This is an introductory book on hot melt adhesives. "In Understanding Hot Melt Adhesives: An Introductory Guide Vol. 1," we introduce the characteristics of hot melt, its advantages and disadvantages, and its implementation in a wide range of fields. [Contents] - What is hot melt? - Characteristics of hot melt - Advantages/Disadvantages of hot melt - Where is it used? - Environmentally friendly hot melt adhesives Please take a look!

Reduce air consumption! Fiber (fiber-like) pattern formation spray nozzle The "WAVE nozzle" is a compact non-contact spray nozzle. It has minimal hot melt dispersion and excellent conservation properties, making it suitable for various industrial equipment. 【Features】 - Reduces air consumption compared to curtain spray application - Capable of maintaining thick linearity and strength - Easy maintenance as it can be replaced one unit (25mm width) at a time - Excellent conservation properties - Cost benefits - Reduced running costs - Reduced maintenance labor *For more details, please contact us.

This document introduces examples of the implementation of our "Spiral Coating Device." 【Features】 ■ Soft finish with a pleasant texture ■ Reduces waste/loss of hot melt adhesive ■ Uniform application weight with breathability/water permeability ■ Solvent-free/low-solvent for environmental/recycling measures ■ Unique nozzle with secondary air ■ Uniformly and beautifully coats ■ Compatible with adhesives from high viscosity to low viscosity ■ High-speed intermittent adhesion is possible 【Features of the Nozzle with Secondary Air】 ■ Pattern stability with guide air ■ Maintenance is greatly reduced as foreign substances do not adhere due to protection with clean air ■ Spiral coating of high viscosity hot melt, which was difficult with conventional methods, is now possible *For more details, please download the PDF or feel free to contact us.

Achieve stable application! Hot melt supply unit 【Features】 ■ Stable supply of melt possible ■ Linear securing of required amount ■ Reduced downtime ■ Reduced product waste ■ Contributes to environmental conservation ■ Cost benefits ■ Improved production efficiency *For more details, please download the PDF or feel free to contact us.

This is a page introducing case studies of E-coater application devices. 【Installed System】 E-coater head (coating width 310mm) Coating amount: 20g/m2 VH60WSS tank 【Features】 ■ Enables uniform coating ■ Special coater head for on-roll coating ■ Maximum coating width: 600mm ■ Ideal for laminating thin films as it does not produce lines or unevenness on the surface of the sheet after lamination of printed sheets (films) *For more details, please download the PDF or feel free to contact us.

This is a collection of case studies addressing the challenges of our coating device, the "Dispenser." We encourage you to read it at least once. *For detailed product specifications, please check the product page or feel free to contact us.*

The "Tornado" is a system that allows for the rapid transportation and heating of solid hot melt adhesives at room temperature, enabling a continuous and stable supply. 【Features】 ■ Hot melt adhesives and resins can be melted in about 1 minute. ■ High-viscosity hot melts can also be melted instantly (usable viscosity range: up to 200,000 mPa·s). ■ It has minimal thermal history, preventing gelation and carbonization of the hot melt. ■ It excels with hot melts that have a fast thermal degradation rate, such as polyamides! *For more details, please feel free to contact us.

This is a collection of case studies addressing the challenges of our coating device, the "Dispenser." We encourage you to read it at least once. *For detailed product specifications, please check the product page or feel free to contact us.*

This document introduces examples of the "Foam Melt Device" that we handle. 【Features】 ■ Incorporates nitrogen gas into hot melt, transforming it into a foam! ■ The bubbles are independent cells, resulting in low water absorption and improved impact resistance. ■ Easy adjustment of the foam expansion ratio. ■ Unique design by Suntool allows switching between foamed and non-foamed states. ■ Newly designed circulation system stabilizes the foam expansion ratio. ■ Enables surface coating in addition to beading, diversifying applications. ■ Reduces costs of the hot melt used by foaming it. ■ Compatible with adhesives ranging from high viscosity to low viscosity. ■ By inputting the desired foam expansion ratio, anyone can create foam (no complicated operations required). *For more details, please download the PDF or feel free to contact us.

Introducing Toyo Chem Co., Ltd.'s new product! This is the introduction page for PUR adhesive. Despite being PUR, it has adhesive properties, demonstrating adhesion in various environments, and allows for application using various coating patterns. - "PUR Adhesive Sheet" with adhesive properties despite being PUR - "Heat-resistant PUR-HM Adhesive" with high heat and cold resistance - "Functional Optical PUR Adhesive" usable in various temperature ranges *For more details, please refer to the related links or feel free to contact us.

