On October 20, 2025 (Monday), an article about our company's RF Division's newly developed RFID reader/writer with a liquid crystal display was published in the Sanyo Shimbun morning edition, local economy section. This new type of reader/writer features: - A liquid crystal display that allows for immediate confirmation of reading results - Contributions to improved work efficiency and error prevention in production sites - Reliable reading of IC tag information, displayed in real-time These functions make it a product that further evolves the use of RFID in manufacturing and logistics environments. For more details, please refer to the article on the Sanyo Shimbun Digital.

Thank you very much for your continued support of Takaya products. We are pleased to announce that we will be upgrading the firmware of the interface board compatible with the MQTT protocol, which is installed in our HF and UHF band RFID readers/writers. For more details, please refer to the document below.

Takaya Corporation will be exhibiting at the "27th Library Comprehensive Exhibition" to be held at Pacifico Yokohama from October 22 (Wednesday) to 24 (Friday), 2025. Founded in 1918, our company is a domestic electronics manufacturer based in Ihara City, Okayama Prefecture. Our RFID products, the "TR3 Series" and "TR3X Series," have been adopted by many municipalities across the country since their initial introduction in 2006, serving as IC devices that support the efficiency of library operations and the improvement of services. At this exhibition, we will showcase a full lineup of IC devices for libraries, covering both HF and UHF bands. We will have equipment available for hands-on operation and experience, including shelf antennas, handheld devices for inventory checks, and counter antennas. We invite you to take this opportunity to see our latest RFID solutions. We sincerely look forward to your visit.

We are pleased to announce that Takaya Corporation's initiatives will be featured as a user case at the technology event "LINX DAYS 2025," hosted by Links Corporation. "LINX DAYS" is a technology event focused on cutting-edge technologies that support the advancement and automation of the manufacturing industry, including machine vision, industrial cameras, 3D sensors, robotics, and AI. It features presentations and case studies from leading companies both domestically and internationally, providing a valuable opportunity for many engineers, developers, and executives involved in manufacturing to engage with the latest industry trends and practical solutions. This time, we will be discussing the theme "Enhancing the Value of High-Speed Flying Probe Testers through HALCON Implementation," highlighting how our flying probe testers have evolved through the use of the image processing library "HALCON" and how we have achieved further precision and speed in the inspection process. We hope this information will be beneficial for those working on quality improvement and inspection automation in manufacturing environments.

In the October 2025 issue of the monthly magazine "Inspection Technology" (Nihon Kogyo Shuppan), an article about our latest technology has been published. Published article: "Latest Trends in Flying Probe Testers Equipped with New Technology" Author: Koki Yanagida, Industrial Equipment Division, Takaya Corporation This paper discusses the technological innovations of the latest flying probe testers designed to accommodate the high-speed and high-density printed circuit boards, as well as examples of the introduction of JTAG collaboration and ZERO impact technology.

Takaya will be exhibiting at the following events! We will provide detailed information about winter internships and upcoming selection schedules, so please stop by our booth. We look forward to meeting everyone! ■ Caritas Job Hunting Forum Date: Saturday, September 27, 2025, 12:00 PM - 4:00 PM Location: Okayama Convention Center ■ Internship & Career Discovery Fair Date: Saturday, November 1, 2025, 1:00 PM - 5:00 PM Location: Convex Okayama ■ Internship & Career Discovery Fair Date: Saturday, November 15, 2025, 1:00 PM - 5:00 PM Location: Hiroshima Green Arena ■ Internship & Career Discovery Fair Date: Saturday, December 7, 2025, 1:00 PM - 5:00 PM Location: Convex Okayama ■ Pre-Job Hunting Fair Date: Tuesday, February 3, 2026, 1:00 PM - 5:00 PM Location: Convex Okayama

Our paper has been published in the "Journal of the Japan Institute of Electronics Packaging" (hereinafter referred to as "JIEP"), Vol. 28 No. 6 (September 2025). Published Paper "Development of an Ultra-High-Speed Flying Probe Tester for PCB Assembly Inspection" Author: Kouki Yanagida Paper Summary This paper reports on a new technology for the ultra-high-speed flying probe tester developed to address the challenges of high cost and difficulty in accessing fine components associated with traditional fixture-based in-circuit testing, proposing a new standard for next-generation high-density assembly board inspection.

Takaya Corporation will exhibit at the "Okayama Technology Exhibition (OTEX)" both in-person and online, which will be held in 2025. Okayama Prefecture is known as a "manufacturing prefecture," with the manufacturing industry accounting for a significantly higher percentage of the prefecture's gross production compared to the national average. OTEX is one of the largest exhibition and business negotiation events in the Chugoku and Shikoku regions, held since 2016, serving as a platform to widely showcase this technological prowess. At this exhibition, we will introduce our advanced inspection technologies and products, including flying probe testers and RFID readers/writers. We sincerely look forward to welcoming everyone to both the in-person and online exhibitions.

