ティックコーポレーション 本社 Official site

What is "one stone, three birds"? It refers to an air nozzle that, while being low noise (quiet) and reducing air consumption (energy-saving), also has a strong impact force (high functionality).

It can reduce generated noise more effectively while providing impact force while suppressing air consumption and air pressure. Leading the best-selling FL-600E, compressed air is supplied from the air supply side to the nozzle opening, allowing for a powerful blow with strong impact force from that opening. Due to the air flow being laminar along with the powerful injection force, it reduces waste of air consumption and noise levels caused by turbulent injection, making it an environmentally friendly product that is gentle on people. The blow patterns are available in two types: flat and round. Additionally, due to the manufacturer's unique design, there is no air diffusion. The air nozzle FL-600E comes standard with an orifice cover (the world's first), which allows for the closing of the injection port. This helps to minimize unnecessary air blowing to unwanted areas. Approval Standards: - OSHA (Occupational Safety and Health Administration [Noise]) - FDA (U.S. Food and Drug Administration) - (EC) No. 1935/2004 (Approval for materials in contact with food and beverages) - Compliant with (EU) 10/2011 for plastics - TSCA5 compliant

World's One, Air Nozzle with Orifice Cover - An air nozzle that achieves strong impact force with laminar flow - One of the best-selling products.

Material: POM Impact Force: 2N @ 0.2MPa Noise Level: 70 db (A) @ 0.2MPa Flow Rate: 17Nm3/h @ 0.2MPa Maximum Operating Pressure: 0.6MPa Heat Resistance: 50℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single port nozzle (copper pipe and crushed): approximately 122 db (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise]) - FDA (Food and Drug Administration) - (EC) No. 1935/2004 (Approval for materials in contact with food and beverages) - Compliant with (EU) 10/2011 for plastics

Sister product of the best-selling Rehiller company's air nozzle FL-600E, offered in POM without pigments.

Material: Pure POM (without pigments) Impact Force: 2N @ 0.2MPa Noise Level: 70 dB (A) @ 0.2MPa Flow Rate: 17N?/h @ 0.2MPa Maximum Operating Pressure: 0.6MPa Heat Resistance: 50℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to semi-circular single nozzle (copper pipe and crushed): approximately 12 dB (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise]) - FDA (U.S. Food and Drug Administration) - (EC) No. 1935/2004 (Approval for materials in contact with food and beverages) - Compliant with (EU) 10/2011 plastics

Sister product of the best-selling Rehiller air nozzle FL-600E, made of PP material.

Material: PP Impact Force: 2N @ 0.2MPa Noise Level: 70 dB (A) @ 0.2MPa Flow Rate: 17Nm3/h @ 0.2MPa Maximum Operating Pressure: 0.6MPa Heat Resistance: 50℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single nozzle (copper pipe and crushed): approximately 12 dB (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise]) - FDA (U.S. Food and Drug Administration) - (EC) No. 1935/2004 (Approval for materials in contact with food and beverages) - Compliant with (EU) 10/2011 plastics

Sister product of the bestselling Rehiller air nozzle FL-600E, a type with half the spray width.

Material: POM Impact force: 0.8N @ 0.2MPa Noise level: 65 dB (A) @ 0.2MPa Flow rate: 8.5Nm3/h @ 0.2MPa Maximum operating pressure: 0.6MPa Heat resistance: 50℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single-port nozzle (copper pipe and crushed): approximately 12 dB (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise]) - FDA (U.S. Food and Drug Administration) - (EC) No. 1935/2004 (Approval for materials in contact with food and beverages) - Compliant with (EU) 10/2011 for plastics

Sister product of the best-selling Rehiller air nozzle FL-600E, offered in aluminum material.

Material: Aluminum Impact Force: 2.4N @ 0.2MPa Noise Level: 76 dB (A) @ 0.2MPa Flow Rate: 18Nm3/h @ 0.2MPa Maximum Operating Pressure: 1MPa Heat Resistance: 200℃ *Please be cautious of humidity *Refer to the catalog for mounting screws, dimensions, and spray width = Features = - Quiet operation (compared to half-moon single nozzle (copper pipe and crushed): approximately 12 dB (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise])

Sister product of the bestselling Rehiller air nozzle FL-600E, offered in stainless steel 316L.

Material: SUS 316L Impact Force: 2N @ 0.2MPa Noise Level: 70 db (A) @ 0.2MPa Flow Rate: 13Nm3/h @ 0.2MPa Maximum Operating Pressure: 1MPa Heat Resistance: 550℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single-port nozzle (copper pipe and crushed): approximately 12 db (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise]) - FDA (U.S. Food and Drug Administration) - (EC) No. 1935/2004 (Approval for materials in contact with food and beverages)

Sister product of the best-selling Rehiller air nozzle FL-600E, offered in stainless steel 316L, wide type FL-600ST.

