Among gas cutting equipment manufacturers worldwide, Hüttenwerke Krupp Mannesmann (HKM) has chosen the Lotz gas cutting equipment (torch cutting machine) as the most valuable investment and technically superior. In 1999, the current sample cutting machine supplied by the former GeGa company will be replaced with the latest torch cutting machine. The Lotz gas cutting equipment is a manufacturer that specializes in the production and sale of gas cutting equipment spun off from the former GEGA LOTZ company. Numerous GEGA LOTZ products have been supplied within Japan, and we also handle their consumables.

Lotz has received an order for a gas cutting device (torch cutting machine) for the new bloom continuous casting machine (7 strands) from Baosteel Group Guangdong Zhongguan Iron and Steel, a Chinese steel company, through the Italian steel equipment manufacturer Danieli.

Thank you very much for your exceptional support. Due to the summer vacation, we regret to inform you that we will temporarily suspend shipping during the following period: - Summer vacation: August 8 (Saturday) to August 16 (Sunday) * We will resume normal operations and shipping on August 17 (Monday). We sincerely apologize for the inconvenience and appreciate your understanding.

The video of LOTZ CUTTING, a manufacturer of gas cutting equipment for steel, is now available on our YouTube site. LOTZ CUTTING GmbH, which was spun off from the long-established GEGA LOTZ, is a German manufacturer of gas cutting equipment for steel that incorporates cutting-edge technology. *It is also compatible with the former GEGA LOTZ. While aiming to improve quality, we are making daily efforts with the theme of cost reduction. If you have any questions regarding this product, please feel free to contact our staff.

A manufacturer that incorporates the Coanda effect with the original air nozzle! We have revamped the page for Beck Air's air amplification type air nozzle. Seeing is believing! A video (gif) is included! We also have demo units available, so please consider trying them out!!

We have newly uploaded a video on our YouTube channel featuring the Sonic blower and air knife (pouch 8 retort packs) for water drainage and drying. Specifications: Blower: Sonic 85 / 7.5 horsepower motor Air knife: 300mm x 1 unit At the request of our customers, we conducted tests with an in-house demo unit, followed by testing the actual machine at the factory. As a result, we achieved good performance and successful efficiency improvements. Due to the impact of the COVID-19 pandemic, opportunities for direct communication between people have been limited, but we are seeing an increase in cases where we conduct such demos, allowing customers to confirm before performing actual machine tests at the factory. We hope that the YouTube video will serve as a reference for your future applications and help address any current issues you may be facing.

Tick Corporation has started selling its own manufactured tubing dispensers through the online tool sales site "Monotaro" to expand sales. We also offer consumables such as hand switches and tubes. If you have any questions about the products, please feel free to contact our staff.

Each drone manufacturer, both domestically and internationally, is engaged in the production and sale of drones for pesticide spraying. Additionally, each spray nozzle manufacturer is conducting research, development, and sales of spray nozzles that match these pesticide spraying drones. Lechler's agricultural spray nozzles and accessories include not only general agricultural nozzles but also ongoing research and development of nozzles specifically for drones. This time, we are conducting a demonstration test in a vineyard located on a steep slope. We are particularly interested in the effects of combining Lechler's uniquely developed low-drift spray nozzles with drones. This research is being carried out in collaboration with research institutions and universities, not just Lechler. In addition to selling steel, environmental products, and general nozzles, Lechler also offers agricultural spray nozzles and accessories. We provide unique products domestically, including banana nozzles. If you have any issues, please feel free to contact our staff.

There are various air nozzles around the world. Among them, why are the nozzles from Lechler GmbH, a global nozzle manufacturer, so widely used? It is because they not only achieve energy savings but also contribute to reducing the noise levels generated in factories. With the know-how unique to a nozzle manufacturer, the experience gained from supplying various industries, and nearly 150 years of history, these air nozzles have been developed and improved in collaboration with customers. The best-selling FL-600E features a unique structure not found in other companies, along with a dedicated orifice cover. If you have any inquiries regarding our products or applications, please feel free to contact our staff.

Sonosys ultrasonic spray nozzle US-1 is designed with the nozzle tip of the Lechler ultrasonic atomizer left intact. The specifications remain the same, allowing for the spraying of up to 1 liter per hour of liquid. The video uses a 30° air transport type, which carries particles formed by ultrasonic vibrations and applies them. Unlike conventional two-fluid nozzles, there is no velocity in the particles, which helps to minimize waste during spraying. This makes it particularly suitable for atomizing and applying expensive liquids. Currently, we also have a demo unit available, so we appreciate your consideration of this product.

