Experience experiments under a maximum temperature of 1800℃ and atmospheric control environment [High-Temperature Request Measurement].
Using the IR series high-temperature observation furnace for demonstrations: <<Heating/Atmosphere Control/Oxidation Experiments>> Metals/Solders/Ceramics/Solder/Glass, etc.
▼Key Points▼ 1. Insights for investigating and clarifying the causes of issues during the heating process can be obtained. 2. Useful for analyzing the mechanisms of material reactions and behaviors at high temperatures. 3. Changes under various temperature control conditions, such as rapid heating and rapid cooling, can be confirmed. ▮What is the IR Series? It is a furnace that can heat by efficiently concentrating infrared rays emitted from a near-infrared lamp, which are reflected by the gold plating on the furnace walls, onto the heating area in the center of the furnace. (For details, please refer to the IR Image Furnace feature page.) ▮Examples of Test Subjects Metals / Filler materials / Ceramics / Solder / Glass, etc. ▮Examples of Conducted Tests Heating / Atmosphere manipulation / Oxidation experiments, etc. ▮Examples of Utilization High-temperature heat treatment / Video confirmation of behaviors during firing (microscopic level) For research and development, troubleshooting, and yield improvement. *Tests involving heating only are also accepted. The experimental temperature may vary depending on the thermal capacity of the test specimen.* *There may be variations depending on sample size and test conditions.* Other experimental examples are also available on the official YouTube channel!
basic information
This measurement allows you to experience high-temperature observation using the demo unit of our IR series that we sell. The furnace of the IR series has a sealed structure, allowing it to operate in an environment where atmosphere manipulation is performed. In the case of the IR-18SP, it can reach a maximum temperature of 1700°C. You can check videos of actual experiments and test programs to capture changes in the test subjects in real-time. Please note that since the equipment used is a demo unit, we may not be able to accommodate all requests, so please contact us for details. The thermal capacity of the test specimen may cause fluctuations. ▮ Equipment Specifications Heating Temperature: MAX 1700°C Heating Rate: 50°C/sec Temperature Accuracy: Within ±1°C Atmosphere: In air, in vacuum, gas flow Sample Size: Please consult us Observation Magnification: Macro to approximately 1000x ▮ High-Temperature Observation Examples Metals: Melting/Phase transition/Powder metallurgy processes Filler materials: Melting behavior Ceramics: Sintering/Micro-crack generation Solder: Melting/Wettability Glass: Melting/Recrystallization
Price range
Delivery Time
Model number/Brand name
IR Series
Applications/Examples of results
Various manufacturers, universities, research institutes, etc.
Related Videos
catalog（12）
Download All Catalogs
News about this product（6）
-
Experience high-temperature measurements up to 1800℃ and experiments under controlled atmospheric conditions! We invite you to try high-temperature observations using the demo unit of the IR series, which represents Yonezawa Manufacturing, featuring heating, atmospheric control, and oxidation experiments.
- Metals / Filler materials / Ceramics / Solder / Glass, etc. - This measurement allows you to experience high-temperature observation using a demonstration unit of the "IR Series" concentrated heating furnace, which represents the test equipment manufacturer, Yokokura Seisakusho. Due to its sealed structure, the IR Series furnace can achieve a maximum temperature of 1800°C under an atmosphere-controlled environment, as in the case of the IR-18SP. You can capture real-time changes in the test subject by checking videos of actual experiments and the test program. *Please note that the equipment used is a demonstration unit, and we may not be able to accommodate requests depending on the circumstances, so please contact us for details. *There may be variations depending on the thermal capacity of the test specimen. ▼ Features of the IR Series ▼ The rapid heating performance and superior temperature control, along with information from the observation port, significantly shorten heating experiment times and facilitate the screening of optimal heating conditions, contributing to improved efficiency in material development tasks.
-
Experience high-temperature measurements up to 1700°C and experiments under controlled atmospheric conditions! We invite you to try high-temperature observations using the demo unit from the IR series, which represents Yonezawa Seisakusho, including heating, atmospheric control, and oxidation experiments.
