Challenging Decarbonization Technologies! Introduction to the Thermal Technology Research Institute [Opening on May 8]

正英製作所本社、東京支店、名古屋営業所、大阪支店、広島支店、九州支店

We have various test furnaces available, including combustion equipment for hydrogen burners, allowing for thorough testing of energy-saving and low-carbon solutions in production sites together with our customers! Please feel free to contact us through this page. ~Equipment Overview~ ◇ Aluminum Melting Holding Furnace Testing of aluminum melting using hydrogen combustion is possible on a practical basis. The furnace structure suppresses oxidation. - Melting capacity: 150 kg/h - Holding capacity: 800 kg/ch - Melting burner (116 kW), holding heater (9 kW x 2) ◇ QCO Coating Equipment (Coating Booth and Drying Furnace) Testing is possible with four heat sources, accommodating various works. - Gas infrared burner - Gas far-infrared panel - Gas hot air & jet heating - Electric infrared heater ◇ High-Temperature Test Furnace Combustion testing of gas burners using hydrogen and 13A/LPG is possible. Measurement of exhaust gas components and confirmation of flame shape inside the furnace can be conducted. - Internal furnace temperature: Max. 800℃ ■ Fuel Supply 13A (45 MJ/㎥) LPG (100 MJ/㎥) Hydrogen (12.8 MJ/㎥) ■ Test Power Supply Equipment Max. 150 kVA, 200V (Please consult us for other voltages, etc.)

Test equipment (high-temperature test furnace)

Date and time
Capital
Entry fee

Related product information

Challenging Decarbonization Technologies! Introduction to the Thermal Technology Research Institute [Latest Information for 2025!]
2nd anniversary celebration! Approximately 100 customers attended. Experience the forefront of decarbonization technology, including hydrogen combustion gas burners.

[Test Furnace and Equipment] - Aluminum melting holding furnace (Oxide suppression SMH type) - Painting drying furnace + painting booth (Quick curing oven QCO) - High-temperature test furnace - Open combustion furnace - Direct combustion deodorization device (Mobile demonstration unit) - Combustion equipment for original mixed burner - Radiant tube burner test furnace - Duct combustion burner test device ■ Fuel Supply 13A (45 MJ/㎥): 2.0 to 20 kPa supply Max. 200 ㎥ N/h LPG (100 MJ/㎥): 2.8 to 70 kPa supply Max. 50 ㎥ N/h Hydrogen (12.8 MJ/㎥): Up to 10 kPa supply ■ Test Power Supply Equipment Max. 150 kVA, 200V (Please consult for other voltages, etc.) (Temporary installation of generators with different voltages or frequencies depending on the experimental content) For inquiries regarding testing of combustion equipment and industrial furnaces or the use of demonstration units, please contact us through this page. Seihei Manufacturing Co., Ltd. Thermal Technology Research Institute (inside Horyuji Center) Tel. 0743-57-2244 Fax. 0743-57-5711 520 Kasame, Ando-cho, Ikoma-gun, Nara Prefecture, 639-1065 Japan
Introduction to the Quick Curing Oven for Coating Drying Test Equipment
Optimal heat source! Testable with four heat sources. We propose suitable heating equipment for work using gas/electric/hybrid heat sources! Thorough testing can be conducted together with our customers.

For inquiries regarding test consultations or the use of testing facilities, please contact us through this page. Shoei Manufacturing Co., Ltd. - Thermal Technology Research Institute (within Horyuji Center) - Industrial Furnace Division Tel. 0743-57-5630 Fax. 0743-57-5615 〒 639-1065 520 Kasame, Ando-cho, Ikoma-gun, Nara Prefecture
Introduction to the test of a hydrogen combustion aluminum melting holding furnace for decarbonization.
A test furnace based on actual equipment that uses a hydrogen burner for melting and an electric heater for holding. It is possible to conduct thorough tests for decarbonization in aluminum casting sites together with our customers!

～Equipment Overview～ Test Furnace: Aluminum Handheld Melting Holding Furnace (Oxide Suppression Structure) Model: SMH-150H2 Melting Capacity: 150kg/h Holding Capacity: Holding Chamber 800kg/ch *Actual effective capacity during continuous melting with a specific gravity of 2.4 Melting Temperature: 660–680℃ Control Accuracy: ±5℃ ～Heat Source Configuration～ Melting Burner: Hydrogen Combustion Burner 116kW × 1 unit Holding Heater: Immersion Type Electric Heater 9kW × 2 units Fuel Used: Hydrogen (City Gas 13A and Propane Gas are also possible.) Power Supply: Power 200V/60Hz, Control 100V
Oxide Suppression Furnace - Aluminum Melting Holding Furnace - SMH Series
Contributes to improving work efficiency in aluminum casting sites for automotive parts and others. Reduces the occurrence of oxides and significantly decreases the tedious cleaning of the holding chamber. (About once every six months to a year!)

【SMH Series】 Model / Melting Capacity / Holding Capacity SMH-100 100kg/h 500kg SMH-150 150kg/h 700kg SMH-200 200kg/h 870kg SMH-300 300kg/h 1200kg SMH-400 400kg/h 2000kg SCM-500 500kg/h 2500kg SCM-750 750kg/h 3200kg SCM-1000 1000kg/h 4000kg SCM-1200 1200kg/h 5000kg SCM-1500 1500kg/h 6000kg We also offer a decarbonization type equipped with a hydrogen gas burner. There is a test machine available at the Thermal Technology Research Institute, so please feel free to contact us.
On-site business trip test: Introduction of direct combustion deodorization equipment.
It is a movable unit that can be transported to the customer's factory, allowing for tests using actual odors. Deodorization tests for various odors, including VOCs, are possible!

Please consult us regarding odor connections. For inquiries about tests or the use of demo units, please contact us through this page. Shoei Manufacturing Co., Ltd. - Industrial Furnace Division - Thermal Technology Research Institute (within Horyuji Center) Tel. 0743-57-5630 Fax. 0743-57-5615 520 Kasame, Ando-cho, Ikoma-gun, Nara 639-1065, Japan