The successor to the ultrasonic atomizer manufactured by Lechler GmbH, which we previously handled, has now been launched as an ultrasonic nebulizer by Sonosys GmbH. A significant difference from before is that the oscillator is now manufactured by Sonosys, utilizing cutting-edge components. The nebulizer (atomizer) section uses an equivalent product to the old Lechler model, allowing it to be directly adapted for the applications you have been using until now. Note: Please make changes to the electronic signals and connection methods due to the change in the oscillator. As before, the liquid is atomized by the vibrations within the piezo element, and the atomized liquid is transported by air blown from the air transport device. In other words, due to the slow particle velocity similar to a two-fluid spray nozzle, this product has a very high coating efficiency. This mechanical feature is also used for spraying alcohol liquids. The attached document is an example of this, so please read it, and if you have any questions, feel free to contact our staff.

We have represented the lineup of Sonaer’s ultrasonic spray nozzles (atomizers). This includes information on the standard narrow spray type, wide spray type, and radical spray type, among others. Additionally, Sonaer has developed a spray shaper that utilizes weak air to transport particles formed in various spray shapes. This is a method of atomizing liquids using ultrasonic vibrations. In other words, since the formed particles have no velocity, it is possible to apply the liquid without waste. If you have any questions or requests regarding this product, please feel free to contact our staff.

The blowers manufactured by Sonic, which we handle, use a centrifugal method. In other words, by increasing the rotation speed of the blower, a large air volume can be obtained, and this air can be efficiently delivered to the air knife. This air volume is converted into airspeed, playing a significant role in liquid drainage and drying. The Sonic blowers typically blow warm air at around +4°C above the ambient temperature. To promote drying, Sonic has successfully developed a blower that can circulate this air and blow it as hot air, which is hotter than warm air. This is very economical as it does not require the installation of a heat source like a heater in the piping, thus avoiding excessive running costs. Sonic refers to this blower as the VT blower (patented), and it is currently used in various industries and applications. For your reference, here is one example. We would appreciate it if you could take a look when you have time and consider whether it could be used for your company's applications. If you have any questions, please feel free to contact our staff.

The Sonic Corporation's blower and air knife system is primarily used for water removal, drying, and blowing off. By switching from a compressor to a blower, it is necessary to keep annual running costs down while continuously or efficiently achieving the intended purpose. This case study is based on actual use in a certain amusement park. It serves as a truly unique example of success within new initiatives. We hope you find this information helpful for improving and enhancing your company's applications. If you have any questions, please feel free to contact our staff.

When performing simple cleaning and rinsing of small tanks or containers, we hope you will continue to use the fixed tank cleaning spray nozzle from Lehner, which offers excellent cleaning performance. However, the term "effective" is different from "efficient." The rinsing technique has other implications, so please refer to the attached PDF. To remove stubborn dirt with an effective flow rate, a high volume of liquid sprayed from the nozzle is necessary. For medium-sized tanks (approximately 1.5m to 3m), there are limitations with fixed tank cleaning nozzles. If your company reviews this entire process, you may find that this fixed spray nozzle is not cost-effective. To achieve the increasing demands for hygiene, environmental standards, and efficiency, considering a rotary spray nozzle is becoming a better choice. We encourage you to add the Lehner tank cleaning spray nozzle to your selection options during this opportunity. If you have any questions, please feel free to contact our staff.

Sonic Corporation's blowers and air knife systems are often used for water removal, liquid elimination, and drying purposes. The application we would like to introduce this time is an example from a certain construction equipment manufacturer. Considering the maintenance costs associated with contact-type painting, they were exploring methods to switch to a non-contact type. Sonic Corporation assisted with this. If you have any inquiries regarding our products, please contact our staff.

The Sonic Corporation's blower and air knife system is primarily used for water removal, liquid removal, and drying. However, it is also used for the purpose of blowing off as an application. The case we are introducing is for the steel industry. There is a specification for removing abrasives used for the purpose of stretching steel plates. The Sonic Corporation's blower and air knife system significantly contributes to this specification. If you have any questions or would like more details, please feel free to contact our staff.

We have started selling mist cooling spray nozzles from Lechler, a company that sells over 25,000 types of spray nozzles. These spray nozzles are essential for countering the extreme heat in summer and the dryness in winter. They are often used for temperature and humidity management in plant cultivation and livestock facilities. Additionally, they are utilized not only in the agricultural market but also in industrial markets (food, semiconductors, paper) for temperature and humidity control. A significant feature of the mist spray is that it allows for temperature and humidity adjustment without wetting crops, livestock, or products.