Material: SUS 316L Impact Force: 4.2N @ 0.2MPa Noise Level: 78 db (A) @ 0.2MPa Flow Rate: 32Nm3/h @ 0.2MPa Maximum Operating Pressure: 3MPa Heat Resistance: 550℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single-port nozzle (copper pipe and crushed version)): approximately 12 db (A) reduction - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise]) - FDA (U.S. Food and Drug Administration) - (EC) No. 1935/2004 (Approval for materials in contact with food and beverages)

The noise level has decreased by about 60%! This air nozzle can be used not only in general industries but also in food service and healthcare.

【Features】 ○ Noise level reduced by approximately 60% ○ Air consumption reduced by approximately 33% ○ Material made of SUS316L ○ Recommended maximum operating temperature is 180℃ ○ Suitable for a wide range of applications including food and medical use ○ Ideal for use in high-temperature environments ○ Angle-type structure allows for use in tight spaces ● For more details, please download the catalog or contact us.

Best-selling Rehiller Company Air Nozzle Multi-Channel Jet Series Flat Type

Material: Steel/PVC Impact Force: 3.7N @ 0.2MPa Noise Level: 83.5 db (A) @ 0.2MPa Flow Rate: 27N?/h @ 0.2MPa Maximum Operating Pressure: 1MPa Heat Resistance: 50℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single nozzle (copper pipe and crushed): approximately 12 db (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approved Standards = - OSHA (Occupational Safety and Health Administration [Noise])

Best-selling Rehira air nozzle Multi-channel jet series flat type outlet two-phase type (FL-600FK sister product)

Material: Iron/PVC Impact Force: 4.3N @ 0.2MPa Noise Level: 86 dB (A) @ 0.2MPa Flow Rate: 31N?/h @ 0.2MPa Maximum Operating Pressure: 1MPa Heat Resistance: 50℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single port nozzle (copper pipe and crushed): approximately 12 dB (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise])

Best-selling Rehiller Company Air Nozzle Multi-Channel Jet Series Flat Type

Material: Brass/PVC Impact Force: 2.3N @ 0.2MPa Noise Level: 77.5 dB (A) @ 0.2MPa Flow Rate: 15N?/h @ 0.2MPa Maximum Operating Pressure: 1MPa Heat Resistance: 50℃ *For mounting screws, dimensions, and spray width, please refer to the catalog. = Features = - Quiet operation (compared to semi-circular single-port nozzle (copper pipe and crushed version)): approximately 12 dB (A) reduction - Low air consumption (up to approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise])

Best-selling Rehira air nozzle, multi-channel jet series, flat type extra large.

Material: Iron/PVC Impact Force: 11.5N @ 0.2MPa Noise Level: 91.5 db (A) @ 0.2MPa Flow Rate: 100N?/h @ 0.2MPa Maximum Operating Pressure: 1MPa Heat Resistance: 50℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to semi-circular single nozzle (copper pipe and crushed): approximately 12 db (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise])

Sister product of the bestselling Rehiller air nozzle FL-600E, round type.

Material: ABS Impact Force: 2.2N @ 0.2MPa Noise Level: 74 db (A) @ 0.2MPa Flow Rate: 16Nm3/h @ 0.2MPa Maximum Operating Pressure: 0.6MPa Heat Resistance: 50℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single nozzle (copper pipe and crushed): approximately 12 db (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise])

Best-selling Rehira air nozzle FL-600E's sister product, round type, made of zinc material.

Material: Zinc Impact Force: 2.1N @ 0.2MPa Noise Level: 79 dB (A) @ 0.2MPa Flow Rate: 18Nm3/h @ 0.2MPa Maximum Operating Pressure: 1MPa Heat Resistance: 90℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single-port nozzle (copper pipe and crushed): approximately 12 dB (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise])

Best-selling Rehiller Co. air nozzle FL-600E's sister product, round type, offered in brass.

Material: Brass Weight: 52g Total Length: 50.5mm Width: 19mm Heat Resistance: 200℃ Screw Diameter: 1/4" PF (Male)

Best-selling Rehiller air nozzle FL-600E's sister product, small round type.

Material: Brass/POM Impact Force: 1.1N @ 0.2MPa Noise Level: 77 dB (A) @ 0.2MPa Flow Rate: 9Nm3/h @ 0.2MPa Maximum Operating Pressure: 1MPa Heat Resistance: 50℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single-port nozzle (copper pipe and crushed): approximately 122 dB (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise])

Best-selling Rehiller air nozzle FL-600E's sister product, ultra-compact round type, made of stainless steel SUS316L (4mm type).

