● Front section complies with IP65 ● Ultra-thin bezel ● Supports 9V~36V DC input ● Equipped with HDMI/DisplayPort/VGA ports ● Available in multi-touch capacitive touchscreen model and single-touch resistive touchscreen model ● Compatible with various mounting options such as VESA, panel mount, and rack mount using separately sold panel brackets.

This is a 3.5-inch standard single-board computer with the following features: ● Equipped with Intel(R) Celeron(R) N3350 processor ● DDR3L 1866 MHz SODIMM x 1, up to 8 GB ● VGA / LVDS1 / LVDS2 (002 model only) ● SATA 6.0 Gb/s x 1, GPIO x 8 ● USB 3.0 x 2, USB 2.0 x 8, up to 12 ports (COM2-5-5V / 12V / RI design) ● mSATA x 1 (full size), mini card x 1 (full size), with uSIM ● Single DC 12V, AT / ATX mode

The 3.5-inch industrial CPU board is equipped with the following features: ● Intel(R) Pentium(R) N4200 / Celeron(R) N3350 processor SoC ● DDR3L 1866 MHz SODIMM x 1 slot (up to 8G) ● VGA/LVDS/LVDS2 (HDMI can be optionally supported with shared circuit with LVDS2 - MOQ applies) ● Models with 2-channel audio, SATA III x1, and eMMC are also available ● 8-bit digital I/O, USB2.0 x2, USB3.0 x2, COM x4 included ● Mini Card x 1 (full size), mSATA x 1 (half size) ● Supports 9~36V DC input

This is a 3.5-inch standard single-board computer with the following features: ● Equipped with Intel(R) 8th generation Core(TM) i7/i5/i3 processors ● DDR4 2400MHz SODIMM x 2 slots (up to 64GB) (sold separately) ● LVDS x 1, VGA x 1, HDMI x 1 ● Gigabit LAN x 2, SATA 3.0 x 1, 8-bit DIO x 1 ● USB 3.2 Gen2 x 4, USB 2.0 x 2, RS-232/422/485 x 2 ● mSATA (full size) x 1 ● M.2 2280 x 1 (B key), M.2 2230 x 1 (E key) ● DC input 9-36V

It is an accelerator for AI edge computing with the following features: ● Equipped with Kneron KL520 NPU ● Low power consumption ● Compatible with boards featuring M.2 2280 standard slot

It is an accelerator for AI edge computing with the following features: ● Equipped with Kneron KL520 NPU ● Low power consumption ● Compatible with boards featuring M.2 2242 standard slot

It is an accelerator for AI edge computing with the following features: ● Equipped with Kneron KL520 NPU ● Low power consumption ● Compatible with boards featuring mPCIe standard slots

The PICO-ITX standard CPU board has the following features: ● Equipped with 8th generation Intel(R) Core(TM) i7/i5/i3/Celeron processor SoC ● DDR4 SODIMM slot x1, up to 16GB (sold separately) ● HDMI x2 ports ● Gigabit LAN x2, USB 3.2 x2 ● USB 2.0 x2, RS-232/422/485 x2, 4-bit DIO x1 (pin header) ● SATA 6.0Gb/s x1, mSATA slot x1 (storage sold separately) ● M.2 2230 (E Key) x1 ● DC 12V

This is a Mini ITX specification industrial motherboard with the following features: ● 2 x DDR4 SODIMM slots (up to 32GB) ● Supports independent triple display: 1 x VGA or 1 x HDMI, 1 x eDP or 1 x LVDS ● 1 x Intel(R) LAN i211AT, 1 x 219LM for iAMT 12.0 ● 1 x M.2 slot (M key) ● 1 x M.2 slot (E key) ● 1 x PCIe 3.0 [x1] slot ● 12V DC input

This is a Mini ITX standard industrial motherboard with the following features: ● Supports Intel® 8th generation Core™ LGA1151 processors ● DDR4 DRAM 2666MHz (up to 32GB) ● M.2 slot (M key) x1, M.2 slot (E key) x1 ● PCIe [x4] x1 ● Slim Thin Mini ITX model ● Supports 12V DC input ● USB 3.0 x4, USB 2.0 x5

This is a Mini ITX specification industrial motherboard with the following features: ● Supports Intel® 8th/9th generation Core™/Pentium® LGA1151 socket ● Supports DDR4 DRAM 2666MHz (up to 32GB) ● M.2 slot (M key) x1 (supports SATA only), M.2 slot (E key) x1 supported ● Equipped with USB 3.1 x 4, USB 2.0 x 4 ● Includes Intel® PHY i219LM and Intel® 211AT Ethernet controller ● SATA 6.0 Gb/s x 2 ● PCIe [×16] x1 (Gen3) slot ● Compatible with ATX power supply

