SHOEI MFG.CO.,LTD. Japanese Headquarters Official site

A test furnace based on actual equipment that uses a hydrogen burner for melting and an electric heater for holding. It is possible to conduct thorough tests for decarbonization in aluminum casting sites together with our customers!

～Equipment Overview～ Test Furnace: Aluminum Handheld Melting Holding Furnace (Oxide Suppression Structure) Model: SMH-150H2 Melting Capacity: 150kg/h Holding Capacity: Holding Chamber 800kg/ch *Actual effective capacity during continuous melting with a specific gravity of 2.4 Melting Temperature: 660–680℃ Control Accuracy: ±5℃ ～Heat Source Configuration～ Melting Burner: Hydrogen Combustion Burner 116kW × 1 unit Holding Heater: Immersion Type Electric Heater 9kW × 2 units Fuel Used: Hydrogen (City Gas 13A and Propane Gas are also possible.) Power Supply: Power 200V/60Hz, Control 100V

The high-temperature gas burner series now includes a hydrogen combustion specification! It can be used in various industrial furnaces due to its tile top.

【Model】(Rated combustion volume) EIS-50H2 (58kW) EIS-100H2 (116kW) EIS-200H2 (233kW) 【Ignition method】 Direct ignition 【Detection method】 Ultraviolet phototube

Contributes to improving work efficiency in aluminum casting sites for automotive parts and others. Reduces the occurrence of oxides and significantly decreases the tedious cleaning of the holding chamber. (About once every six months to a year!)

【SMH Series】 Model / Melting Capacity / Holding Capacity SMH-100 100kg/h 500kg SMH-150 150kg/h 700kg SMH-200 200kg/h 870kg SMH-300 300kg/h 1200kg SMH-400 400kg/h 2000kg SCM-500 500kg/h 2500kg SCM-750 750kg/h 3200kg SCM-1000 1000kg/h 4000kg SCM-1200 1200kg/h 5000kg SCM-1500 1500kg/h 6000kg We also offer a decarbonization type equipped with a hydrogen gas burner. There is a test machine available at the Thermal Technology Research Institute, so please feel free to contact us.

2nd anniversary celebration! Approximately 100 customers attended. Experience the forefront of decarbonization technology, including hydrogen combustion gas burners.

[Test Furnace and Equipment] - Aluminum melting holding furnace (Oxide suppression SMH type) - Painting drying furnace + painting booth (Quick curing oven QCO) - High-temperature test furnace - Open combustion furnace - Direct combustion deodorization device (Mobile demonstration unit) - Combustion equipment for original mixed burner - Radiant tube burner test furnace - Duct combustion burner test device ■ Fuel Supply 13A (45 MJ/㎥): 2.0 to 20 kPa supply Max. 200 ㎥ N/h LPG (100 MJ/㎥): 2.8 to 70 kPa supply Max. 50 ㎥ N/h Hydrogen (12.8 MJ/㎥): Up to 10 kPa supply ■ Test Power Supply Equipment Max. 150 kVA, 200V (Please consult for other voltages, etc.) (Temporary installation of generators with different voltages or frequencies depending on the experimental content) For inquiries regarding testing of combustion equipment and industrial furnaces or the use of demonstration units, please contact us through this page. Seihei Manufacturing Co., Ltd. Thermal Technology Research Institute (inside Horyuji Center) Tel. 0743-57-2244 Fax. 0743-57-5711 520 Kasame, Ando-cho, Ikoma-gun, Nara Prefecture, 639-1065 Japan