TAKAYA Corporation Official site

It is a board inspection device capable of ultra-fast in-circuit testing at a top-class level in the industry.

To ensure that electronic devices function correctly, the electronic circuit board within the device must operate normally. The electronic circuit board becomes operational when electronic components are correctly mounted on the printed circuit board (PCB) and power is supplied. The process of contacting a specialized probe to the electronic circuit board, which has electronic components mounted on it, and applying a minute electrical signal for testing is called In-Circuit Testing (ICT), and the device used for this testing is referred to as an In-Circuit Tester. This method allows for the inspection of "connection reliability between electronic components and the board," "the values of individual mounted electronic components (such as resistors and capacitors)," and "diode polarity," without imposing unnecessary loads on the board itself. It is also known as MDA (Manufacturing Defect Analyzer). Main inspection contents: ● Solder shorts and opens ● Pattern disconnections ● Missing components ● Incorrect component values ● Reverse insertion of polarized components ● Lifted leads of ICs and connectors ● Operation confirmation of digital transistors, optocouplers, and Zener diodes ● Other simple function tests

It is a board inspection device capable of ultra-fast in-circuit testing at a top-class industry level. (Supported board size for inspection: up to 985×610)

To ensure that electronic devices function correctly, the electronic circuit board within the device must operate normally. The electronic circuit board becomes operational when electronic components are correctly mounted on the printed circuit board (PCB) and power is supplied. The process of contacting a dedicated probe to the electronic circuit board, which has electronic components mounted on it, and applying minute electrical signals for testing is called In-Circuit Testing (ICT), and the device used for this testing is referred to as an In-Circuit Tester. This testing checks the "connection reliability between electronic components and the board," the "values of individual mounted electronic components (such as resistors and capacitors)," and the "polarity of diodes," all without imposing unnecessary loads on the board itself. It is also known as MDA (Manufacturing Defect Analyzer). Main inspection contents: ● Solder shorts and opens ● Pattern disconnections ● Missing components ● Incorrect component values ● Reverse insertion of polarized components ● Lifted leads of ICs and connectors ● Operation verification of digital transistors, optocouplers, and Zener diodes ● Other simple function tests

This is a flagship model that arranges probe heads on both the top and bottom, enabling simultaneous in-circuit testing of the front and back of the substrate.

To ensure that electronic devices function correctly, the electronic circuit board within the device must operate normally. The electronic circuit board becomes operational when electronic components are correctly mounted on the printed circuit board (PCB) and power is supplied. The process of contacting a dedicated probe to the electronic circuit board, which has electronic components mounted, and applying minute electrical signals for testing is called In-Circuit Testing (ICT), and the device used for this testing is referred to as an In-Circuit Tester. This method allows for the inspection of "connection reliability between electronic components and the board," "the values of individual mounted electronic components (such as resistors and capacitors)," and "diode polarity," without imposing unnecessary loads on the board itself. It is also known as MDA (Manufacturing Defect Analyzer). Main inspection items include: - Solder shorts and opens - Pattern disconnections - Missing components - Incorrect component values - Reverse insertion of polarized components - Lifted leads of ICs and connectors - Operation confirmation of digital transistors, optocouplers, and Zener diodes - Other simple function tests.

The probe head is arranged above and below, allowing for simultaneous in-circuit testing of both sides of the substrate. (Supported substrate size for inspection: up to 985×610)

To ensure that electronic devices function correctly, the electronic circuit board within the device must operate normally. The electronic circuit board becomes operational when electronic components are correctly mounted on the printed circuit board (substrate) and power is supplied. The process of contacting a specialized probe to the electronic circuit board, which has electronic components mounted on it, and applying minute electrical signals for testing is called In-Circuit Testing (ICT), and the device used for this testing is referred to as an In-Circuit Tester. This testing checks the "connection reliability between electronic components and the substrate," "the values of individual mounted electronic components (such as resistors and capacitors)," and "the polarity of diodes," without applying unnecessary load to the substrate itself. It is also known as MDA (Manufacturing Defect Analyzer). Main inspection contents: - Solder shorts and opens - Pattern disconnections - Missing components - Incorrect component values - Reverse insertion of polarized components - Lifted leads of ICs and connectors - Operation confirmation of digital transistors, optocouplers, and Zener diodes - Other simple function tests

We are releasing the UHF version of the HF shelf antenna, which has a sales record of over 2,000 units!

