[Free Offer] Innovative Silicone Coating for Tackiness Solutions in Products
![[Free Offer] Coating Sample! Experience Kit Here](https://image.mono.ipros.com/public/premium/image_category/c19/1260/IPROS86266474934566858653.jpeg?w=140&h=140){kind=small}
Experience the "innovative silicone coating" designed to tackle sticky, unmanageable surfaces that cannot be handled with Teflon coating!
For preventing the sticking of sticky adhesive substances, which does not work well with Teflon coatings or fluororesin coatings, the following general measures have been taken, but there are limitations. ≫ Silicone release agents These are spray-type agents that can be easily applied by on-site workers and are familiar as release agents for resin molding. → However, they lack durability in their effectiveness, requiring frequent reapplication, and when wiped off with solvents for cleaning, the release agent is also removed. ≫ Surface roughening (physically reducing contact area) By making the surface of the components uneven, it becomes less likely for things to stick. There are many examples where combining this with Teflon coatings enhances effectiveness. → However, there are concerns about the risk of defective products due to the uneven shape being transferred to the product, and the difficulty of wiping or cleaning during maintenance due to the roughness. Our company has further evolved a smooth silicone coating that is effective against sticky adhesive substances and allows for solvent cleaning, tailored to the "troubles" faced on-site. We are currently offering a "feel the effect kit" for free! The "experience kit" can be requested from the official Yoshida SKT website.
basic information
Innovative Silicone Coating MRS Coating Series With a smooth, flat surface free of irregularities, it is easy to wipe clean, and the release properties are maintained even after solvent cleaning. Additionally, it achieves various physical properties required by production sites. - Smooth surface without irregularities for easy wiping - Can be cleaned with solvents - Thin film that hardly changes the shape of the components - Heat-resistant despite being silicone-based - Can be processed into resins and rubber (low-temperature processing) The MRS coating overcomes the limitations of previous "sticky adhesive countermeasures" and "silicone coatings." ■ MRS-102 → Effectiveness is maintained even after cleaning with solvents ■ MRS-014 → Maintains shapes like thinness of a blade and other forms ■ MRS-004 → Heat resistance exceeding 200°C, comparable to fluororesin (Release even after 16 hours at 350°C) ■ MRS-200 → Can be heated to resin and rubber products at temperatures below 80°C *Product information can be downloaded as a PDF. *On the official Yoshida SKT website, a "free experience kit" is currently being offered, allowing you to feel the difference between sticking and peeling.
Delivery Time
OTHER
Model number/Brand name
MRS coating
Applications/Examples of results
【Examples of Processing Applications】 ◆ Adhesive Paper Transport Roller Prevents adhesive from sticking to the transport roll 【Can be cleaned with solvents / Smooth surface without unevenness for easy wiping】 ◆ Film Cutting Table Prevents adhesion to the placement surface 【Can be cleaned with solvents / Smooth surface without unevenness for easy wiping】 ◆ Measuring Cup Prevents adhesion (residue) of measured items 【Can be cleaned with solvents / Good drainage properties / Smooth surface without unevenness for easy wiping】 ◆ Sandwich Cutting Blade Prevents adhesion to the blade 【Can be cleaned with solvents / Thin film does not alter the sharpness of the blade】
