AQUASYSTEM head office・Sugoshi Factory・Overseas Subsidiary（CHINA・THAILAND・VIETNAM） Official site

For the transfer of low-viscosity oils such as kerosene, light oil, and biodiesel.

<Specifications> Liquid to be used: Oil, kerosene, light oil (For details, please refer to the catalog) Usable viscosity: 500cP (varies by nozzle) Maximum discharge rate: 30ℓ/min (at viscosity 1cP, lift height 0m) Power supply: 100V Lift height: 10m (clean water)

[For oil, kerosene, light oil, and biodiesel / for drums] Electric handheld pump for transferring low-viscosity oils such as kerosene, light oil, and biodiesel!

【Specifications (Excerpt)】 ●Type: 200L Closed Drum (JIS Standard: Large Plug G2 / Small Plug G3/4) ●Liquid Used: Oil, Kerosene, Diesel ●Usable Viscosity (cP): 500 ●Power Supply (V): 100 ●Current (A): 0.9 ●Rated (minutes): Continuous operation possible ●Discharge Pressure (Mpa): 0.1 ●Maximum Discharge Amount (1cP / L/min): 30 ●Maximum Lift Height (m): 10 ●Suction Lift Height (m): 5 ●Weight (kg): [EMHD-20FC] 11.8 [EMHD-20SUS] 13.6 *For more details, please refer to the PDF document or feel free to contact us.

For transferring low-viscosity oils such as kerosene, light oil, and biodiesel! Electric handheld pump.

【Specifications (Excerpt)】 ●Type: Pump only ●Liquid used: Oil, kerosene, light oil, biodiesel ●Usable viscosity (cP): 500 ●Power supply (V): 100 ●Current (A): 0.9 ●Rated (minutes): Continuous operation possible ●Discharge pressure (Mpa): 0.1 ●Maximum discharge volume (1cP/L/min): 30 ●Maximum lift height (m): 10 ●Suction lift height (m): 5 ●Weight (kg): [EMH-20FC] 7.0 [EMH-20SUS] 8.8 [EMHH-20FC] 11.8 *For more details, please refer to the PDF document or feel free to contact us.

Radial piston vane pump, suitable for use in explosion-proof areas and easy to carry! For transferring liquids from tanks or drums such as kerosene and diesel.

【Specifications (Excerpt)】 <AMH1-20FC> ●Motor Drive Method: Radial Piston Motor ●Pump Type: Vane Pump ●Style: Pump Unit ●Fluid Used: Oil, Kerosene, Diesel, Biodiesel ●Usable Viscosity (cP): 2,000 ●Air Consumption (L/min): 415 ●Maximum Discharge (1cP/L/min): 32 ●Lift Height (m): 15 ●Suction Height (m): 5 ●Weight (kg): [AMH1-20FC] 8 [AMH1D-20FC] 13.4 [AMH1H-20FC] 12 《Mechanism of Vane Pump》 The center of the pump body is slightly offset from the center of the vane rotor, creating a structure where the vanes operate due to centrifugal force. *For more details, please refer to the PDF document or feel free to contact us.

Air-operated diaphragm pump capable of transferring high-viscosity oils and flammable liquids to high places or over long distances for solvent/drum use.

<Specifications> Usable container: 200L closed drum (JIS standard: large plug G2 / small plug G3/4) Pump type: diaphragm Liquid used: solvent (For details, please refer to the catalog) Usable viscosity: 2,500 cP Air consumption: 250L/min Supply pressure: 0.1–0.3Mpa Maximum discharge rate (at 1 cP): [DF4D-20AS] 19L/min, [DF6D-20AS/DF6D-20SUS] 28L/min (recommended supply pressure 0.3Mpa) Maximum lift height: [DF4D-20AS/DF6D-20AS/DF6D-20SUS] 25m Suction lift height: 2m Weight: [DF4D-20AS] 6.1kg, [DF6D-20AS] 7.1kg, [DF6D-20SUS] 11.0kg

For oil, kerosene, light oil, and gasoline / both ends of the hose: High-viscosity oil and flammable liquids can also be transferred to high places or long distances.

<Specifications> Type: Dual-end Hose Pump Method: Diaphragm Liquid Used: Oil, Kerosene, Light Oil, Gasoline (For details, please refer to the catalog) Usable Viscosity: 4,000 cP Air Consumption: 250 L/min Supply Pressure: 0.3–0.5 MPa Maximum Discharge Rate (at 1 cP): [DF4H-15G] 40 L/min, [DF6H-20G] 50 L/min Maximum Lifting Height: [DF4H-15G] 30 m, [DF6H-20G] 40 m Suction Lift: 2 m Weight: [DF4H-15G/DF6H-20G] 6.0 kg

High-viscosity oils and flammable liquids can be transported to high places or long distances for oil, kerosene, diesel, and gasoline/drum cans.