This is a Mini ITX specification industrial motherboard with the following features: ● Supports Intel® 8th generation Core™/Pentium® LGA1151 socket ● DDR4 DRAM 2666/2400MHz (up to 32GB) ● Equipped with Intel® PHY i219LM and Intel® i210AT Ethernet controllers ● M.2 slot (M key) x1, M.2 slot (E key) x1 support ● USB 3.1 x 4, USB 2.0 x 6 ● PCIe [×4] x1 ● 12V DC power input ● Supports Intel® NVMe M.2 SSD ● Slim Thin Mini ITX model, included IO shield is a low-profile thin IO shield type

This is a Mini ITX standard industrial motherboard with the following features: ● Supports Intel® 8th generation Core™ LGA1151 processors ● DDR4 DRAM 2666MHz, (up to 32GB) ● M.2 slot (M key) x 1, M.2 slot (E key) x 1 ● USB 3.0 ports x 4, USB 2.0 ports x 4 ● Intel LAN 211AT x 3, iAMT 12.0 x 1 for 219LM ● SATA 6.0 Gb/s x 2 ● PCI-Express [x16] (Gen3) x 1 ● ATX power supply

The EPIC specification industrial CPU board has the following features: ● 6th/7th generation Intel(R) Core(TM) i-S series processors (LGA1151 socket type) ● Non-ECC DDR4 SODIMM x 2 slots, supporting up to 32G (sold separately) ● VGA (pin header) / HDMI display ● USB3.0 x 4, USB2.0 x 2 (pin header) ● mSATA full size x 1 ● SATA 6.0 Gb/s x 2, GPIO x 8 (pin header), RS-232/422/485 x 2 (pin header), audio codec with amplifier ● 12V DC input

The EPIC specification industrial CPU board has the following features: ● 8th generation Intel(R) Core(TM) i-S series processor (LGA1151 socket type) ● Non-ECC DDR4 SODIMM x2 slots, supporting up to 32G (sold separately) ● HDMI x2 ● USB 3.1 / USB 2.0 x4 (rear), USB 2.0 x2 (pin header), COM x2 (pin header) ● mSATA x1 (full size) ● 12V DC input

The PICO-ITX standard CPU board has the following features: ● Equipped with 8th generation Intel(R) Core(TM) i7/i5/i3/Celeron processor SoC ● DDR4 SODIMM slot x1, maximum 16GB (sold separately) ● HDMI x2 ports ● Gigabit LAN x2, USB 3.2 x2 ● USB 2.0 x2, RS-232/422/485 x2, 4-bit DIO x1 (pin header) ● SATA 6.0Gb/s x1, mSATA slot x1 (storage sold separately) ● M.2 2230 (E Key) x1 ● DC 12V

This is a compact CPU board equipped with a low power consumption Core i series and has the following features: ● Intel(R) Core i7/i5/i3/Celeron processor on board ● Low power consumption ● On-board DDR4 memory (up to 16GB) ● Various expansion slots ● HDMI x1, DP x1

The AI edge PC has the following features: ● Equipped with 8th generation Intel(R) Core(TM) i7/i5/i3/Celeron processor SoC ● Onboard DDR4 (up to 16GB) ● 64GB eMMC storage ● HDMI x1, COM ports (RS-232/422/485) x2 ● 16-pin GPIO connectors x2 (1 for SMT32 + 1 for 40-pin HAT) ● DC input 12-60V ● Fanless design ● Ability to exchange various technical information and download Linux, Android OS images, and dedicated software from the community site (www.up-community.org)

■CPU Board 【CPU】Intel Atom(R) x7 E3950 (4 cores/4 threads/1.60 GHz) 【Memory】4GB onboard 【Graphics】Intel Gen9 HD (4K codec support) 【Storage】64GB eMMC onboard 【Display】HDMI×1, DP×1 【Ethernet】Gigabit LAN×2 【USB】USB3.0×3, USB3.0 OTG×1 【OS】Linux Ubuntu 18.04 + OpenVINO(TM) 【Dimensions】95mm×95mm×50mm ■Camera ■For AI CORE X, please refer to the data sheet.

The Ethernet switch has the following features: ● Compliant with railway standard EN50155 ● Ideal for railway vehicle applications ● Equipped with 8 PSE ports compliant with IEEE802.3af (up to 30W/port) ● Achieves recovery time of less than 10ms even for connections with over 250 units using O-Ring ● Can connect to other companies' ring technologies using O-Chain ● Supports MRP (Media Redundancy Protocol) function compliant with IEC 62439-2 standard ● Compatible with STP/RSTP/MSTP ● Supports PTP client ● Compatible with Modbus TCP protocol ● Enables secure network management with v1/v2c/v3 ● Supports RMON for traffic monitoring ● Compatible with VLAN and LLDP protocols ● Supports IP assignment to each device via DHCP for each port ● Equipped with relay bypass function on two gigabit ports ● Event notifications possible through Syslog, email, SNMP traps, and relay output ● Configurable via web-based interface, Telnet, and console (CLI) (Open-Vision) ● Equipped with M12 connectors ● Wall mountable

