We will be exhibiting at IS MEKASYS hosted by Iwase Sangyo Co., Ltd. Date: February 18 (Thursday) 10:00 AM - 7:00 PM Location: Isesaki City Sakae General Cultural Center For details about the exhibition, please refer to the attached PDF. Exhibition Contents: - Vario Spray II (Single fluid small volume intermittent spray system) - Ultrasonic spray nozzle (Unpressurized piezo vibration type spray nozzle device) - Tubing dispenser TIC type - Blower & air knife system (Water removal/drying device) [Catalog only] - Multi-channel jet (Air nozzle) [Catalog only] We hope you will take this opportunity to stop by.

From December 26, 2015 (Saturday) to January 4, 2016 (Monday). Please note that we will only be open in the morning on December 25.

By supplying water at a pressure of 30 bar or more to this nozzle, it generates a mist with an average particle diameter of around 20 μm, making it suitable for use as a fine mist cooling nozzle. The built-in check valve helps to prevent liquid dripping. Additionally, we can provide a mist cooling system that utilizes this nozzle.

We have started selling the FL-600PP, which uses PP (polypropylene) material in the shape of the best-selling FL-600E. By using materials that comply with FDA (U.S. Food and Drug Administration) and EC regulation No. 1935/2004 (plastics (EU) 10/2011), it can now be used in more severe environments (food, beverages, semiconductors, pharmaceuticals, and medical applications). Additionally, we are also launching the very compact air nozzles FL-600M4 and FL-600M5 at the same time. These products also meet the FDA and EC regulations mentioned above. Due to their compact size, they can now be installed in areas where blowing was previously impossible. (The installation sizes are M4 male thread for FL-600M4 and M5 male thread for FL-600M5.) The impact force blown from the three holes in the center and on both sides is approximately 0.4 to 0.7N @ 0.2MPa, making it powerful. In addition to regular usage locations, it can also be used in the severe environments mentioned above. In the future, automation will progress further, and in the fields of food, beverages, pharmaceuticals, and medical applications, there will be a demand for more severe materials and further miniaturization.

We would like to inform you about our summer holiday schedule. We sincerely apologize for any inconvenience this may cause and appreciate your understanding. August 13 (Thursday) to August 16 (Sunday) Regular business will resume on August 17 (Monday).

We will revise the previously stated maximum usage temperature to the recommended heat resistance temperature. Thank you for your understanding. ≪Products with Changes and Their Recommended Heat Resistance Temperatures≫ Product Name: Recommended Heat Resistance Temperature: FL-600E 50℃ FL-600S 50℃ FL-600H 50℃ FL-600A 200℃ FL-600FK 50℃ FL-600FE 50℃ FL-600FC 50℃ FL-600FM 50℃ FL-600R 50℃ FL-600Z 90℃ FL-600B 200℃ FL-600M 50℃ FL-600RM 50℃

Dear Sir/Madam, I would like to express my congratulations on your continued prosperity. We have relocated our Tokyo Sales Office to the address below as of May 25, 2015 (Monday). Taking this opportunity, all of our employees are committed to further enhancing our services to our valued clients. We sincerely ask for your continued support and patronage. Sincerely, May 2015 Tick Corporation President and CEO, Hisashi Tanaka [New Office Address] 111-0053 3-34-10 Asakusabashi, Taito-ku, Tokyo, Donneur Asakusabashi TEL: 03-3862-3010 (as before) FAX: 03-3862-3614 (as before)

We have started selling a product, an ultrasonic particle generator, that can convert low-viscosity liquids into fine particles. There is a video in the product description, so please take a look. For any questions, please contact our staff.

Specialized equipment for researching and testing natural rubber and synthetic rubber. It is also easy to use. Used in the rubber industry and tire industry.

We have started selling accessories that enable efficient application methods in new forms, such as jigs for changing the spray angle and shape of particles applied from ultrasonic spray nozzles, expensive liquids, and tubes for applying highly corrosive liquids. If you have any inquiries about our products, please contact our sales staff.

We have started lending out tank cleaning spray nozzles manufactured by Lehner, developed for cleaning/rinsing all types of tanks from test tubes to large tanks. The selection of tank cleaning spray nozzles varies depending on the shape of the tank and the equipment inside it. Lehner's tank cleaning spray nozzles allow for low-pressure cleaning while reducing cleaning time. The uniquely shaped and compact spray nozzles, which are not available from other companies, perform cleaning/rinsing very efficiently. The following are the available rental product model numbers, but please take this opportunity to try them out! = Rental Product Model Numbers = 569.059.1Y.AL 5MI.074.1Y.AL 583slip-on 594.829.1Y.TF.07 500.186.56.AH 500.191.5E.02 500.234.G9.00 5MC.049.1Y.AF 540.909.16 591.X11.17.00 591.M11.17.00 566.879.1Y.AF 566.874.1Y.AE