This document introduces examples of the "dispenser coating device" that we handle. 【Features】 ■ Various coatings are possible with head replacement ■ Simple mechanism and maintenance-free ■ Enhanced convenience with a wide range of options ■ Available for reactive hot melt (DP300P) ■ Compatible with adhesives from high to low viscosity ■ Commonly used for bonding and filling small boxes ■ Systems can also be produced for integration with robots. *For more details, please download the PDF or feel free to contact us.

This document introduces case studies of the "Spiral Coating Device" that we handle. 【Features】 ■ Soft finish with a pleasant texture ■ Reduces waste/loss of hot melt adhesive ■ Even application weight with breathability/water permeability ■ Solvent-free/low-solvent for environmental/recycling measures ■ Unique nozzle with secondary air ■ Uniformly and beautifully coats ■ Compatible with adhesives from high viscosity to low viscosity ■ Capable of high-speed intermittent adhesion 【Features of the Nozzle with Secondary Air】 ■ Stable pattern with guide air ■ Maintenance is greatly reduced as there is no foreign matter adhesion due to protection with clean air ■ Spiral coating of high viscosity hot melt, which was difficult with conventional methods, is now possible *For more details, please download the PDF or feel free to contact us.

Achieve stable application! Hot melt supply unit The "Relay Manifold Unit" is a unit equipped with a motor and gear pump. By quickly securing the internal pressure necessary for the required amount of discharge, it reduces product waste loss and improves productivity, making it widely used in many industrial machines. 【Features】 ■ Stable supply of melt ■ Linear assurance of required amount ■ Reduced downtime ■ Reduced product waste loss ■ Contribution to environmental conservation ■ Cost benefits ■ Improved production efficiency *For more details, please download the PDF or feel free to contact us.

Utilizing the adhesive power (viscosity) of hot melt to extrude fine fibers and uniformly apply them in a non-woven fabric style! It is also possible to spray apply in a single unit over a wide area! 【Features】 ■ Capable of uniform application of a small amount of hot melt ■ Excellent application for a soft texture ■ Sharp edges at both ends of the application width ■ Minimal scattering during application ■ Hot melt can be applied in a fibrous form *For more details, please contact us.

The foam applicator contributes to new productivity! The newly designed circulation system stabilizes the foam expansion ratio! 【Features】 ■ Nitrogen gas is mixed with hot melt (adhesive) to transform it into foam! ■ The bubbles are independent cells, resulting in low water absorption and improved impact resistance. ■ Easy adjustment of the foam expansion ratio. ■ Santool's unique design allows for switching between foamed and non-foamed states. ■ The newly designed circulation system stabilizes the foam expansion ratio. ■ In addition to beads, surface coating is also possible, diversifying applications. ■ By foaming the hot melt, it can be applied with less hot melt. ■ Reduction in the cost of the hot melt (adhesive) used. ■ Compatible with adhesives ranging from high viscosity to low viscosity. ■ By inputting the desired foam expansion ratio, anyone can create foam (no complicated operations required). *For more details, please download the PDF or feel free to contact us.

This is an introductory book on hot melt adhesives. In "Understanding Hot Melt Adhesives: An Introduction Vol. 5," we introduce an overview of application patterns and examples of application patterns using various heads and nozzles. [Contents] - What is an application pattern? - Examples of application patterns using various heads and nozzles ■ Bead/Dot application ■ Spiral application ■ Curtain application ■ Coater application ■ Slit coater application ■ Design application ■ Foam application Please take a look!

This is an introductory book on hot melt adhesives. In "Understanding Hot Melt Adhesives! Introductory Book Vol. 4," we introduce the methods of melting hot melt adhesives, the types of hot melt melters, and small application devices. [Contents] - What is a hot melt melter? - Introduction to hot melt melters - Other applications Please take a look!

This is an introductory book on hot melt adhesives. In "Understanding Hot Melt Adhesives! Introductory Book Vol. 3," we introduce the types, shapes, and applications of hot melts. [Contents] - Types of hot melts - Shapes of hot melts - Main materials and applications Please take a look!

This is an introductory book on hot melt adhesives. In "Understanding Hot Melt Adhesives: An Introduction! Volume 2," we introduce hot melt applications (the four essential elements necessary for using hot melt) and the uses of hot melt in hygiene materials/general industry. [Contents] - What are hot melt applications? - Uses of hot melt in hygiene materials - Uses of hot melt in general industry Please take a look!

This is an introductory book on hot melt adhesives. In "Understanding Hot Melt Adhesives: An Introduction! Volume 1," we introduce the characteristics of hot melt, its advantages and disadvantages, and its implementation in various fields. [Contents] - What is hot melt? - Characteristics of hot melt - Advantages/Disadvantages of hot melt - Where is it used? - Environmentally friendly hot melt adhesives Please take a look!

