【Tokyo Event: For 3 Days Starting Tomorrow】Cooling, Transporting, Blowing Away! We will hold a special exhibition of Sanwa Pneumatic Equipment.

サンワ・エンタープライズ

We will be showcasing our proud air pressure equipment from Sanwa, themed around "cooling," "sucking," "blowing away," and "transporting," in various sizes and materials, utilizing compressed air. Please take this opportunity to see and touch the actual products, and verify their sizes and materials! On the day of the event, specialized sales representatives will also be present. We hope you can use this opportunity as a hint for improving your company's equipment. Additionally, we will have a special display of the following two noteworthy products: 1) New product: Rust-resistant stainless steel model of the cylindrical airflow generator "Circle Blow." 2) Reference display: The first public showing of a reference video for a groundbreaking static elimination system scheduled for completion within the year! <Date and Venue> Date: August 7 (Wednesday) to August 9 (Friday), 2019 11:00 AM to 5:00 PM (last admission at 4:00 PM) Venue: Sanwa Enterprise Satellite Showroom 5th floor, South-5, TIME24 Building, 2-4-32 Aomi, Koto-ku, Tokyo Advance reservation: *Please make a reservation in advance when visiting. >>TEL: 048-871-0501<< For more details, please check the attached PDF. All of our staff look forward to your visit.

Date and time Wednesday, Aug 07, 2019 ～ Friday, Aug 09, 2019
11:00 AM ～ 05:00 PM
The last acceptance is until 16:00.
Capital 2-4-32 Aomi, Koto-ku, Tokyo, TIME24 Building, 5th Floor, South-5 ◆ About a 2-minute walk from the Yurikamome "Telecom Center" Station ◆ About an 18-minute walk from the Rinkai Line "Tokyo Teleport" Station Operates on weekdays only; about a 3-minute ride on the free shuttle bus from Tokyo Teleport Station
Entry fee Free

Related product information

Spot Cooling Device | Ultra-Low Temperature Air Generator "Kolder" (Video Available)
A compact spot cooler that generates ultra-low temperature air with a maximum temperature difference of -75°C just by connecting compressed air.

● Discharges ultra-low temperature air just by connecting compressed air ● Compact and lightweight; installation and operation are extremely simple ● Easy real-time on/off control ● Does not use any power supply, refrigerant gas, or chemicals * For more details, please refer to the invitation for each exhibition available for download in PDF.
Cabinet Cooling Dedicated Cooler | Cabinet Cooler (with video)
No power supply needed. This is a cabinet cooling (heat dissipation) dedicated spot cooler that operates solely on compressed air.

【Features】 ● Compact and lightweight; extremely easy to install and operate ● No power supply needed; operates on compressed air from the factory ● Does not use any refrigerants or chemicals
Small Pneumatic Equipment | Air Volume Amplifying Type "Line Blow" (Video Available)
The Coanda effect generates a thin, uniform curtain-like laminar flow. Its applications are diverse, including drainage, drying, heat dissipation blowing, and cooling.

■Main Features - Generates a uniform air curtain simply by connecting to a compressor's compressed air - Amplifies air volume by drawing in surrounding air through an amplification mechanism, significantly reducing noise - Simple and robust structure reduces maintenance effort - Two types available depending on application: aluminum and stainless steel ● For more details, please contact us or download the catalog.
Small Pneumatic Equipment | Air Amplification Air Blow Nozzle "Round Blow"
Suction and blow, two functions in one device. It is a tool that enables powerful vacuuming and blowing.

【Features】 ■ Supports two functions: vacuuming and blowing ■ Adjustable air discharge volume and air pressure ■ Easy to install and maintenance-free
Small Pneumatic Equipment | Cylindrical Airflow Generator "Circle Blow"
This is a tool designed for blowing around pipes and cables. The air flow that blows out evenly at 360° enables drainage, cleaning, and drying.

【Features】 ■ No wiper blades, non-contact operation ■ Significantly reduced noise/vibration ■ Easy installation and maintenance-free
Small Pneumatic Equipment | Air Volume Amplifier "Jet Blow"
It is small enough to fit in the palm of your hand, yet capable of powerful vacuuming and blowing.

Typically, a 6mm diameter air tube utilizes the full output of a 10 horsepower (7.5KW) compressor, and the noise level exceeds 100 dBA. The "740 Series" amplifies compressed air by four times, allowing for the same blowing effect with only a quarter of the compressed air when using a 6mm nozzle, while also reducing the noise level to 76 dBA. Additionally, the powerful vacuum pressure generated at the rear can be applied to the suction and exhaust of fumes, toxic gases, air, and the air transport of powders. By simply loosening the lock ring and rotating the discharge section, the internal slit width can be freely adjusted, allowing for optimal operating conditions in conjunction with the adjustment of supply pressure. It is ideal for replacing conventional nozzles with a diameter of 4mm or more.
Inline Air Transport Unit | Conveyor Back (with video)
It was manufactured for the purpose of air transportation using compressed air. During operation, it does not require a power supply, making it suitable for use in explosive environments.

【Features】 - Super powerful air transport just by connecting compressed air - Easy installation and handling - Durable material, maintenance-free - Choose between aluminum and stainless steel according to application
Blow nozzle hose | Stay hose
No tools needed, anyone can freely position it.

A flexible copper rod is brazed inside one side of the high-pressure hose fitting. Total length (mm): 150, 200, 300, 450, 600 Outer diameter (mm): 16 Primary side (IN): R1/4 female thread Secondary side (OUT): R1/8 male thread
Nozzle | Air Amplifying Air Nozzle
"Blow," "drain," "dry" - spot blow with amplified air.

We offer a lineup ranging from pencil-type to flat-type. Each of them creates an amplified blow flow from the compressed air consumed, demonstrating effectiveness in cooling, blowing away, and other applications.
Comprehensive Catalog | Sanwa Pneumatic Equipment
Cool it! Blow it away! Send it! Sanwa pneumatic equipment is an air tool that enables cooling, blowing, drying, and transfer simply by connecting compressed air.

【Main Products】 ● Ultra-low temperature air generator "Kolder" ... Generates ultra-low temperature air at -50°C simply by connecting compressed air. (Model 190-75SV, with supply compressed air temperature at 15°C and pressure at 0.7Mpa) ● Layered airflow generator "Line Blow" ... A nozzle that significantly amplifies the supplied compressed air to create a uniform slit-shaped airflow. ● Annular airflow generator "Round Blow" ... A nozzle that applies the amplification function of the supplied air to enable three functions in one: "blow," "suction," and "air transport." ● Various nozzles ... Compact nozzles convenient for "draining," "drying," and "blowing away." Each type reduces air consumption by amplifying the supplied air. ● Inline air heater ... An inline heater that achieves high efficiency and high responsiveness by directly heating the air. It features a robust stainless steel body and incorporates a honeycomb ceramic structure inside.