We have restarted the rental of multi-channel jets that hold air nozzles in various materials, from plastic products (POM, ABS) to stainless steel products (SUS 316L). Starting with the FL-600E, which features a unique orifice cover, our plastic products are RoHS compliant as they do not use any adhesives. Our metal products come in a wide variety, including brass, zinc, aluminum, and stainless steel (SUS 316L). The shapes range from flat types to round types and pinpoint types. Additionally, we now offer compact air nozzles like the FL-600SY, which can perform blowing at a 90° angle. While taking advantage of the product's key feature of maintaining a long effective reach distance for air blowing even at low pressure, the design efficiently draws in air from around the air nozzle. We encourage you to try it again during this opportunity.

We have started lending out the improved Tear Drop type (tear-shaped) XE air knife specifically for blowers. This product blows air at high speed compared to general air knives and efficiently draws in the surrounding air to create a blowing effect. The available rental products are two types: 12" (approximately 300mm) and 24" (approximately 600mm). The blowing slot can be adjusted in width using a special tool. *The basic setting is approximately 1mm. *In addition to the air knife, we also offer rental sets with blowers. If a comprehensive assessment is required, we recommend renting as a set.

The lineup of tank cleaning nozzles from Lehira has been expanded! From spray nozzles for cleaning the interiors of small containers like PET bottles and test tubes to spray nozzles for cleaning large tanks like oil tanks, there are various products available for different applications. Starting with the HygienicWhirly, which uses detergent to create foam and apply it, we also have the low-speed rotating XaectClean and the very unique Pop-Up nozzle that extends when pressure is applied. Please take this opportunity to contact our sales staff.

Rehiler Corporation, a manufacturer of multi-channel jets, has started selling the VarioSpray II, a micro-dispensing machine controlled by an electromagnetic valve, as a new product.

Sakata Seed Corporation has started selling the watering device "Banana Nozzle," which uses spray nozzles from our partner manufacturer, Lechler GmbH of Germany. It is a watering device that is suitable for seedling production and gentle on seeds.

The patented Sonic VT (Variable Temperature) tank dryer is the fastest, safest, and most energy-efficient method for drying tanks, mixers, connecting pipes, and valves after cleaning in a CIP (Clean-in-Place) system. This "plug-and-play" design allows for immediate entry into the drying process by delivering blower heat at 160°F in a closed circuit with a pressure of 1 psi using a large volume of air. It replaces all the air inside the tank up to five times per minute to forcefully dry the interior of the tank. Without using secondary heat sources (such as gas, electricity, or steam), the VT operates more simply and safely compared to any other tank drying system.

We are pleased to announce that we will be exhibiting at the "2014 Cleaning Comprehensive Exhibition" to be held at Tokyo Big Sight from October 15 next month. The products we will showcase include blowers, air knives, and other accessories from Sonic Air Systems in the United States. We will also be demonstrating water removal, so please be sure to stop by our booth. Additionally, we will send invitations to customers who have made inquiries. We understand you are busy, but we look forward to your visit. Thank you very much.

The Sonic Corporation's patented product, the tank dryer, has been featured in an advertisement in Powder & Bulk Solids magazine. Many tank dryers are already in use, meeting all essential drying requirements of our customers!

Easily clean the dirt inside the tank with a powerful straight jet!

We have made some corrections to the catalog.

We have revamped the catalog for Sonic Corporation's blowers and air knives. It now contains more technical content than before. [Examples only] Specifications for the blowers' capacities and performance curves for the air knives are included. Please take this opportunity to contact our staff.

You can check the spraying conditions of the ultrasonic atomizer in the video.

Please watch the video of the Sonic Air Knife System.

Start of rental service for ultrasonic spray nozzle demo units.

Start of demo unit rental for blower and air knife system. Ideal for water removal and drying with energy saving, high air volume, and high-speed air.

The low-noise flat jet nozzle 'FL-600SY' has newly arrived for multi-channel jets! The noise level is reduced by approximately 60%. This air nozzle can be used not only in general industries but also in food service and medical applications. When replaced with a 4mm pipe, the noise level decreases and air consumption can be reduced by about 33%. It is a new air nozzle suitable for draining water, blowing away debris, and drying in very narrow spaces with a flat air stream. By adopting SUS-316L as the material, it has become a product that can be used in various industries. For product details and specifications, please download the catalog from the product page. Alternatively, feel free to contact us by saying, "I saw it on Ipros."

Videos of Sonic Corporation's blowers and air knives are now available for viewing via YouTube.

You can now view videos of blowers and air knives from Sonic Corporation.

In addition to the standard wide-angle spray type and the narrow type, we have started selling ultrasonic spray nozzles using air caps. For more details, please contact our staff.