<Specifications> Usable container: 200L closed drum (JIS standard: large plug G2 / small plug G3/4) Pump type: Diaphragm Usable liquids: Oil, kerosene, light oil, gasoline (For details, please refer to the catalog) Usable viscosity: 4,000 cP Air consumption: 250 L/min Supply pressure: 0.3–0.5 MPa Maximum discharge rate (at 1 cP): [DF4D-20G] 32 L/min Maximum lift height: [DF4D-20G/DF6D-20G] 45 m Suction lift height: 2 m Weight: [DF4D-20G] 7.5 kg

The liquid contact materials have been upgraded to SUS, PTFE, and FFKM, allowing for a wider range of compatible liquids compared to our previous model (CHD-20A)! Suitable for solvent transfer in areas where open flames are prohibited.

**About the Ball Valve with Gun Nozzle** Optionally available in ball valve specifications! By installing a ball valve, it is possible to operate the valve open and close during liquid discharge. Model: CHD1-20ASUSN Compatible Container: 200L Closed Drum (JIS Standard: Large Plug G2 / Small Plug G3/4) Liquid Used: Solvent Usable Viscosity (cP): 100 Air Consumption (L/min): 583 (Recommended Supply Pressure 0.5Mpa) Operating Air Pressure (Mpa): 0.4 to 0.6 Compressor (Horsepower): 5 Discharge Pressure (Mpa): 0.035 Maximum Discharge Volume (1cP/L/min): [CHD1-20ASUS, CHD1-20ASUSV] 30 [CHD1-20ASUN] 20 Maximum Lifting Height (m): 3.5 Suction Lift Height (m): 2 Accessories: Discharge Hose: SUS Hose (Φ19×2m) Connection Type: Rc3/4 Nozzle: [CHD1-20ASUN] GN-SUS20 Material in Contact with Liquid: Main Body & Pipe: SUS304/SUS (SCS13)/ETFE Packing: PTFE/FFKM Weight (kg): [CHD1-20ASUS] 7.0 [CHD1-20ASUSV] 7.5 [CHD1-20ASUN] 8.1

Solvent use: High flow rate, high lift pressure-resistant explosion-proof motor pump! For the transfer and dispensing of flammable liquids (electric explosion-proof motor pump).

【Specifications (Excerpt)】 <EMM-25PP> ●Compatible Container: 200L Closed Drum (JIS Standard: Large Plug G2/Small Plug G3/4) ●Liquid Used: Solvent ●Compatible Viscosity (cP): 50 ●Power Supply (V): 100 (Pressure-resistant Explosion-proof/d2G4) ●Current (A): 2.4 ●Rated Time (min): 60 ●Discharge Pressure (Mpa): 0.08 ●Maximum Discharge Volume (1cP/L/min): 40 ●Maximum Lift Height (m): 8 ●Suction Lift Height (m): 2 ●Weight (kg): [EMM-25PP] 6.8 [EMM-25SUS] 11.6 *For more details, please refer to the PDF document or feel free to contact us.

AdBlue for purifying diesel exhaust gases: When you want to quickly portion out AdBlue from a resin drum.

<Specifications> Liquid used: AdBlue, water (For details, please refer to the catalog)

Convenient for supplying AdBlue in small quantities to cargo vehicles, construction machinery, agricultural machinery, and large vehicles.

<Specifications> Operating Liquid: AdBlue, Water Drive Method: 24V Rated (minutes): 20 Maximum Discharge Volume (1cP/L/min): 25 Maximum Lift Height (m): 6 Weight (kg): 16.0

For transporting fuel and water in places without power or during emergencies. Despite being a manual pump, it has excellent suction capability.

<Specifications> Liquid to be used: Oil, kerosene, light oil, water (For details, please refer to the catalog) Usable viscosity: 5000 cP

A manual hand diaphragm pump that is ideal for transporting fuel and water in places without power or during emergencies! Despite being a manual pump, it has excellent suction capability.

【Specifications (Excerpt)】 <Common Specifications for HDO-20 Series> ●Operating Fluids: Oil, Kerosene, Diesel, Water ●Usable Viscosity (cP): 5,000 ●Discharge Volume (cc/1 Stroke): 400 ●Suction Lift (m): 8 ●Delivery Lift (m): 8 ●Material: Body AL, Gasket NBR (with Reinforcement Fabric) <HDO-20ALA> ●Flange Type: Nipple Type Φ25 ●Weight (kg): 2.0 <HDO-20ALB> ●Flange Type: Screw Type Rc3/4 ●Weight (kg): 2.1 <HDO-25ALB> ●Flange Type: Screw Type Rc1 ●Weight (kg): 2.1 <HDO-20ALOZ> ●Flange Type: Coupler Type 25A ●Weight (kg): 2.1 《What is a Hand Diaphragm?》 It is a pump composed of a diaphragm (membrane) and two valves. By moving the diaphragm up and down or side to side, the volume changes to facilitate suction and discharge. Its feature is being sheetless, making it widely used for chemical transfer. *For more details, please refer to the PDF document or feel free to contact us.

Introducing cleaners that can filter cutting fluid without stopping the machine, and cleaners that can be used for cleaning during setup time!