Material: SUS316L Impact Force: 0.4N @ 0.2MPa Noise Level: 63 dB (A) @ 0.2MPa Flow Rate: 2Nm3/h @ 0.2MPa Maximum Operating Pressure: 0.5MPa Heat Resistance: 550℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single port nozzle (copper pipe and crushed): approximately 122 dB (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise]) - FDA (U.S. Food and Drug Administration) - (EC) No. 1935/2004 (Approval for materials in contact with food and beverages)

Best-selling Rehiller air nozzle FL-600E's sister product, ultra-compact round type, made of stainless steel SUS316L (5mm type).

Material: SUS316L Impact Force: 0.7N @ 0.2MPa Noise Level: 70 dB (A) @ 0.2MPa Flow Rate: 4.2Nm3/h @ 0.2MPa Maximum Operating Pressure: 0.5MPa Heat Resistance: 550℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single nozzle (copper pipe and crushed version)): approximately 122 dB (A) reduction - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise]) - FDA (U.S. Food and Drug Administration) - (EC) No. 1935/2004 (Approval for materials in contact with food and beverages)

Best-selling Rehiller Company air nozzle FL-600E's sister product, super large round type.

Material: Brass/PVC Impact Force: 12.8N @ 0.2MPa Noise Level: 93 dB (A) @ 0.2MPa Flow Rate: 157N?/h @ 0.2MPa Maximum Operating Pressure: 0.6MPa Heat Resistance: 50℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single port nozzle (copper pipe and crushed version)): approximately 122 dB (A) reduction - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise])

Freely and precisely fixed to the blow area.

Total length 235mm Pipe side thread diameter 1/4" PT (male) Nozzle connection side thread diameter 1/4" PF (female)

Freely and precisely fixed to the blow area.

Total length: 195mm Pipe side thread diameter: 1/4" PT (male) Nozzle connection side thread diameter: 1/4" PF (female)

Fixed precisely at the blow area freely and effortlessly.

Total length: 120mm Pipe side thread diameter: 1/4" PT (male) Nozzle connection side thread diameter: 1/4" PF (female)

Freely and precisely fixed to the blow area.

Total length: 120mm Pipe side thread diameter: 1/4" PT (male) Nozzle connection side thread diameter: 1/4" PF (female)

Freely and easily fixed to the blow area in a pinpoint manner.

Overall length: 315mm Screw diameter: 1/4" PT (male)

Freely and precisely fixed to the blow area.

Total length 275mm Screw diameter 1/4"PT (male)

Freely and precisely fixed to the blow area.

Overall length: 200mm Screw diameter: 1/4" PT (male)

Freely and precisely fixed to the blow area.

Overall length: 200mm Screw diameter: 1/4" PT (male)

Freely and precisely fixed to the blow area.

Overall length: 315mm Screw diameter: 1/4" PT (male)

Freely and precisely fixed to the blow area.

Overall length: 275mm Screw diameter: 1/4" PT (male)

Freely and precisely fixed to the blow area.

Total length: 200mm Screw diameter: 1/4" PT (male)

Freely and precisely fixed to the blow area.

Overall length 200mm Screw diameter 1/4"PT (male)

Freely and precisely fixed to the blow area.

Total length 280mm Screw diameter 1/4"PT (male)

Freely and easily fixed to the blow area in a pinpoint manner.

Total length 240mm Screw diameter 1/4"PT (male)

Freely and precisely fixed to the blow area.

Total length: 165mm Screw diameter: 1/4" PT (male)

Freely and precisely fixed to the blow area.

Overall length: 165mm Screw diameter: 1/4" PT (male)

Freely and precisely fixed to the blow area.

Overall length 285mm Screw diameter 1/4"PT (male)

Freely and precisely fixed to the blow area.

Total length 240mm Screw diameter 1/4"PT (male)

Freely and precisely fixed to the blow area.

Total length: 170mm Screw diameter: 1/4" PT (male)

Cost reduction! A lineup of "low noise + energy-saving + high-performance" air nozzles approved by OSHA, FDA, and EC No. 1935/2004.

Many places still use open pipes for water drainage, blowing, transfer, and drying applications with compressors. By changing the blowing process to an air nozzle, noise generated can be significantly reduced, while also controlling air consumption and air pressure, allowing for the application of impact force. Leading with the best-selling FL-600E, compressed air is supplied from the air supply side to the nozzle opening, performing blowing with powerful impact force from that orifice. Due to the strong injection force and the laminar flow of air, it reduces waste of air consumption and lowers noise levels caused by turbulent injection, making it an environmentally friendly product that is gentle on people. The blow patterns are available in two types: flat and round. Additionally, thanks to the manufacturer's unique design, air diffusion is prevented. The air nozzle FL-600E comes standard with an orifice cover (the world's first), allowing the injection port to be closed. This helps to minimize unnecessary air blowing in undesired areas. Please take a look. *Lechler GmbH is a German spray nozzle manufacturer.