Ultrasonic spray nozzle with a dovetail spray shaper manufactured by Sonia We have posted a video using an accessory that allows for changing the spray shape. The dovetail spray shaper is an air transport fixture that is ideal for wide-angle spraying and flux coating. It can be used with all NS and WS type spray nozzles. By changing the position of the dovetail spray shaper, it is possible to switch from a fan-shaped spray pattern to an elliptical spray pattern.

We will discontinue the sale of the Lehira Corporation's tank cleaning nozzle series "AccuClean" as of the end of March 2020. With the introduction of the successor products "XactClean HP / XactClean HP+", the time has come to conclude the role of the "AccuClean" series. For specifications of the "XactClean HP / XactClean HP+", please refer to the excerpt catalog. *This catalog also includes the specifications for AccuClean. If you have any questions or need further information regarding this product, please contact our staff.

We have provided descriptions and features of each product, starting with the bestselling multi-channel jet (air nozzle) FL-600E (flat type). Additionally, by including information on FDA approval, OSHA compliance, and the availability of materials suitable for food and pharmaceuticals, we have created a product lineup that is easier for customers to choose from. Although quantities are limited, we also have demo units available. Please feel free to contact our sales staff. Thank you.

Flow spray of 2 mmlit/min or less is now possible! 【Sonaer】 Sonaer Corporation's low-flow spray nozzle It can focus on small parts without waste by creating micron and sub-micron particles. There are two types of nozzles: flat and wide spray tips. These nozzles are ideal for pinpoint spray shaping, allowing for precise particle focus and minimizing solution waste. With these nozzles, coating control becomes possible, easily adapting to applications that require thin and uniform application. This nozzle is lightweight, making it attractive for use in robotic coating systems. The nozzle is available in a lightweight black aluminum case (custom-made) or a stainless steel case with a stainless steel inner feed tube. Micro feed tubes can be used for microliter capacities and are available in stainless steel and PTFE. The nozzle can utilize a spray shaper for pinpoint spraying, giving you greater control over your coating applications.

Our company's year-end and New Year holiday dates are as follows: From December 28, 2019 (Saturday) to January 5, 2020 (Sunday) *Please note that shipments will be made until December 26, 2019 (Thursday). Thank you for your understanding.

The Sonic Corporation's blower and air knife system, which is handled by our company, has been adopted for water removal after car washing. We are using the Sonic 150 (20 horsepower) and a patented rotary air knife for the water removal process.

We received an order for the modification of two casting equipment delivered in 1987 for quality improvement. As a result, the length of the steelmaking process increased by 38 meters compared to the existing value, and the casting speed also improved dramatically.

As a result of comparative tests on LOTZ Corporation's torch cutting nozzles (continuous casting slab cutting nozzles), it was proven that the cut surface of the LOTZ nozzles is smaller than that of other manufacturers' nozzles, and there is less burr on the cut sections.

The video distribution of the Vario Spray II (a single fluid spray nozzle/valve with pulse width adjustment function) from Rehila has started. It is capable of precisely spraying very small amounts of liquid. A major feature is that there is no variation in spray angle or particle size even when the flow rate changes. Unlike two-fluid nozzles, there is no need to crush the liquid into fine particles, which helps to minimize liquid dispersion. 【Main Applications】 Food/Beverage - Alcohol spray - Humidifying baked products - Oil application - Application of low-viscosity sugar solutions Plastic Processing - Humidification - Humidifying rollers Automotive/Electrical - Insecticide spray - Coating

Thank you very much for your continued patronage. Due to our inventory and summer vacation, we regret to inform you that we will temporarily suspend shipping on the following dates: - Inventory: August 8 (Thursday) * Shipping will be available on August 9 (Friday). - Summer Vacation: August 13 (Tuesday) to August 16 (Friday) * Normal shipping will resume on August 19 (Monday). We sincerely apologize for any inconvenience this may cause and appreciate your understanding.

Due to the potential of a new process and the high cost of brass material, we will change the material of this product from brass plating (35) to 303SS (16). For details, please refer to the PDF. If you have any questions, please feel free to contact our staff.

The FL-600R (round type), which is a bestseller among Lechler's multi-channel jets (air nozzles), has finally received approval from the FDA (U.S. Food and Drug Administration). Recently, industries and applications using compressed air have begun to expand beyond just industrial associations, now including the food industry, beverage industry, and pharmaceutical industry. Particularly concerning food and beverages, the FDA approval represents a significant step amidst various regulations. In addition to the flat type of the multi-channel jet (air nozzle) series, the approval of the round type will enable more efficient air blowing. We kindly ask you to consider our products on this occasion. If you require any documentation, please feel free to contact our staff.