ユーシー・ジャパン Official site

If you are troubled by powder clogging or adhesion issues, this is a must-see! For powder screening processes, reduce clogging and shorten classification time! *Demo units are available for free rental.

【Ultrasonic Oscillator (DGS Model / PNS Model)】 ■Operating Frequency Range: 30kHz to 38kHz ■Maximum Output: 50W, 100W, 200W ■Power Supply: Single-phase 100V, 200V, 230V ±10% (50Hz/60Hz) multi-power supply built-in ■Weight: DGS Model 3.4kg, PNS Model 3.2kg ■Dimensions: 170mm (H) x 280mm (W) x 124mm (D) (*PNS height is 91mm) ■Ambient Temperature: 0℃ to 45℃ (Humidity below 80% at 30℃) ■Safety Standards: CE, IP65 structure 【Ultrasonic Converter (C35-SD8 / C32-HP1 Model / C35-LP1 Model)】 ■Maximum Output: 120W (C35-SD8), 120W (C32-HP1), 60W (C35-LP1) ■Material: Titanium alloy body (C35-SD8, C32-HP1), Aluminum alloy body (C35-LP1) ■Weight: 270g, 510g, 250g ■Dimensions: Φ42mm x 133mm, Φ55mm x 128mm, Φ42mm x 130mm ■Ambient Temperature: 0℃ to 45℃ ■Safety Standards: CE, IP65 structure *For more details, please refer to the PDF document or feel free to contact us.

A new type of ultrasonic sieve machine that maximally utilizes the features of Artec.

For more details, please contact us.

The latest comprehensive catalog featuring a variety of ultrasonic oscillators and welding machines.

【Featured Products (Excerpt)】 ■ Model 10H-P2 Series ■ Various Transducers ■ Semi-Automatic Heavy Wire Bonder ■ Ultrasonic Plastic Welding Machine ■ Ultrasonic Metal Joining Machine with Servo Press Control ■ Ultrasonic Metal Joining Machine ■ Ultrasonic Pouch Sealer ■ Ultrasonic Hand Unit *For more details, please refer to the catalog or feel free to contact us.

Excellent effectiveness in resolving clogging in fine powder screening environments! Nylon mesh versions are now available. Achieve up to four screens with a single oscillator!

This is an ultrasonic sieve device that can apply ultrasonic vibrations to up to four sieves with a single oscillator. It allows for simultaneous sieving of four sieves in one operation, enabling efficient experiments. Since only one oscillator is needed instead of four, it also saves on equipment costs. It can be easily attached to test sieve frames to be used as an ultrasonic sieving device. ■ Ultrasonic classification and sieving device: Prevents clogging and dramatically improves sieving capability. ■ Powder troubles! Clogging, adhesion, bridging, lifespan, and capacity issues can be resolved with ultrasound! ■ Easily attachable clamp fixtures for standard laboratory sieve frames of sizes φ75, φ100, φ150, φ200, φ300, etc., allowing ultrasonic vibrations to be transmitted to SUS mesh. ■ A new type of clamp fixture with a multi-stage design that allows vibration to be applied to a two-stage sieve frame with a single ultrasonic converter. It can apply ultrasonic vibrations to up to four sieve frames simultaneously. ■ Further capacity enhancement can be achieved by combining ultrasonic vibrations with general vibrating sieves (electromagnetic, motor-driven, air turbine, etc.).

[New Model] Approximately 1.5 times the processing capacity with the same mesh area as conventional machines! Easy to attach and detach, no tapping ball required. Three different sizes available!

For more details, please contact us.

One oscillator can simultaneously provide ultrasonic vibrations to four sieves! No clogging or bridging. *Please inquire about test or rental units.

Swiss Artech Ultrasonic Systems, part of the Crest Group specializing in comprehensive ultrasonic technology, has achieved significant advancements in the development of innovative ultrasonic oscillators and converters in the field of powder screening. Its novel design demonstrates effectiveness not only in powder screening but also in various areas such as transportation, supply, cleaning, and molding. (Patent pending)

From round and square frames to metal plates, measures against powder adhesion and clogging are possible! Achieve stable sieving even in explosion-proof and temperature-changing environments!

【Ultrasonic Powder Sifter DGS】 - DGS High-Performance Model (Variable output, with I/O, PC software included, compatible with standard sieves from φ75 to production machines up to φ1000) It can apply stable ultrasonic micro-vibrations even to fine meshes such as SUS mesh with an opening of 20μm. The dedicated PC software allows for frequency analysis of the metal frame, enabling arbitrary setting of the optimal frequency, thus achieving effective mesh sifting vibrations. 【Ultrasonic Powder Sifter PNS】 - PNS Low-Cost Model (Compatible with standard sieves from φ75 to φ300) Similar to the DGS model, it can be used as a tabletop ultrasonic sifter simply by attaching a dedicated accessory to a general-purpose JIS standard sieve frame. *Please inquire about test and loan machines.

[Low-cost model] Capable of generating ultrasonic vibrations with a mesh surface amplitude of ±1 to 10μm at ultrasonic frequencies of 33kHz to 37kHz!

The PNS model will be the successor to the old AGS model.

Supports operating frequency range of ultrasonic frequencies from 30kHz to 38kHz! Ultrasonic vibrations can be applied without being affected by the shape or natural frequency of the metal!

For more details, please contact us.

Artec's latest technology, "Variable Frequency Band" method.

For more details, please contact us.