For applications that cannot be satisfied with fluorine or silicone! Non-stick coating.
![[Free Offer] Coating Sample! Experience Kit Here](https://image.mono.ipros.com/public/premium/image_category/c19/1260/IPROS86266474934566858653.jpeg?w=140&h=140){kind=small}
Experience excellent non-stick properties for applications that cannot be satisfied with Teflon or silicone coatings! Anti-stick coating.
To prevent adhesion of sticky substances, fluoropolymer coatings (Teflon™ coatings) and silicone coatings are commonly used, but the following challenges may arise: [Challenge 1] Even with surface treatments claiming to prevent sticking, there was not much change. [Challenge 2] It started sticking unexpectedly quickly during use. [Challenge 3] Silicone coating transfers and causes defects in the bonding process (fluoropolymer did not provide sufficient effectiveness, leading to the choice of silicone). Recently, there has been an increase in customers needing solutions for more adhesive materials, such as wanting to release molten resins that do not fully solidify to shorten processing time. "Yoshida SKT has coatings that can improve such situations." With general fluoropolymer coatings, sticky substances can adhere due to various factors. In response, treatments that create a rough surface to reduce the contact area with sticky substances are known. Our company has a unique technology to create convex surfaces using fluoropolymer and is now offering a kit to experience its effects for free! ▼ You can apply from the official Yoshida SKT website below.
basic information
◆Structure of Super TP Coating◆ Unlike the physically roughened convex surfaces of the base material, creating it with underlay materials and release agents offers various advantages. ■ The smooth convex surface makes the coating less prone to wear from friction. ■ The convex shape itself has release properties (non-stick). → The anti-adhesion effect lasts longer, reducing the frequency of reprocessing. ■ Compared to sharp and hard convex surfaces, it is less likely to damage the counterpart material. → It is less likely to transfer to materials like uncured rubber, resulting in fewer defective products. Concerns with Teflon (TM) coatings and silicone coatings: 【Concern 1】 Insufficient anti-adhesion effect 【Concern 2】 The effect wears off quickly 【Concern 3】 Silicone cannot be used ↓ -Resolution of Concerns- ・Reliable anti-adhesion with controllable convex surfaces ・Less wear from friction, leaving release agents behind and reducing reprocessing ・Effectiveness increases even with all fluorine (silicone-free) *Product information can be downloaded in PDF format. Experience the difference with our "Free Experience Kit" Apply for the experience kit on the Yoshida SKT official website!
Price information
It varies depending on the specifications. Please feel free to contact us.
Delivery Time
OTHER
It varies depending on the specifications. Please feel free to contact us.
Applications/Examples of results
Examples of Equipment Improvement 【Example 1】 By using tape and labels on the rollers and chuck parts of the line transport section, maintenance efficiency has been improved. 【Example 2】 In lines using hot melt adhesives, product adhesion has been prevented. Coating Features - Super TP Coating A random convex surface composed entirely of fluororesin. - Super Alloy Coating A random round convex surface composed of alloys with a hardness of Hv600 or higher. - Super CTT Coating A random round convex surface composed of silicone rubber. With Yoshida SKT's coatings, issues caused by stickiness, such as those with vacuum plates and chuck claws for label transport, can be reduced.
