"Okayama Technology Exhibition (OTEX) 2022" - Thank you for attending the technology exhibition and business meeting to meet elite companies. | TAKAYA Corporation

"Okayama Technology Exhibition (OTEX) 2022" - Thank you for attending the technology exhibition and business meeting to meet elite companies.

TAKAYA Corporation

Thank you to everyone who visited our booth at the "Okayama Technology Exhibition (OTEX) 2022," held from November 1 (Tuesday) to November 2 (Wednesday) at Convex Okayama, a technology exhibition and business meeting where you can meet elite companies. The brochures distributed at the venue on the day can be downloaded from here. Please take a look if you are interested. 【Exhibition Details】 Industrial Equipment Division - Flying Probe Tester: APT-1340J A board inspection device capable of industry-leading ultra-high-speed in-circuit testing. RF Division - LCD-equipped HF band reader/writer Supports a variety of interfaces. - UHF band bookshelf antenna reader/writer/UHF band bookshelf antenna unit Enables location management for each shelf antenna. - Low power consumption self-sounding tag "Kenshiro" Ensures four times the strength of conventional self-sounding tags.

Date and time Tuesday, Nov 01, 2022 ～ Wednesday, Nov 02, 2022
10:00 AM ～ 05:00 PM
November 2nd until 16:30.
Capital Convex Okayama Large, Medium, and Small Exhibition Halls (675 Ouchida, Kita Ward, Okayama City)
Entry fee Free

Related product information

Detecting defects in implemented circuit boards with ultra-high-speed inspection. An evolved in-circuit tester.
Top-class industry share! Introduction of the flying probe tester.

To ensure that electronic devices function correctly, the electronic circuit board within the device must operate normally. The electronic circuit board becomes operational when electronic components are correctly mounted on the printed circuit board (PCB) and power is supplied. The process of contacting a specially designed probe to the electronic circuit board, which has electronic components mounted on it, and applying minute electrical signals for inspection is called In-Circuit Testing (ICT), and the device used for this inspection is referred to as an In-Circuit Tester. Without applying unnecessary load to the board itself, it inspects the "connection reliability between electronic components and the board," the "values of individual mounted electronic components (resistors, capacitors, etc.)," and "diode polarity," among others. It is also known as MDA (Manufacturing Defect Analyzer). Main inspection items: ● Solder shorts and opens ● Pattern disconnections ● Missing components ● Incorrect component values ● Reverse insertion of polarized components ● Lifted leads of ICs and connectors ● Operation confirmation of digital transistors, optocouplers, and Zener diodes ● Other simple function tests
Reasons why Takaya's RFID is chosen: Selecting the optimal frequency and installation type!
We are a reliable domestic and long-established RFID reader/writer manufacturer. We are one of the few manufacturers that comprehensively handles RFID reader/writers.

　
Flying Probe Tester: APT-1340J *Evaluation tests currently accepted
It is a board inspection device capable of ultra-fast in-circuit testing at a top-class level in the industry.

To ensure that electronic devices function correctly, the electronic circuit board within the device must operate normally. The electronic circuit board becomes operational when electronic components are correctly mounted on the printed circuit board (PCB) and power is supplied. The process of contacting a specialized probe to the electronic circuit board, which has electronic components mounted on it, and applying a minute electrical signal for testing is called In-Circuit Testing (ICT), and the device used for this testing is referred to as an In-Circuit Tester. This method allows for the inspection of "connection reliability between electronic components and the board," "the values of individual mounted electronic components (such as resistors and capacitors)," and "diode polarity," without imposing unnecessary loads on the board itself. It is also known as MDA (Manufacturing Defect Analyzer). Main inspection contents: ● Solder shorts and opens ● Pattern disconnections ● Missing components ● Incorrect component values ● Reverse insertion of polarized components ● Lifted leads of ICs and connectors ● Operation confirmation of digital transistors, optocouplers, and Zener diodes ● Other simple function tests
RFID reader/writer with LCD touch panel suitable for IoT edge devices
Reader/writer with touch panel that does not require a PC.

　
[New Product Information] UHF Band Bookshelf Antenna RFID Reader/Writer
We are releasing the UHF version of the HF shelf antenna, which has a sales record of over 2,000 units!

Compatible standards: ISO18000-63, GS1 EPCglobal Gen 2 Reader/writer Dimensions (mm): 167(W) × 111.5(D) × 26(H) mm *excluding protrusions Antenna Dimensions (mm): 868(W) × 286(D) × 215(H) mm *excluding cables and protrusions
Equipped with 4 alarm functions, robust self-sounding tag, Ken Shiro.
Self-Playing Tag Series Latest Work!

Model Number: IN-R-KR Size: 89mm × 59mm × 21mm Wire: 170mm (standard) Wire: 1500mm Wire: 2300mm Weight: 50g (main unit only) Battery Life: 5 years (replaceable battery) Frequency: RF method (AM method planned for release) Resolution: Dedicated handheld remote control (timed settings possible)
Wireless Product Monitoring System Wi-dimo
A groundbreaking product monitoring system unlike anything seen before.

TD-MC-S Size: 102mm(W) 102mm(D) 100mm(H) Body weight: 0.38kg Monitoring distance: Maximum 2.5m on one side Radio area: Diameter 5m TD-MC-L Size: 151mm(W) 151mm(D) 182mm(H) Body weight: 1.70kg Monitoring distance: Maximum 4.5m on one side Radio area: Diameter 9m *The monitoring distance may be reduced depending on the installation of metallic objects and other products. *Fixer is not included.