【Lineup】 Circulation work without stopping the machine! Separates cutting fluid and chips! ■ Air-operated circulation filtration cleaner 'J-F Series' - Separates cutting fluid and chips without stopping the machine - No risk of electric leakage during continuous operation - Easy disposal of chips - Filtration capacity 60L/min < J-FS > Chip-specific SUS filter type Standard mesh < J-FF > Polishing-specific non-woven fabric filter type For aluminum, stainless steel, BC (CAC), resin, etc. Cleaning work solved in about 5 minutes! ■ Air-operated tank cleaning filtration cleaner 'APDQO Series' - High-speed cleaner with a recovery capacity of 110L/min and a discharge capacity of 140L/min - Can be washed thoroughly - Continuous operation is possible < APDQO-FS > Chip-specific SUS filter type < APDQO-FF > Polishing-specific non-woven fabric filter type *For details, please request documentation or view the PDF data from the download!

A vacuum cleaner for collecting oil and metal shavings in a pail can. Now more convenient with a hand switch.

<Specifications> Collected material: Oil (For details, please refer to the catalog) Usable viscosity: 3000cP (varies by nozzle) Maximum discharge rate: 80ℓ/min (at viscosity 1cP, lift height 0m) Compressor: 5 horsepower (2.25kW) or more Lift height: 2m (clean water)

A vacuum cleaner for collecting oil and metal shavings in a pail can. It is convenient for on-site cleaning as it is suitable for both dry and wet use.

<Specifications> Collected materials: Oil, kerosene, light oil, solvents (For details, please refer to the catalog) Usable viscosity: 3000cP (varies by nozzle) Maximum discharge rate: 60ℓ/min (at viscosity 1cP, lift 0m) Compressor: 3 horsepower (2.25kW) or more Lift: 2m (clean water)

All stainless steel, rust-resistant even in water.

<Specifications> Collection items: Water, water-soluble liquids, waste, and chips (between 100μm and 1cm) (For details, please refer to the catalog) Usable viscosity: 3000cP (varies by nozzle) Maximum discharge rate: 80ℓ/min (at viscosity 1cP, lift height 0m) Compressor: 5 horsepower or more Lift height: 2m (clean water) *Note* There has been a specification change for the stainless steel can (APPQO-SK) starting from shipments on April 22, 2024. The main differences are changes in the handle shape and weight reduction. Depending on the distributor, retailer, or our inventory, older models may be delivered. Please note that returns or exchanges will not be accepted in such cases. Thank you for your understanding.

A vacuum cleaner for collecting oil and metal shavings in a pail can. It is convenient for on-site cleaning as it is suitable for both dry and wet use.

<Specifications> Collection item: Oil (For details, please refer to the catalog) Usable viscosity: 3000cP (varies by nozzle) Maximum discharge rate: 80ℓ/min (at viscosity 1cP, lift height 0m) Compressor: 5 horsepower or more Lift height: 2m (clean water)

Minimum recovery particle size of 5.5μ for powder collection. Powder and dust recovery rate of over 98%.

<Common Specifications> Air Consumption (L/min): 580 Contact Parts Material Body & Nozzle: AL, SUS, SPHC Packing: NBR 【Model】 <APPQO-CY25 (for Pail)> Accessories Hose: Antistatic PVC (2m × φ25) Nozzle: Main Weight (kg): 8.0 <APPQO-CY25-SET (for Pail)> Accessories Can: 20L Carry: 20L Hose: Antistatic PVC (2m × φ25) Nozzle: Main Weight (kg): 11.5 <APPQO-CY25-DTC50 (for Pail)> Accessories Can: 50L Drum Lid: 50L Carry: 50L Hose: Antistatic PVC (2m × φ25) Nozzle: Main Weight (kg): 18.1 <APPQO-CY25-DTC100 (for Pail)> Accessories Can: 100L Drum Lid: 100L Carry: 100L Hose: Antistatic PVC (2m × φ25) Nozzle: Main Weight (kg): 18.1

Electric vacuum cleaner for collecting oil and metal shavings in a bucket. Convenient for site cleaning as it is suitable for both dry and wet use.

<Specifications> Collection Item: Oil (For details, please refer to the catalog) Usable Viscosity: 3000cP (varies by nozzle) Maximum Discharge Rate: 80ℓ/min (at viscosity 1cP, lift height 0m) Power Supply: 100V Lift Height: 2m (clean water)

A new filter ideal for chip recovery has arrived! A must-see for customers using NC lathes and machining centers!

【Bag Filter Size】 Bag filter for APDQO-F: Height 520 × Width 230 (mm) Bag filter for APDQO-F100: Height 380 × Width 230 (mm) Bag filter for J-FF: Height 330 × Width 210, Width lower part 110 (mm) 【J-F Series】 ■J-FS・J-FF Air consumption during intake: 230L/min Intake lift: 4m Dust collection capacity: 10L Maximum discharge amount: 60L/min Maximum intake amount: 60L/min 【APDQO-F Series】 ■APDQO-FS・APDQO-FF Air consumption during intake: 690L/min Intake lift: 2.5m Dust collection capacity: 180L Maximum discharge amount: 140L/min Maximum intake amount: 130L/min (supply air hose diameter φ6.5)・160L/min (supply air hose diameter φ12) ■APDQO-FS100・APDQO-FF100 Air consumption during intake: 320L/min Intake lift: 2.5m Dust collection capacity: 100L Maximum discharge amount: 140L/min Maximum intake amount: 100L/min (supply air hose diameter φ6.5)・120L/min (supply air hose diameter φ12)

Solvent / Wet and Dry Use: A vacuum cleaner that can collect solvents and metal shavings! Convenient for on-site cleaning due to its wet and dry capabilities.

