米倉製作所 Official site

Automatic and easy measurement of crystallization rate of resin materials / Polymer crystallization by temperature jump / Visualization with images and graphs / Compact design

【Specifications】 ■ Product Name Crystal Acceleration Measurement Device ■ Air Bath Heating Temperature: Maximum 400℃ Heating Method: Heater Type Sample Holder: Spring-type, Microscope Cover Glass (18mm×18mm) Holder Fixing: Automatic Disconnection Type with Guide Rail Material Holder: 20×20mm Ceramic Plate ■ Oil Bath Specifications: SUS-made with φ30mm Detection Window, Motor Stirrer Included Heating Temperature: Maximum 200℃ ■ Polarizing Microscope One for Measurement, One for Reference Transmitted Illumination: White LED Fiber Type Objective Lens: f=160mm 4X WD=18mm Polarizer: Analyzer/Rotating Polarizer with Extinction Ratio 1:10000 Light Receiving Element: Monochrome Area Sensor Resolution: 744×480 pixels Brightness Resolution: 1024 * Specifications are subject to change without notice.

"YONEKURA: Supporting Curiosity and Creativity" - Yonekura Manufacturing Co., Ltd. responds to all challenges with a "comprehensive production system" from development to manufacturing and support.

YONEKURA is a specialized manufacturer of testing machines that supports curiosity and imagination. Since its establishment in 1980, we have pursued technology as a specialized manufacturer focused on testing machines. To provide optimal products and services, we have manufactured products that cater to our customers' detailed requests. At Yonekura Seisakusho, we are committed to creating products that contribute to quality improvement, safety, and technological advancement for the future of our customers and society. We provide products through a "consistent production system" that encompasses all aspects of development, manufacturing, and support, backed by technical expertise and trust. For more details, please contact us or refer to our catalog.

Friction, Wear, Lubrication: Solving Tribology Challenges! Compliance with Standard Tests / Reproduction of Operating Environments / Performance Quality Evaluation

■ Tribology Testing Machines for Material Evaluation - Thrust Friction and Wear Testing Machine - Block-on-Ring Testing Machine - Reciprocating Sliding Testing Machine ■ Tribology Testing Machines for Product Evaluation - Bearing Friction and Wear Durability Testing Machine - Fretting Wear Testing Machine - Refrigerant Atmosphere Friction and Wear Testing Machine - Vacuum and Atmosphere Controlled Friction and Wear Testing Machine ■ Tribology Testing Machines for Lubricating Oil Evaluation - Four-Ball Testing Machine - Timken Testing Machine - Block-on-Ring Testing Machine (LFW-1) *Additionally, we can accommodate special specifications upon request, so please contact us.*

Rapid heating at approximately 50°C/sec using focused light heating method, with the possibility of rapid cooling when the heating lamp is turned off. Compatible with various atmospheres.

【Other Features】 ○ The emitted infrared radiation light is efficiently reflected and concentrated, further enhancing high heating capability. ○ With a low heat capacity heating lamp and a cooled high-reflectivity mirror, the furnace's heat capacity is minimal, allowing for rapid heating and cooling. ○ Due to its vacuum airtight structure (patent pending), direct radiation heating is possible, enabling clean and rapid heating and cooling. ○ High-temperature microscopic observation can be easily performed. 【Product Lineup】 ○ IR-HP (6 Parabolic Surface Radiation) → Rapid heating and cooling from six directions significantly expands the temperature distribution area compared to conventional heating furnaces. ○ IR-QP (4 Elliptical Shared Concentration) → Rapid heating and cooling from four directions doubles the temperature distribution area and rapid heating compared to conventional heating furnaces. ○ IR-TP (2 Elliptical Shared) → Rapid heating and cooling from two directions enables microscopic observation compared to conventional heating furnaces. ● For more details, please contact us or refer to the catalog.

"Heating and Cooling Observation Device MHO-300-2" Just place it on your microscope! Compact and slim / Atmosphere control available.

【Specifications】 ■ Product Name Heating and Cooling Observation Device MHO-300-2 Temperature Control: RT+20℃ to 300℃ Cooling Mechanism: -100 to 200℃ Heating/Cooling Rate: 100℃/min Heating Control Accuracy: Within ±1℃ Heating Area: 20×20 mm ■ External Dimensions and Utility External Dimensions: 85mm×155mm×30mm (excluding protrusions) Holder: 75mm×25mm (specimen size) Rated Power Supply: AC100V-5A ■ Options - Gas inlet, sample current port, rotary pump for vacuum - Water circulation device (for heating/cooling the stage outer wall) - Programmable temperature software, temperature display video recording software 【Target Materials】 This device can be used for material research in chemistry, polymers, and semiconductors, as well as in fundamental research fields in biology and medicine, to visualize thermodynamic phenomena under a microscope.