- Metals / Filler materials / Ceramics / Solder / Glass, etc. - This measurement allows you to experience high-temperature observation using a demonstration unit of the "IR Series" concentrated heating furnace, which represents the test equipment manufacturer Yokokura Seisakusho. Due to its sealed structure, the IR Series furnace can achieve a maximum temperature of 1700°C under controlled atmospheric conditions, as in the case of the IR-18SP. You can capture real-time changes in the test subject by checking videos of actual experiments and the test program. *Please note that the equipment used is a demonstration unit, and we may not be able to accommodate requests depending on the circumstances, so please contact us for details. *There may be variations depending on the thermal capacity of the test specimen. ▼Features of the IR Series▼ The rapid heating performance and superior temperature control, along with information from the observation port, significantly shorten heating experiment times and facilitate the screening of optimal heating conditions, thereby contributing to improved efficiency in material development tasks.
-
Experience high-temperature measurements up to 1700℃ and experiments under controlled atmospheric conditions! We invite you to try high-temperature observations using the demo unit from the IR series, which represents Yonezawa Manufacturing, including heating, atmospheric control, and oxidation experiments.
- Metal / Filler Material / Ceramic / Solder / Glass, etc. - This measurement allows you to experience high-temperature observation using a demonstration unit of the "IR Series" concentrated heating furnace, which represents the test equipment manufacturer Yokokura Seisakusho. Due to its sealed structure, the IR Series furnace can achieve a maximum temperature of 1700°C under controlled atmospheric conditions, as in the case of the IR-18SP. You can capture real-time changes in the test subject by checking videos of actual experiments and the test program. *Please note that the equipment used is a demonstration unit, and we may not be able to accommodate requests depending on the circumstances, so please contact us for details. *There may be variations depending on the thermal capacity of the test specimen. ▼ Features of the IR Series ▼ The rapid heating performance and superior temperature control, along with information from the observation port, significantly shorten heating experiment times and facilitate the screening of optimal heating conditions, contributing to improved efficiency in material development tasks.
-
Experience high-temperature measurements up to 1700℃ and experiments under controlled atmospheric conditions! We invite you to try high-temperature observations using the demo unit of the IR series, which represents Yonezawa Manufacturing, including heating, atmospheric control, and oxidation experiments.
- Metals / Filler materials / Ceramics / Solder / Glass, etc. - This measurement allows you to experience high-temperature observation using a demonstration unit of the "IR Series" concentrated heating furnace, which represents the test equipment manufacturer, Yokokura Seisakusho. Due to its sealed structure, the IR Series furnace can achieve a maximum temperature of 1700°C under controlled atmospheric conditions, as in the case of the IR-18SP. You can capture real-time changes in the test subject by checking videos of actual experiments and the test program. *Please note that the equipment used is a demonstration unit, and we may not be able to accommodate requests depending on the circumstances, so please contact us for details. *There may be variations depending on the thermal capacity of the test specimen. ▼Features of the IR Series▼ The rapid heating performance and superiority in temperature control, along with information from the observation port, significantly shorten heating experiment times and facilitate the screening of optimal heating conditions, contributing to improved efficiency in material development tasks.
-
Experience high-temperature measurements up to 1700℃ and experiments under controlled atmospheric conditions! We invite you to try high-temperature observations using the demo unit of the IR series, which represents Yonezawa Seisakusho, including heating, atmospheric control, and oxidation experiments.
- Metals / Filler materials / Ceramics / Solder / Glass, etc. - This measurement allows you to experience high-temperature observation using a demonstration unit of the "IR Series," a focal heating furnace representative of the manufacturer, Yokokura Seisakusho. Due to its sealed structure, the IR Series furnace can achieve a maximum temperature of 1700°C under controlled atmospheric conditions, as in the case of the IR-18SP. You can capture real-time changes in the test subject by checking videos of actual experiments and the test program. *Please note that the equipment used is a demonstration unit, and we may not be able to accommodate requests depending on the circumstances, so please contact us for details. *There may be fluctuations depending on the heat capacity of the test specimen. ▼ Features of the IR Series ▼ The rapid heating performance and superior temperature control, along with information from the observation port, significantly shorten heating experiment times and facilitate the screening of optimal heating conditions, contributing to improved efficiency in material development tasks.