【Specifications (Excerpt)】 ●Collected material: Solvent ●Usable viscosity (cP): 3,000 ●Air consumption (L/min): 315 ●Recommended supply pressure (Mpa): 0.4 to 0.6 ●Maximum suction amount (L/min): 60 ●Suction lift (m): 2 ●Wetted parts material ・Body/Nozzle: AL/SUS ・Packing: FKM ●Weight (kg): 4.9 *For more details, please refer to the PDF document or feel free to contact us.

[For kerosene and light oil / Wet and dry use] A vacuum cleaner that can collect kerosene and light oil! Convenient for site cleaning due to its wet and dry capabilities.

【Specifications (Excerpt)】 ●Collected substances: Kerosene, Light oil ●Usable viscosity (cP): 3,000 ●Air consumption (L/min): 315 ●Recommended supply pressure (Mpa): 0.4 to 0.6 ●Maximum suction volume (L/min): 60 ●Suction lift (m): 2 ●Material of wetted parts ・Body/Nozzle: AL/SUS ・Gasket: NBR ●Weight (kg): 4.9 *For more details, please refer to the PDF document or feel free to contact us.

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

【Specifications (Excerpt)】 ●Collected materials: Oil, cutting oil, waste, metal shavings (between 100μ and 1cm) ●Usable viscosity (cP): 3,000 ●Air consumption (L/min): 315 ●Recommended supply pressure (Mpa): 0.4 to 0.6 ●Maximum suction amount (L/min): 60 ●Suction lift (m): 2 ●Material of parts in contact with liquid ・Body and nozzle: AL/SUS ・Packing: NBR ●Weight (kg): 4.9 *For more details, please refer to the PDF document or feel free to contact us.

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

【Specifications (Excerpt)】 ●Collected materials: Oil, cutting oil, waste, metal shavings (between 100μ and 1cm) ●Usable viscosity (cP): 3,000 ●Air consumption (L/min): 315 ●Recommended supply pressure (Mpa): 0.4 to 0.6 ●Maximum suction amount (L/min): 60 ●Suction lift (m): 2 ●Material of parts in contact with liquid ・Body and nozzle: AL/SUS ・Packing: NBR ●Weight (kg): 4.5 *For more details, please refer to the PDF document or feel free to contact us.

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

【Specifications (Excerpt)】 ●Collected materials: Oil, cutting oil, waste, metal shavings (between 100μ and 1cm) ●Usable viscosity (cP): 3,000 ●Air consumption (L/min): 525 ●Recommended supply pressure (Mpa): 0.4 to 0.6 ●Maximum suction amount (L/min): 80 ●Suction lift (m): 2 ●Materials in contact with liquid ・Body and nozzle: AL/SUS ・Packing: NBR ●Weight (kg): 12.0 *For more details, please refer to the PDF document or feel free to contact us.

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

【Specifications (Excerpt)】 ●Collected materials: Oil, cutting oil, waste, chips (between 100μ and 1cm) ●Usable viscosity (cP): 3,000 ●Air consumption (L/min): 525 ●Recommended supply pressure (Mpa): 0.4 to 0.6 ●Maximum suction amount (L/min): 80 ●Suction lift (m): 2 ●Materials in contact with fluid ・Body and nozzle: AL/SUS ・Packing: NBR ●Weight (kg): 6.5 *For more details, please refer to the PDF document or feel free to contact us.

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

【Specifications (Excerpt)】 ●Collected materials: Oil, cutting oil, waste, metal shavings (between 100μ and 1cm) ●Usable viscosity (cP): 3,000 ●Air consumption (L/min): 525 ●Recommended supply pressure (Mpa): 0.4 to 0.6 ●Maximum suction volume (L/min): 80 ●Suction lift (m): 2 ●Material of wetted parts ・Body and nozzle: AL/SUS ・Packing: NBR ●Weight (kg): 4.8 *For more details, please refer to the PDF document or feel free to contact us.

Oil use / wet and dry use! Vacuum cleaner with silencer! A pail vacuum cleaner that can collect oil and metal shavings! Convenient for site cleaning due to its wet and dry capabilities.

【Specifications (Excerpt)】 ●Collected materials: Oil, cutting oil, waste, metal shavings (100μ or more, 1cm or less) ●Usable viscosity (cP): 3,000 ●Air consumption (L/min): 475 ●Recommended supply pressure (Mpa): 0.4 to 0.6 ●Maximum suction volume (L/min): 90 ●Suction lift (m): 2 ●Material of wetted parts ・Body/Nozzle: AL/SUS ・Packing: NBR ●Weight (kg): 11.1 *For more details, please refer to the PDF document or feel free to contact us.