Takaya Corporation will exhibit at the 27th Automatic Identification Comprehensive Exhibition, showcasing the latest RFID solution, "Visible RFID." Exhibition Details: ■ RFID Work Performance Collection System No need for a control PC or dedicated software Autonomous reader compatible with HF and UHF bands Cloud transmission with just an internet connection "Visualization" of work performance on a dashboard Integration with BI tools for "visualization of location" is also possible. ■ Newly developed "Visible RFID" autonomous reader Equipped with an LCD touch panel for on-site performance verification Efficient data management with batch transmission Experience the operability through live demonstrations We will also showcase various other products. Please visit the Takaya booth to experience the latest RFID solutions! We look forward to your visit.

We are pleased to announce our participation in an overseas exhibition. Itochu Corporation and MAXIM will be exhibiting at "Productronica India 2025," which will be held in Bangalore, India, from September 17 to 19, 2025, showcasing the TAKAYA flying probe tester. ■ Event Overview Dates: September 17 (Wednesday) to 19 (Friday), 2025 　　・September 17-18: 10:00 AM to 6:00 PM 　　・September 19: 10:00 AM to 5:00 PM Venue: Bangalore International Exhibition Centre (10th Mile, Tumkur Main Road, Bengaluru 562 123, India) Booth Number: Hall 4, F11 We sincerely look forward to your visit. Please stop by!

Recently, a case study of Takaya Corporation has been published on the official website of i-PRO Co., Ltd. Our company has been addressing the challenge of developing and manufacturing a new type of flying probe tester by establishing a system to remotely understand the internal conditions of the equipment and expedite initial response. As a solution, we have introduced i-PRO's network cameras, achieving faster troubleshooting through real-time monitoring and enhancing quality control in the inspection process. In this case study, the background of the introduction, reasons for product selection, operational innovations, and the effects after implementation are presented from the perspective of the on-site personnel. Please take a look at the related link below.

As part of the "Hometown Ibara Future Creation Human Resource Development Project," we welcomed local elementary and middle school students to the special summer program "Ibara Job Exploration Tour 2025," a collaboration between the Ibara City Chamber of Commerce and the Corporate Branding Committee. We conducted a presentation that clearly and enjoyably introduced how our technology supports society, allowing the children to learn about the appeal of manufacturing and the significance of working while interacting with actual devices and products. Through this initiative, we hope to deepen our connection with the community and nurture the curiosity of the children who will carry the future. We sincerely thank everyone who participated, as well as all those involved in planning and organizing the event.

Takaya Corporation will be exhibiting at the "MES2025 35th Microelectronics Symposium," which will be held for three days from September 3 (Wednesday) to September 5 (Friday), 2025, at the Osaka University Nakanoshima Center in Osaka City, Osaka Prefecture. Takaya plans to showcase a panel related to the APT series of flying probe testers. This symposium is a valuable opportunity to gather the latest research results and industry trends regarding electronic device packaging technology. We warmly invite you to visit Takaya's booth when you attend. We look forward to welcoming you.

On July 31, 2025 (Thursday), at the Keidanren Kaikan in Tokyo, our product "APT-2600FD (Dual-Side Flying Probe Tester)" received the "Nikkankogyo Shimbun 110th Anniversary Award" at the "55th Mechanical Industry Design Award IDEA" ceremony. This year, there were 34 companies with 37 entries from across the country, and 19 entries were selected for awards. The APT-2600FD was highly regarded as a next-generation model that features a unique structure enabling simultaneous inspection of both sides, along with the industry's highest standards of inspection speed and accuracy. At the award ceremony, the judging committee commented, "The design philosophy that balances inspection efficiency and reliability is excellent," providing an opportunity for our technological and product design capabilities to be widely recognized. This award is the result of the efforts of each employee involved in product development, and it could not have been achieved without the support and cooperation of our clients and stakeholders, as well as the assistance of the judges who conducted the evaluation. We sincerely thank you. Moving forward, Takaya Corporation will continue to contribute to society through the creation of high-quality and reliable products.

Thank you very much for your continued support of Takaya products. We will be upgrading the firmware version of our UHF band RFID reader/writer. For more details, please refer to the link below.

