【9/11・12｜Tokyo】Learn the key points for scaling up to medium/large aircraft! Individual consultation session with Rentaro Awatori.

シンキー

Thank you for your continued support of our products. We are pleased to announce that we will be holding an "Awatori Rentaro Individual Consultation Meeting" at our headquarters (Tokyo) Application Lab as detailed below. Our representatives will explain the features of our medium and large centrifugal and planetary mixers with a processing capacity of 300ml or more, focusing on key points for scale-up. We will also flexibly accommodate live demonstrations and Q&A sessions. ■ Introduction of product lineup and key points for scale-up ■ Product demonstrations by our engineers ■ Introduction of our demo room equipped with a wide range of analytical instruments and various devices The venue, our headquarters Application Lab (demo room), features the latest equipment, including concept machines for automating stirring and degassing, as well as new large atmospheric models. We will hold the event over two days with a total of six sessions, so please join us on a date that suits you. We look forward to your applications.

Date and time Thursday, Sep 11, 2025 ～ Friday, Sep 12, 2025
10:00 AM ～ 05:00 PM
Held in three sections... 10-12 AM / 1-3 PM / 3-5 PM
Capital Shinky Co., Ltd. Tokyo Headquarters Application Lab
Entry fee Free

Related product information

Vacuum Mixer "Awatori Rentaro ARV-5000" *Demo available now
Efficiently removes submicron bubbles even in high-viscosity materials. For production, research, and development.

【Product Specifications】 ◎ Vacuum-type rotary/revolution propeller-less mixing method ◎ Maximum load capacity: 5kg * This is the total mass when materials, containers, adapters, etc. are loaded into the cup holder. ◎ Standard container: 4L resin container * The actual stirring amount varies depending on the container, materials, and conditions, so please inquire for details. ◎ Voltage: 3-phase AC200V±10%, 50/60Hz ◎ Power consumption: Approximately 35VA (standby), maximum 4500VA (operating) ◎ Safety mechanisms: Door lock sensor, door sensor, vibration sensor, rotation sensor ◎ Transport lock mechanism: One location on each side (inside) * It will be shipped in a locked state. Please unlock it before use. ◎ Main body dimensions: H1540×W1050×D865(mm) ◎ Main body weight: Approximately 500kg * For more details, please refer to the documentation. Feel free to contact us with any inquiries.
Vacuum-type stirring and defoaming device | Awatori Rentaro ARV-931TWIN
A production-compatible machine that can vacuum process a maximum NET weight of 1.8 kg (NET 930 g × 2 units) using a double hanging method.

■Maximum load capacity / 930g x 2 *Total weight including materials, containers, adapters, etc. ■Standard containers / 750ml, 550ml plastic containers *The actual stirring amount varies depending on the container, materials, and conditions, so please inquire. ■Power supply / Voltage: 3-phase AC 200V ±10%, 50/60Hz Power consumption: approximately 120VA (standby) maximum 4400VA (operating) ■Main body dimensions / H960 × W660 × D670 (mm)
Vacuum Type Stirring and Defoaming Device | Awatori Rentaro ARV-501
Simultaneous mixing and submicron-level degassing. Processing information is reported every second, contributing to improved traceability.

■Maximum load capacity / 700g *Total weight including materials, containers, adapters, etc. ■Standard container / 550mL resin container *Actual stirring amount may vary depending on the container, materials, and conditions, so please inquire. ■Power supply / Voltage: Single-phase AC200V–240V±10% (Note), 50/60Hz Power consumption: Approximately 50VA (standby), maximum 2000VA (excluding starting) (Note: The voltage when used with the separately sold pump unit PU-501 is single-phase AC200V±10%) ■Main body dimensions / H815 × W500 × D595 (mm)
Self-rotation and revolution mixer Awatori Rentaro ARE-501
Self-rotation and revolution type mixer Awatori Neritaro Atmospheric pressure type

● Method: Rotation / Revolution Propeller-less Mixing Method ● Model: ARE-501 ● Maximum Load Capacity: 1,100g * This is the total mass when materials, containers, and adapters are loaded into the cup holder. ● Standard Container: 650ml Plastic Container * The actual stirring amount may vary depending on the container, materials, and conditions, so please inquire. ● Power Supply: Voltage: Single-phase AC100V±10%, 50/60Hz Power Consumption: Approximately 50VA (standby) Maximum 1500VA (excluding startup) ● Safety Mechanisms: Door sensor, vibration sensor, rotation sensor, stirring/defoaming clutch sensor ● Transport Lock Mechanism: One location on the back of the main unit and one location on each side (inside) * Please release before use. ● Main Unit Dimensions: H686 × W500 × D500 (mm) ● Main Unit Weight: Approximately 100kg ● Accessories 1: Instruction manual (1 copy), AC cable (including 3P adapter) (1), 2 HDPE 650mL containers, 2 550mL containers, 2 300mL containers, 1 adapter for 300mL containers, (including 1 each of 3 types of O-rings) ● Accessories 2: Phillips screwdriver, L-shaped wrench (large and small), wrench (1 each), 4 hex bolts (for moving), CD (1)
Self-rotation and revolution mixer Awatori Rentaro ARV-10kTWIN
A mass-produced machine with a maximum payload of 29 kg (14.5 kg x 2) that realizes the performance of a lab machine.

■Maximum load capacity / 14.5kg x 2 *Total weight including materials, containers, adapters, etc. ■Standard container / 10L SUS dedicated container *The actual stirring amount varies depending on the container, materials, and conditions, so please inquire. ■Power supply / Voltage: 3-phase AC 200V ±10%, 50/60Hz, 100A Power consumption: approximately 170VA (standby) maximum 30kVA (operating) ■Main body dimensions / H1250 x W1900 x D1370 (mm)
Awatori Rentaro Automation-Compatible Concept Model
Automation of the mixing and defoaming process with the combination of Awatori Rentaro and a robotic arm!

The self-rotating mixer automation-compatible concept model automates the stirring and degassing processes in manufacturing sites and similar environments. Set the container with materials in the cup holder, close the device door, start the operation, and after processing, open the door to check and set the next container... This series of manual tasks is performed by an automation system centered around a robotic arm. The automation-compatible concept model can be viewed at the Shinki demo room and exhibition venues. For more details, please contact us.