Environmentally friendly oil dispersants, industrial high-performance oil cleaning agents, cleaning, cleanliness, cleaning, cleaner, cleaning, adsorption, decomposition, environmentally friendly, nature conservation.

Usage Instructions 1. Please spray directly onto the oil film floating on the water. 2. In cases where the road surface has unevenness due to spilled oil or if oil stains remain, spray and scrub with a brush. Finally, rinse with water. Precautions - For oil film removal, dilute to about 30 to 50 times. For oil that has soaked into the road surface, use a stronger dilution (about 20 times). - It is harmless to the human body, but if it gets into your eyes, wash it out thoroughly with plenty of water. If ingested, drink plenty of water and do not induce vomiting. Consult a doctor if any abnormalities occur. - After use, it can be disposed of as is, but if there are special regulations in your area, please follow them. - Store in a cool, dark place, avoiding direct sunlight. - Storage period [guideline]: 2 to 3 years (if unused), 1 to 2 years (if opened).

A vacuum cleaner for collecting oil and metal shavings, equipped with a foot switch for added convenience.

<Specifications> Collected material: Oil (For details, please refer to the catalog) Usable viscosity: 3000cP (varies by nozzle) Maximum discharge rate: 80ℓ/min (at viscosity 1cP, lift height 0m) Compressor: 5 horsepower (2.25kW) or more Lift height: 2m (clean water)

Collects everything from small stones to paper scraps. An eco-friendly, battery-free push cleaner.

<Specifications> AJL Series Model: AJL360 Collectable materials: Sand / Small stones / Hair / Breadcrumbs / Paper scraps / Wood chips Working width (mm): 360 Material: Pole handle: Stainless steel <Accessories> Dust box capacity (L): 1.5 Roller brush: ○ (2 pieces) External dimensions (mm): Total length: 95 Total width: 215 Total height: 465 Handle height (adjustable range): 470-950 Weight (kg): 1.5

Cutting fluids for machine tools can be reused! Tank cleaning time is significantly reduced!

**Filter Type** APDQO-FF100 (Non-woven Fabric Filter) By using non-woven fabric, it can be disposed of as is, making maintenance easy. ● Capable of filtering and reusing cutting oil for machine tools, etc. ● Can collect and return to the tank using air power with one unit serving two roles. ● Continuous operation is possible as it does not have a motor, making it ideal for long hours of work. APDQO-FF100 (Non-woven Fabric Filter) By using a stainless steel filter, it is designed for repeated use. ● Capable of filtering and reusing cutting oil for machine tools, etc. ● Can collect and return to the tank using air power with one unit serving two roles. ● Continuous operation is possible as it does not have a motor, making it ideal for long hours of work. ● SUS-made 40 mesh. APDQO-FB100 (Bag Filter) Compared to our conventional stainless steel filter, the cleaning time required for severe dirt is reduced to about 1/10. ● Easy to clean the filter. ● Less prone to clogging, making cleaning simple. ● Reduces dirt and unpleasant odors during cleaning.

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

【Specifications (Excerpt)】 ●Collected materials: Oil, cutting oil, waste, chips (100μ or more, 1cm or less) ●Usable viscosity (cP): 3,000 ●Air consumption (L/min): 475 ●Recommended supply pressure (Mpa): 0.4 to 0.6 ●Maximum suction amount (L/min): 90 ●Suction lift (m): 2 ●Material of wetted parts ・Body and nozzle: AL/SUS ・Packing: NBR ●Weight (kg): 5.6 *For more details, please refer to the PDF document or feel free to contact us.

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

【Specifications (Excerpt)】 ●Collected materials: Oil, cutting oil, waste, metal shavings (between 100μ and 1cm) ●Usable viscosity (cP): 3,000 ●Air consumption (L/min): 475 ●Recommended supply pressure (Mpa): 0.4 to 0.6 ●Maximum suction amount (L/min): 90 ●Suction lift (m): 2 ●Materials in contact with liquid ・Body and nozzle: AL/SUS ・Packing: NBR ●Weight (kg): 3.9 *For more details, please refer to the PDF document or feel free to contact us.

Electric vacuum cleaner for oil and wet/dry use! Convenient for site cleaning as it can collect oil and metal shavings.

【Specifications (Excerpt)】 ●Collected materials: Oil, cutting oil, garbage, metal shavings (between 100μ and 1cm) ●Usable viscosity (cP): 3,000 ●Power supply and current: 100V, 11A ●Maximum suction volume (L/min): 80 ●Suction lift (m): 2 ●Materials in contact with liquid ・Body/Nozzle: SUS/SPHC ・Packing: CR rubber/NBR/PVC ●Weight (kg): 15.5 *For more details, please refer to the PDF document or feel free to contact us.

Electric vacuum cleaner for oil and wet/dry use! Convenient for site cleaning as it can collect oil and metal shavings.