Thank you very much for your continued support. We would like to inform you that our company is planning a summer holiday. Therefore, we sincerely apologize for the inconvenience, but we will be suspending product shipping operations on the dates listed below. We appreciate your understanding in advance. ■ Shipping Suspension Period From Saturday, August 9, 2025, to Sunday, August 17, 2025 Shipping will resume as usual from Monday, August 18, 2025. ◆ Contact Information for this Release Takaya Corporation RF Division, First Sales Department TEL: 03-5449-7045 E-Mail: rfid@takaya.co.jp

Takaya Corporation will be exhibiting at Techno Frontier 2025, the 7th "Connected Factory" Promotion Exhibition. At this exhibition, themed "Connected Factory," optimal tools and solutions tailored to the scale and equipment of factories will be gathered in one place. The latest technologies that address the challenges and expectations of manufacturing sites will be showcased. Our company will present the latest solutions for the manufacturing industry utilizing RFID technology under the theme "Creating the Future of Manufacturing DX with RFID." We will offer proposals that align with our customers' challenges, such as improving efficiency on the shop floor and enhancing traceability. Products to be exhibited: - RFID × IoT Data Service "Visualizing Worker Performance and Location with RFID" - Constant monitoring of kanban cards, actual goods tags, and important assets "No Inventory Needed! Real-Time Constant Monitoring" - Streamlining inbound and outbound operations through bulk inspection "Just Pass Through! Bulk Inbound and Outbound Inspection" - Tools for writing data to IC tags "Easily Write Barcode Information to RFID" - Record management of items taken out with just a touch "Easy Outgoing Management with RFID" - "RFID Key Management Board" that clearly indicates "In Use" We invite you to visit the Takaya booth and experience the possibilities of manufacturing DX!

We have opened an "RFID Solution Room" at our Tokyo branch. This facility is a space where companies and engineers considering the introduction of RFID technology can experience the practical applications of RFID through demonstrations of products and services. In the exhibition area, we showcase a variety of RFID readers, antennas, and tags across LF, HF, and UHF bands, as well as numerous specific application examples of business improvement and automation using RFID. For instance, you can see solutions that directly address on-site challenges, such as constant management of items using shelf antennas, collection of work performance data through cloud integration, an asset management system, and a key management board, all demonstrated with actual equipment. Additionally, we display products that support both development and operation, such as modules for RFID integration and plugins for inbound/outbound and inventory operations. Our staff will also provide careful assistance with any technical inquiries regarding RFID implementation. Visits are by prior reservation only, and anyone from any industry or sector is welcome to use the facility. We invite companies considering RFID implementation, as well as those interested in the technology, to take this opportunity to visit us.

The "APT-2600FD" is an in-circuit tester that inspects the continuity and resistance values of circuit boards with high precision. The "flying probe" test technology, which uses high-speed contact probes, was developed by Takaya as the world's first and boasts a world-class market share. This product has undergone a model change after 10 years and is equipped with numerous advanced technologies, including sophisticated control functions to prevent board damage and a high-resolution image inspection system. It achieves a balance between precision and efficiency, establishing a new standard for quality assurance. This award is a testament to our technological prowess and design excellence, serving as an encouragement for further technological innovation. We sincerely thank all those involved in the development, manufacturing, and implementation of this product, as well as the judges who provided valuable feedback and evaluations during the review process. About the "Industrial Design Award IDEA": Established in 1970 by the Nikkan Kogyo Shimbun, this award aims to promote design in Japanese industrial products. It is evaluated from multiple perspectives, including product functionality, appearance, marketability, social impact, and safety. The judging committee is composed of experts from relevant government ministries, universities, and industrial organizations, and this year marks the 55th edition of the award.

We exhibited at the "Total Solution Exhibition for Electronic Devices 2025" held recently. Thank you very much for the many visitors who attended. We were interviewed by "Circuit Board Window" about the event, so please check out the YouTube video from the link below.

Our flying probe in-circuit tester "APT-2600FD," which we exhibited at the "JPCA Show 2025," has been featured in the electronics specialized media "EE Times Japan." This product has received the Encouragement Award at the 21st JPCA Awards and garnered significant attention at the exhibition. The article provides detailed coverage of the product's features and technical advantages. Please see the related links below. Moving forward, Takaya will continue to contribute to the improvement of manufacturing quality through the development of advanced inspection technologies.

We would like to express our sincere gratitude for your continued support. Takaya Corporation will be exhibiting at the "Total Solution Exhibition for Electronic Devices 2025," which will be held at Tokyo Big Sight from June 4 (Wednesday) to June 6 (Friday), 2025. Introduction of Exhibited Products From the Industrial Equipment Division, we will showcase the new model of the Flying Probe Tester, APT-2600FD-A. The APT-2600FD-A is a groundbreaking inspection device that boasts industry-leading probing accuracy, suitable for testing high-density mounted circuit boards. With its unique control mechanism and sensing technology, it achieves reliable electrical testing in various environments. Additionally, from the RF Division/Solutions Division, we will present the latest solutions for the challenge of "Creating the Future of DX in Manufacturing with RFID." We look forward to welcoming you to our booth.

