air flow that blows out evenly at 360° enables drainage, cleaning, and drying.

【Features】 ■ No wiper blades, non-contact operation ■ Significantly reduced noise/vibration ■ Easy installation and maintenance-free

The Coanda effect generates a thin, uniform curtain-like laminar flow. Its applications are diverse, including drainage, drying, heat dissipation blowing, and cooling.

■Main Features - Generates a uniform air curtain simply by connecting to a compressor's compressed air - Amplifies air volume by drawing in surrounding air through an amplification mechanism, significantly reducing noise - Simple and robust structure reduces maintenance effort - Two types available depending on application: aluminum and stainless steel ● For more details, please contact us or download the catalog.

Suction and blow, two functions in one device. It is a tool that enables powerful vacuuming and blowing.

【Features】 ■ Supports two functions: vacuuming and blowing ■ Adjustable air discharge volume and air pressure ■ Easy to install and maintenance-free

It is small enough to fit in the palm of your hand, yet capable of powerful vacuuming and blowing.

Typically, a 6mm diameter air tube utilizes the full output of a 10 horsepower (7.5KW) compressor, and the noise level exceeds 100 dBA. The "740 Series" amplifies compressed air by four times, allowing for the same blowing effect with only a quarter of the compressed air when using a 6mm nozzle, while also reducing the noise level to 76 dBA. Additionally, the powerful vacuum pressure generated at the rear can be applied to the suction and exhaust of fumes, toxic gases, air, and the air transport of powders. By simply loosening the lock ring and rotating the discharge section, the internal slit width can be freely adjusted, allowing for optimal operating conditions in conjunction with the adjustment of supply pressure. It is ideal for replacing conventional nozzles with a diameter of 4mm or more.

"Blow," "drain," "dry" - spot blow with amplified air.

We offer a lineup ranging from pencil-type to flat-type. Each of them creates an amplified blow flow from the compressed air consumed, demonstrating effectiveness in cooling, blowing away, and other applications.