【Specifications (Excerpt)】 ●Collected materials: Oil, cutting oil, waste, chips (between 100μ and 1cm) ●Usable viscosity (cP): 3,000 ●Power supply/current: 100V, 11A ●Maximum suction volume (L/min): 80 ●Suction lift (m): 2 ●Materials in contact with liquid ・Body/Nozzle: SUS/SPHC ・Packing: CR rubber/NBR/PVC ●Weight (kg): 9.3 *For more details, please refer to the PDF document or feel free to contact us.

For dust collection: Minimum recovery particle size 5.5μ! Powder and dust recovery rate over 98%.

【Specifications (Excerpt)】 ＜APPQO-CY25/32＞ ●Collection Material: Dust (5.5–100μ) ●Air Consumption (L/min): 580 ●Recommended Supply Pressure (Mpa): 0.4–0.6 ●Material of Liquid Contact Parts ・Body/Nozzle: AL/SUS/SPHC ・Packing: CR Rubber/NBR ●Weight (kg): 8.0 ＜Others＞ Open Pail Can Carry Set (APPQO-CY25SET) 200L Drum Can, Top Plate, Carry Set (APPQO-CY25-DTB200) 100L Drum Can, Top Plate, Carry Set (APPQO-CY25-DTB100) 50L Drum Can, Top Plate, Carry Set (APPQO-CY25-DTB50) 200L Drum Can, Top Plate, Carry Set (APPQO-CY32-DTB200) 100L Drum Can, Top Plate, Carry Set (APPQO-CY32-DTB100) 50L Drum Can, Top Plate, Carry Set (APPQO-CY32-DTB50) *For more details, please refer to the PDF document or feel free to contact us.

【For water and water-soluble liquids / Wet and dry use】 Made of all stainless steel, does not rust in water.

【Specifications (Excerpt)】 ●Collection items: Water, water-soluble liquids ●Usable viscosity (cP): 3,000 ●Air consumption (L/min): 673 ●Recommended supply pressure (Mpa): 0.4 to 0.6 ●Maximum suction amount (L/min): 80 ●Suction lift (m): 2 ●Material of parts in contact with liquid ・Main body, nozzle: SUS ・Packing: NBR ●Weight (kg): 12.5 *For more details, please refer to the PDF document or feel free to contact us.

【For water and water-soluble liquids / Wet and dry use】 Made of all stainless steel, does not rust even in water.

【Specifications (Excerpt)】 ●Collection items: Water, water-soluble liquids ●Usable viscosity (cP): 3,000 ●Air consumption (L/min): 673 ●Recommended supply pressure (Mpa): 0.4 to 0.6 ●Maximum suction amount (L/min): 80 ●Suction lift (m): 2 ●Material of wetted parts ・Main body・Nozzle: SUS ・Packing: NBR ●Weight (kg): 5.0 *For more details, please refer to the PDF document or feel free to contact us.

Reusing cutting fluids for machine tools and tank cleaning.

**Filter Types** APDQO-FS (Stainless Steel Filter) This specification allows for repeated use by utilizing a stainless steel filter. - Capable of filtering and reusing cutting oil for machine tools and similar applications. - Can collect and return directly to the tank using air power, serving dual purposes. - Continuous operation is possible as it does not have a motor, making it ideal for long hours of work. - SUS-made 40 mesh. APDQO-FF (Non-woven Fabric Filter) This specification allows for easy disposal and maintenance by using non-woven fabric. - Capable of filtering and reusing cutting oil for machine tools and similar applications. - Can collect and return directly to the tank using air power, serving dual purposes. - Continuous operation is possible as it does not have a motor, making it ideal for long hours of work. APDQO-FB (Bag Filter) The cleaning time required when the dirt is severe compared to our conventional stainless steel filter is reduced to about 1/10. - Easy to clean the filter. - Less prone to clogging, making cleaning simple. - Reduces dirt and unpleasant odors during cleaning.

It is possible to circulate and filter cutting fluid without stopping the machine tools.

**Filter Types** J-FF (Non-woven Fabric Filter) By using non-woven fabric, it can be disposed of as is, making maintenance easy. - Capable of filtering and reusing cutting oil for machine tools, etc. - Can recover and return to the tank using air power, serving dual purposes. - No motor component allows for continuous operation, making it ideal for long hours of work. J-FS (Stainless Steel Filter) Utilizing a stainless steel filter allows for repeated use. - Capable of filtering and reusing cutting oil for machine tools, etc. - Can recover and return to the tank using air power, serving dual purposes. - No motor component allows for continuous operation, making it ideal for long hours of work. - SUS-made 40 mesh. J-FB (Bag Filter) Compared to our conventional stainless steel filter, the cleaning time required for severe dirt is reduced to about 1/10. - Easy to clean the filter. - Less prone to clogging, making cleaning simple. - Reduces dirt and unpleasant odors during cleaning.

Introducing the "Tank Cleaning and Filtration Cleaner" for customers using NC lathes and MC lathes, designed to reduce work burden and achieve efficient cutting fluid management.