We would like to inform you about the upcoming events for graduates of the class of 2027. We will discuss the open company events and summer internships that have been taking place since May, so we encourage all participating students to visit Takaya's booth. We look forward to seeing you! ■ Internship & Career Discovery Fair for Science Students Date: June 8, 2025 (Sunday) 13:00 - 17:00 Location: Okayama Convention Center (Mamakari Forum) ■ Caritas Job Hunting Forum - Internship & Career Date: June 14, 2025 (Saturday) 12:00 - 16:00 Location: Okayama Convention Center (Mamakari Forum) ■ Okayama Takahashigawa Basin - Internship & New Graduate Joint Information Session Date: June 14, 2025 (Saturday) 14:00 - 16:00 Location: Kurashiki International Hotel, Ouka Room & Fuji Room ■ Internship & Career Discovery Fair Date: June 21, 2025 (Saturday) 13:00 - 17:00 Location: Convex Okayama ■ Internship & Career Discovery Fair Date: July 19, 2025 (Saturday) 13:00 - 17:00 Location: Convex Okayama

We participated in the "Ibara Job Experience Festival" held in Ibara City. On the day of the event, many people attended, and it was very impressive to see children engaging with, learning about, and experiencing various professions. Our booth also attracted a large number of visitors, providing us with valuable opportunities for interaction. We sincerely thank the organizers, all those involved, and everyone who attended. We will continue to value our collaboration with the local community and support the growth of the children who will lead the next generation.

On May 30, 2025 (Friday), Takaya Corporation exhibited a corporate booth at the "OPU Forum 2025" held at Okayama Prefectural University. On that day, many students, faculty members, and representatives from other companies visited us, allowing us to introduce our business and technology. It was a valuable opportunity to speak directly with many people, and we sincerely appreciate it. In the future, Takaya Corporation will continue to value collaboration with the local community and educational institutions, actively creating opportunities to meet the next generation of talent. Thank you very much to everyone who attended.

Takaya Corporation's flying probe tester has received the "Technology Award" from the Japan Institute of Electronics Packaging (hereinafter referred to as "JIEP"). This award is one of the honors given by JIEP to recognize achievements and contributions related to the development and education of packaging technology, primarily awarded for technologies that have made significant contributions to the advancement of electronics packaging technology. Awardees: Kouki Yanagida, Masahiro Yamamoto Awarded Technology: Development of a high-speed flying probe inspection machine for printed circuit board assembly We are deeply honored that our flying probe tester has received the prestigious "Technology Award." We sincerely appreciate the efforts and passion of all those involved in the development of this technology, as well as the ongoing support from our customers and partners. Takaya Corporation will continue to pursue "technologies that bring innovation to the manufacturing field" and contribute to the further development of the electronics packaging sector.

We exhibited at the "1st Kansai Nepcon Japan" held recently. Thank you very much for the many visitors who came. We were interviewed by "Circuit Board Window" about the event, so please check out the YouTube video from the link below.

Takaya Corporation has been highly recognized for its technical uniqueness and future potential in the development of a flying-type in-circuit tester equipped with new technology, receiving the Encouragement Award at the 21st JPCA Award organized by the Japan Electronics Circuit Industry Association. The JPCA Award is a system that honors outstanding products and technologies that contribute to the development of electronic circuit technology and related industries, and it is conducted for exhibitors at the exhibition "JPCA Show 2025 (Total Solutions for Electronic Devices Exhibition 2025)" organized by the association. In this award, a rigorous evaluation is conducted by a selection committee composed of experts from academia, the electronic circuit industry, and specialized magazine editors, based on criteria such as 'originality (uniqueness and originality)', 'potential for development and future prospects in the industry', 'reliability', and 'relevance to current trends'. Since its establishment in 2005, the JPCA Award has been continuously held with the aim of promoting technological innovation and industrial advancement in the field of electronic circuits, and in 2025, five outstanding technologies and products were selected for the 21st JPCA Award. Our company has received this award for the second consecutive year, following last year.

We are pleased to announce that Takaya Corporation will be exhibiting a research display booth at the "OPU Forum 2025" organized by Okayama Prefectural University. This forum is an all-university event held with the aim of deepening collaboration with the local community and businesses, based on the fundamental principle of Okayama Prefectural University, which emphasizes "creating practical knowledge that values the relationships between humans, society, and nature, and contributing to the region." On the day of the event, we will introduce our initiatives related to research and technology. For more details, please visit the official OPU Forum 2025 website: https://www.oka-pu.ac.jp/research/page-996/page-71607/. We sincerely look forward to your visit.

Thank you very much for your continued support of Takaya products. We will be upgrading the firmware version of our UHF band RFID reader/writer "UTR-SHR201." For more details, please refer to the PDF document below (related materials).