This document introduces case studies of the "Dispenser Coating Device" handled by our company. 【Features】 ■ Various coatings are possible with head replacement ■ Simple mechanism and maintenance-free ■ Enhanced convenience with a wide range of options ■ Also available for reactive hot melt (DP300P) ■ Compatible with adhesives from high to low viscosity ■ Frequently used for bonding and filling small boxes ■ Systems that can be mounted on robots are also available. *For more details, please download the PDF or feel free to contact us.

This document introduces examples of the "Spiral Coating Device" that we handle. 【Features】 ■ Soft finish with a pleasant texture ■ Reduces waste/loss of hot melt adhesive ■ Uniform application weight with breathability/water permeability ■ Solvent-free/low-solvent for environmental/recycling measures ■ Unique nozzle with secondary air ■ Uniformly and beautifully coats ■ Compatible with adhesives from high viscosity to low viscosity ■ Capable of high-speed intermittent adhesion 【Features of the Nozzle with Secondary Air】 ■ Stable patterns with guide air ■ Maintenance is greatly reduced as there is no foreign matter adhesion due to protection with clean air ■ Spiral coating of high-viscosity hot melt, which was difficult with conventional methods, is now possible *For more details, please download the PDF or feel free to contact us.

This document introduces examples of the implementation of our "Foam Melt Device." 【Features】 ■ Mix nitrogen gas with hot melt to transform it into foam! ■ The bubbles are independent cells, resulting in low water absorption and improved impact resistance. ■ Easy adjustment of the foaming ratio. ■ Unique design by Suntool allows switching between foamed and non-foamed states. ■ Newly designed circulation system stabilizes the foaming ratio. ■ Enables surface coating in addition to beading, diversifying applications. ■ Reduces the cost of the hot melt used by foaming it. ■ Compatible with adhesives from high viscosity to low viscosity. ■ Anyone can create foam by simply inputting the desired foaming ratio (no complicated operations required). *For more details, please download the PDF or feel free to contact us.

This is an introduction page for case studies of our DP300 and DP1000. 【Installed Systems】 DP300, DP1000 (bead specification) 【Features】 ■ Supports bead and dot application ■ Various applications possible with head replacement ■ Models for reactive hot melt adhesives are also available (DP300P) ■ Compatible with high-viscosity hot melt adhesives *For more details, please download the PDF or feel free to contact us.

This is a page introducing case studies of E-coater application devices. 【Installed System】 E-coater head with a coating width of 150mm (maximum coating width of 500mm) Application amount: 100g/m2 VH10S tank 【Features】 ■ Enables uniform application ■ Special coater head for on-roll coating ■ Coating width: 30mm to 500mm ■ Ideal for bonding thin films as it does not create lines or unevenness on the sheet surface after laminating printing sheets (films) ■ VH type tank capacity: 10L to 300L *For more details, please download the PDF or feel free to contact us.

Utilizing the adhesive power (viscosity) of hot melt to extrude fine fibers and apply them uniformly in a non-woven fabric style! It is also possible to spray apply in a single unit over a wide area! 【Features】 ■ Capable of uniform application of a small amount of hot melt ■ Excellent application with a soft texture ■ Sharp edges at both ends of the application width ■ Minimal splatter during application ■ Hot melt can be applied in a fibrous form *For more details, please contact us.

【Sample Sending Available】Uniform application without seams or unevenness is possible on wide materials that are difficult to coat with traditional spray methods, and thin coatings are also possible! 【Features】 ■ Capable of uniform application of small amounts of hot melt ■ Excellent application with a soft texture ■ Sharp edges at both ends of the application width ■ Minimal splatter during application ■ Hot melt can be applied in a fibrous form *Currently, we are distributing coating samples! Please feel free to contact us for more information.

This document introduces examples of the "dispenser coating device" that we handle. 【Features】 ■ Various coatings are possible with head replacement ■ Simple mechanism and maintenance-free ■ Enhanced convenience with a wide range of options ■ Available for reactive hot melt (DP300P) ■ Compatible with adhesives from high viscosity to low viscosity ■ Commonly used for bonding and filling small boxes ■ Systems can also be manufactured for integration with robots. *For more details, please download the PDF or feel free to contact us.

This is an introduction page for case studies of our DP300P coating device. 【Installed System】 DP300P CC Coater 【Features】 ■ Compatible with high-viscosity hot melt adhesives ■ Contact-type coating head ■ Coating patterns can be set arbitrarily based on shim patterns *For more details, please download the PDF or feel free to contact us.

This is an introduction page for the case study of our curtain spray coating equipment. 【Installed System】 Complete curtain spray coating equipment *Maximum coating width of curtain nozzle: 1230mm 【Features】 ■Compatible with adhesives ranging from high viscosity to low viscosity ■Utilizes the cohesive force and viscosity of hot melt (adhesive) to discharge fine fibers, enabling uniform thin film coating *For more details, please download the PDF or feel free to contact us.