<Common Specifications> Working Fluid: Water-soluble cutting fluid Usable Viscosity: 500cP <APDQO-F Series> Usable Container: 200L Open Drum Air Consumption During Suction: 690L/min Suction Lift: 2.5m Maximum Discharge Rate at 1cP: 140L/min Maximum Suction Rate with Supply Air Hose Diameter Φ6.5: 130L/min Body & Nozzle: AL/Acrylic/Iron/Bs Packing: NBR/FKM Weight (kg): 42.5/43 <APDQO-F100 Series> Usable Container: 100L Open Drum Air Consumption During Suction: 320L/min Suction Lift: 2.5m Maximum Discharge Rate at 1cP: 110L/min Maximum Suction Rate with Supply Air Hose Diameter Φ6.5: 100L/min Body & Nozzle: AL/Acrylic/Iron/Bs Packing: NBR/FKM Weight (kg): 30.5/30.7 <J-F Series> Air Consumption During Suction: 230L/min Suction Lift: 4m Maximum Discharge Rate at 1cP: 60L/min Maximum Suction Rate with Supply Air Hose Diameter Φ6.5: 60L/min Body & Nozzle: AL/Acrylic Packing: ABS Resin/NBR Weight (kg): 36.3/37

[Hose Nipple Specification] Usable in various situations from daily water transfer to securing water during disasters! Despite being a manual pump, it has excellent suction capability.

【Specifications (Excerpt)】 ● Liquid used: Water, seawater, kerosene, light oil, oil ● Usable viscosity (cP): 5,000 ● Discharge volume (cc/1 stroke): 400 ● Suction lift (m): 8 ● Delivery lift (m): 8 ● Flange type: Double nipple type Φ250 ● Material: Body POM, gasket NBR (with reinforcing fabric) ● Weight (kg): 1.1 《What is a Hand Diaphragm?》 It is a pump composed of a diaphragm (membrane) and two valves. By moving the diaphragm up and down or side to side, the volume changes to facilitate suction and discharge. Its feature is being sheetless, making it widely used for chemical transfer. *For more details, please refer to the PDF document or feel free to contact us.*

As emergency supplies for apartments and municipalities. For replenishing drinking water during disaster emergencies.

Model: EDO-40 Frequency: 50/60Hz Rated Current: 5.1/4.5A Rated Speed: 1420/1700rpm Power Consumption: 345/325w Output Shaft Torque 50Hz: 47Nm 60Hz: 39.2Nm Flow Rate 50Hz: 25L/MIN 60Hz: 30L/MIN Suction Lift: 4m Discharge Lift: 7m Weight: 36.5kg Model: EDO-50 Frequency: 50/60Hz Rated Current: 8.7/7.9A Rated Speed: 1440/1730rpm Power Consumption: 632/604w Output Shaft Torque 50Hz: 94Nm 60Hz: 78Nm Flow Rate 50Hz: 80L/MIN 60Hz: 100L/MIN Suction Lift: 5m Discharge Lift: 7m Weight: 60.0kg Model: EDO-50H Frequency: 50/60Hz Rated Current: 8.7/7.9A Rated Speed: 1440/1730rpm Power Consumption: 632/604w Output Shaft Torque 50Hz: 187Nm 60Hz: 156Nm Flow Rate 50Hz: 40L/MIN 60Hz: 50L/MIN Suction Lift: 5m Discharge Lift: 12m Weight: 60.0kg

For outdoor storage in cold and tropical regions. A thermal cover that protects containers from strong sunlight and rain.

For more details, please refer to the catalog or feel free to contact us.

Quickly transfer low-viscosity liquids for solvents.

【Specifications (Excerpt)】 ●Collection Material: Solvent *Limited to materials that do not corrode ●Usable Viscosity (cP): 2,500 ●Power Source: Air ●Air Consumption (L/min): 250 ●Recommended Supply Pressure (Mpa): 0.1 to 0.3 ●Maximum Discharge Capacity (1cP/L/min): 28 ●Maximum Discharge Lift (m): 30 ●Suction Lift (m): 2 ●Contact Parts Material ・Main Body: AL/SUS/BC (DF4P-15AS), SUS (DF4P-15SUS) ・Packing: PTFE/FFKM ●Weight (kg): 5.2 (DF4P-15AS), 6.0 (DF4P-15SUS) *For more details, please refer to the PDF document or feel free to contact us.

Ministry of Labor explosion-proof structure standard certification! A pump that can safely transport petroleum products using a pressure-resistant explosion-proof motor.

<Specifications SFC (for gasoline, kerosene, and diesel)> Model: SFC Compatible Container: 200L Closed Drum (JIS Standard: Large Plug G2 / Small Plug G3/4) Liquid Used: Gasoline, Kerosene, Diesel Compatible Viscosity: 80cP Power Supply: 100V Current: 1.8A at full load / 2.5A at startup Rating: Continuous operation possible Discharge Pressure: 50Hz: 0.04Mpa / 60Hz: 0.05Mpa Maximum Discharge Volume (at 1cP): 50Hz: 40L/min / 60Hz: 56L/min Maximum Lift Height: 50Hz: 4m / 60Hz: 5m Suction Lift Height: 2m <Accessories> Discharge Hose: Oil-resistant Rubber Hose (2m x Φ20) Connection Type: Rc3/4 Nozzle: Special Rubber Plug with 2P Ground Plug: Manual Gun (GN-AL20) Contact Parts Material: Body and Pipe AL/PA Packing: PTFE/FKM Power Cord: 7.0m Weight: 12.0kg

Safe and optimal pressure-resistant explosion-proof motor for the transfer of flammable liquids such as organic solvents and chemical agents.