"Sonic" drying is Sonic! We are introducing success stories and photos. [Simplified version]

【Publication Content】 ○Success Stories →Labeling Issues →Steel Industry [Removal of Residues on Plates] →Drying of Automotive Cylinders →Propane Gas Cylinders Not Fully Dried →Removal of Residual Water After Cleaning Contact Lens Pallets ○Photos ●For more details, please contact us or refer to the catalog.

Improved air knife of the traditional Tear Drop (tear-shaped) design! Enhanced blowing efficiency!!

【Standard Specifications】 Air Supply Port: 3" (2" and 1" are also available) Slot Lengths: 51mm, 153mm, 305mm, 458mm, 508mm, 610mm, 762mm, 915mm, 1067mm, 1220mm, 1524mm, 1829mm, 2134mm, 2439mm *Custom lengths can also be provided according to your company's specifications. Material: Made of aluminum (SUS material is also available.) Operating Temperature: -40℃ to 135℃

A specialized blower for draining/drying that uses a small motor to spin at high speed and create a large airflow!

【Standard Product Specifications】 - Sonic 70 (Flow rate: 2~20 Nm3/min) - Sonic 85 (Flow rate: 2.4~24.1 Nm3/min) - Sonic 100 (Flow rate: 2.83~28.33 Nm3/min) - Sonic 150 (Flow rate: 4.25~35.4 Nm3/min) - Sonic 200 (Flow rate: 5.67~56.67 Nm3/min) - Sonic 300 (Flow rate: 8.5~70.8 Nm3/min) 【Special Blowers】 - VT blower with temperature variable device 【Accessories】 - HEPA filter - Cool Air (air cooling device) - Y Verter (air switching device) - Smart Tunnel (for beverages only) - Soundproof box - Piping and various other mounting accessories are available.

Blow away water, dust, and dirt from parts with high-speed air and dry quickly. Demo units are also available for loan!

A system that efficiently and economically performs water removal and drying after product cleaning, as well as blowing away chips and dust after product molding, by blowing out high-speed air with low noise and large air volume from an air knife. ◆Product Features◆ - Saves power consumption to a fraction of that used in similar operations with conventional compressed air (reducing CO2 emissions). - Compact and space-saving, making it ideal for installation alongside existing equipment with space limitations. ≪Sonic Rotary Air Knife (patented)≫ Even with uneven surfaces, high-speed air can reach all parts, effectively drying them. ≪Sonic Sanitary Air Knife≫ Designed for direct blowing on food, meets the 3A sanitary standards. Can be quickly disassembled for regular cleaning and sanitation. ≪Sonic XE Air Knife≫ Compatible with a wide variety of specifications in factories. Available in two types: aluminum with hard anodized coating and stainless steel.

Sonic Corporation's blower and air knife use high-speed air of up to 25.4 m/sec for water removal and drying! Energy-saving blower! Demo units available for loan!

【Lineup】 ■ Spiral Blower The blowers manufactured by Sonic utilize unique technology to create a large airflow while being energy-efficient compared to compressors and conventional blowers. The generated large airflow can be supplied continuously without pulsation. Additionally, the structure is designed for easy maintenance. ■ High-Speed XE Air Knife The Sonic High-Speed XE Air Knife nozzle, further improved from the conventional Tear Drop shape, achieves excellent work efficiency. It efficiently laminarizes the air, resulting in minimal pressure loss and uniform blowing across the entire slot. A variety of options are available for the number, position, direction of the piping installation, and nozzle length. ■ SMART TUNNEL (Enclosure Box for Air Knife) This is an enclosure box for the air knife that is not available from other companies. The SMART TUNNEL allows for easy installation of Sonic's air knife and blower. *For more details, please refer to our YouTube channel.

By rotating the air knife, even complex shapes can be optimally drained/dried!

【Standard Specifications】 Air Supply Port: 3" Slot Lengths: 153mm, 305mm, 458mm, 508mm, 610mm Material: Stainless Steel Operating Temperature: -40℃ to 120℃

Seeing is believing! Improve drying and reduce running costs by using a high-speed air knife to blow off air discharged from a high-volume blower!

A job that required a pressure of 0.4 MPa has been achieved with just 29 kPa! When comparing the airflow of a compressor and a sonic blower, 62.5 horsepower is needed to obtain an airflow of 7 m³/min with a compressor. In contrast, the sonic blower can achieve this with only 4 horsepower. The difference is significant compared to compressors and domestic blowers!