The Ethernet switch has the following features: ● Complies with railway standard EN50155 ● Ideal for railway vehicle applications ● Equipped with 16 PSE ports compliant with IEEE802.3af (up to 30W/port) ● Achieves recovery time of less than 10ms even with connections of over 250 units using O-Ring ● Compatible with other manufacturers' ring technologies via O-Chain ● Supports MRP (Media Redundancy Protocol) compliant with IEC 62439-2 standard ● Supports STP/RSTP/MSTP ● PTP client compatible ● Supports Modbus TCP protocol ● Enables secure network management with v1/v2c/v3 ● RMON support for traffic monitoring ● Supports VLAN and LLDP protocols ● DHCP support for IP assignment to each device via each port ● Equipped with relay bypass function on two gigabit ports ● Event notifications possible through Syslog, email, SNMP traps, and relay output ● Configurable via web-based interface, Telnet, and console (CLI) (Open-Vision) ● Equipped with M12 connectors ● Wall mountable

The railway-grade Gigabit PoE Ethernet switch has the following features: ● 10/100/500/1000 Base-T(X) with P.S.E. PoE ×4 ports ● PoE compliant with IEEE802.3at, supporting up to 30W per port ● Auto-negotiation and auto MDI/MDI-X support ● Store and forward transmission support ● Flow control support ● Broadcast storm protection support ● Equipped with robust M12 connectors ideal for railway and industrial use ● Wall mountable

The fanless industrial PC has the following features: ● Supports desktop socket type CPU and achieves fanless operation (CPU sold separately) ● Compatible with DDR4 ECC or non-ECC SO-DIMM, up to 64GB (sold separately) ● 4 Gigabit LAN ports (LAN includes 3 i211AT and 1 i219LM for LAN2) ● Equipped with 2 HDMI ports ● Equipped with 8 USB3.2 (Gen1) ports (C246 model) / 4 USB3.2 (Gen1) ports and 4 USB2.0 ports (H310 model) ● Equipped with 6 RS-232/422/485 ports ● DC input of 10 to 35V

The industrial embedded fanless PC has the following features: ● Capable of mounting Intel Skylake CPU for high performance and high graphics capabilities ● Can accommodate desktop-grade socket-type CPUs (sold separately) ● Supports DDR4 ECC/Non-ECC SO-DIMM (up to 32GB) (memory sold separately) ● Supports independent triple display with VGA + HDMI x 2 ● HDMI supports 4K display ● Equipped with 4 USB 3.0 and 2 USB 2.0 ports ● Equipped with 3 Intel industrial-grade Gigabit LAN ports ● Features 6 RS-232/422/485 ports selectable via BIOS ● Compact size ● Supports DC 9~36V input ● Models with 32-bit digital IO input/output are also available

This is an injector with the following features: ● Equipped with 10/100/1000Base-T(X) × 2 ports for power and data output ● Compliant with IEEE802.3at/802.3af ● Automatically protects against overvoltage input and overcurrent output ● Capable of providing a total power output of up to 90W ● Input voltage supports 50VDC to 57VDC ● Housing complies with IP-30 ● Can be mounted on DIN rails and walls

This is a Mini ITX specification industrial motherboard with the following features: ● 2 x DDR4 SODIMM slots (up to 32GB) ● Supports independent triple display (eDP x 1, LVDS x 1, VGA x 1) ● Intel(R) LAN i211AT x 1, 219LM for iAMT 12.0 x 1 ● 1 x M.2 slot (M key) ● 1 x M.2 slot (E key) ● Equipped with 1 x PCIe 3.0 [x1] slot

This is a Mini ITX specification industrial motherboard with the following features: ● Supports Intel® 8th generation Core™ LGA1151 processors ● DDR4 DRAM 2666MHz, (up to 32GB) ● M.2 slot (M key) x 1, M.2 slot (E key) x 1 ● USB 3.0 ports x 4, USB 2.0 ports x 4 ● Intel® LAN 211AT x 3, iAMT 12.0 x 1 for 219LM ● SATA 6.0 Gb/s x 2 ● PCI-Express [x16] (Gen3) x 1 ● ATX power supply

This is the comprehensive Japanese catalog of AAEON's industrial motherboard products. It features industrial motherboards in NANO ITX, Mini ITX, Micro ATX, and ATX formats.

The industrial fanless embedded PC has the following features: ● Equipped with Intel(R) Celeron(R) N3350 ● 1 slot for 204-pin dual-channel DDR3L 1866MHz SODIMM (supports up to 8GB) ● 6 ports of 10/100/1000Base-TX Ethernet (supports 2 pairs bypass) ● 1 SIM socket ● +9 – 36V DC power input (terminal block input) ● 2 ports of RS-232/422/485 with ESD protection (COOM2 supports isolation) ● Operating temperature range of -40°C to 75°C

This industrial fanless compact PC features the following: ● Equipped with Intel Pentium N4200 / Celeron N3350 processors ● Slim chassis with a thickness of 37mm ● Rich I/O options (COM x 3, HDMI, VGA, USB ports, etc.) ● Wide operating temperature range of -30℃ to 60℃ ● Equipped with 2 Gigabit Ethernet ports and 4 USB ports ● Wall mount compatible