Compatible standards: ISO18000-63, GS1 EPCglobal Gen 2 Reader/writer Dimensions (mm): 167(W) × 111.5(D) × 26(H) mm *excluding protrusions Antenna Dimensions (mm): 868(W) × 286(D) × 215(H) mm *excluding cables and protrusions

You can easily implement inventory inspection for inbound and outbound using RFID.

For more details, please watch the YouTube video. 【Tag Reading】 - Bulk Tag Reading Function Displays a list based on the imported schedule list data. Reads IC tags with handheld or fixed readers (gates) and registers the results. *Even if there is no scheduled data, the quantity of scanned products can be displayed and registered.* - Product Exploration Function Specifies a product or EPC and graphically displays the signal strength of the corresponding tags. - Results Search Function Allows you to reference the results of the registered achievements from bulk tag reading. 【Tag Issuance】 - Label Issuance Function Imports IC tag information data and outputs IC tags from a label printer based on that data. Writing EPCs and printing labels are possible. 【Data Integration (API, CSV)】 - Scheduled Data Import Imports scheduled lists for processing categories such as inbound and outbound on a document basis. - Results Data Output Outputs the results of scanned products by processing category, such as inbound and outbound, on a document basis. - Master Data Import Imports master data for EPC and product linkage information, product information, location information, and responsible person information.

Easily achieve constant monitoring with RFID! It enables real-time understanding of the inventory status and movement of managed items.

■Features - It databases the [location status] and [movement status] necessary for constant monitoring, allowing for easy integration with user systems. - It supports various Takaya UTR series LAN types (excluding embedded) and various antennas, enabling a wide range of combinations based on customer requirements. - A setting screen for R/W and connected antennas is provided, making it easy to change settings even if the number of RFID devices increases or decreases. - It also allows for changes to the reading cycle interval and the number of readings, enabling efficient adjustments during implementation. A simple dashboard application is included. It supports connections for multiple readers and multiple antennas, displaying inventory status and movement history for each antenna on the dashboard. No development is required, allowing you to start a PoC immediately.

The existing system remains unchanged! You can easily implement inventory inspection for inbound and outbound using RFID.

【Tag Reading】 - Bulk Tag Reading Function Displays a list based on the imported schedule list data. Reads IC tags with handheld or fixed readers (gates) and registers the results. *Even if there is no scheduled data, the quantity of scanned products can be displayed and registered as results.* - Product Search Function Specifies a product or EPC and displays the signal strength of the corresponding tag in a graph. - Results Search Function Allows referencing the results registered through bulk tag reading. 【Tag Issuance】 - Label Issuance Function Imports IC tag information data and outputs IC tags from a label printer based on that data. Writing EPCs and printing labels is possible. 【Data Integration (API, CSV)】 - Scheduled Data Import Imports scheduled lists for processing categories such as inbound and outbound, on a document basis. - Results Data Output Outputs the results of scanned products by processing category, such as inbound and outbound, on a document basis. - Master Data Import Imports master data linking EPCs to product information, product details, location information, and responsible person information.

The LF band (134.2 kHz) is an RFID system based on electromagnetic induction.

Features Compliant with international standard ISO/IEC 11784 / 11785 Multi-compatible with HDX and FDX methods HDX (half-duplex communication): Texas Instruments products, Silicon Craft products FDX-B (full-duplex communication): EM products, Silicon Craft products Available in both built-in antenna stationary type and external antenna type Compatible with semiconductor SEMI standard tags for semiconductor wafer carrier applications Supports ICAR-compliant livestock IDs and pet microchips

Reader/writer with touch panel that does not require a PC.