<Specifications SHC-100 (for solvents)> Model: SHC-100 Usable container: 200L closed drum (JIS standard: large plug G2 / small plug G3/4) Liquid to be used: Solvent, biodiesel Usable viscosity: 80cP Power supply: 100V Current: 1.8A at full load / 2.5A at startup Rating: Continuous operation possible Discharge pressure: 50Hz: 0.04Mpa / 60Hz: 0.05Mpa Maximum discharge volume (at 1cP): 50Hz: 40L/min / 60Hz: 56L/min Maximum lift height: 50Hz: 4m / 60Hz: 5m Suction lift height: 2m <Accessories> Discharge hose: SUS hose (2m × Φ20) Connection type: Rc3/4 Nozzle: Special rubber plug with 2P ground Plug: Manual gun (GN-ALT20) Contact parts material: Body and pipe AL/PE Packing: PTFE/FKM Power cord: 7.0m Weight: 11.5kg

Convenient for supplying AdBlue in small quantities to cargo vehicles, construction machinery, agricultural machinery, and large vehicles.

<Specifications> Liquid used: AdBlue, water (For details, please refer to the catalog)

For dispensing liquids from pails and one-gallon cans. A convenient faucet that allows for easy dispensing like a server.

<Specifications> Fluid used: Medium viscosity oil

【For solvents / For liquids】Collecting low-viscosity liquids into closed pails.

【Specifications (Excerpt)】 ●Collection material: Solvent *Limited to materials that do not corrode ●Usable viscosity (cP): 1,000 ●Compatible pail (optional): JIS standard 20L closed pail / APPQ-CL *Optional item ●Air consumption (L/min): 105 ●Maximum suction amount (L/min): 60 ●Suction lift (m): 2 ●Wetted parts material ・Body/Nozzle: AL ・Packing: FFKM/SUS ●Weight (kg): 1.5 *For more details, please refer to the PDF document or feel free to contact us.

[For kerosene and light oil / Liquid only] Collect low-viscosity liquid into a closed pail can.

【Specifications (Excerpt)】 ●Collected substances: Kerosene, light oil ●Usable viscosity (cP): 1,000 ●Compatible drums (optional): JIS standard 20L closed drum / APPQ-CL *Optional item ●Air consumption (L/min): 105 ●Maximum suction amount (L/min): 60 ●Suction lift (m): 1.5 ●Material of liquid contact parts ・Body/Nozzle: AL ・Packing: NBR/SUS ●Weight (kg): 1.5 *For more details, please refer to the PDF document or feel free to contact us.

【For Oil / Liquid Only】Collecting low-viscosity liquids into closed pails.

【Specifications (Excerpt)】 ●Collection Material: Oil ●Usable Viscosity (cP): 1,000 ●Compatible Pail (Optional): JIS Standard 20L Closed Pail / APPQ-CL *Optional Item ●Air Consumption (L/min): 105 ●Maximum Suction Volume (L/min): 60 ●Suction Lift (m): 1.5 ●Material in Contact with Liquid ・Body/Nozzle: AL ・Packing: NBR/SUS ●Weight (kg): 1.5 *For more details, please refer to the PDF document or feel free to contact us.

[For kerosene and light oil / Liquid only] Collect low-viscosity liquid into open pails.

【Specifications (Excerpt)】 ●Collected substances: Kerosene, light oil ●Usable viscosity (cP): 1,000 ●Compatible pail (optional): JIS standard 20L open pail / APPQO-OP *Optional item ●Air consumption (L/min): 105 ●Maximum suction volume (L/min): 75 ●Suction lift (m): 2 ●Material of contact parts ・Main body/Nozzle: AL ・Gasket: NBR/SUS ●Weight (kg): 3.7 *For more details, please refer to the PDF document or feel free to contact us.

Collection of low-viscosity liquids into open pails for oil/liquid use.

【Specifications (Excerpt)】 ●Collection item: Oil ●Usable viscosity (cP): 1,000 ●Compatible pail (optional): JIS standard 20L open pail / APPQO-OP *Optional item ●Air consumption (L/min): 105 ●Maximum suction amount (L/min): 75 ●Suction lift (m): 2 ●Material of wetted parts ・Body/Nozzle: AL ・Packing: NBR/SUS ●Weight (kg): 3.4 *For more details, please refer to the PDF document or feel free to contact us.

For dispensing AdBlue in locations without power, for refilling from a back-in-box.

<Specifications> Liquid used: AdBlue, water (For details, please refer to the catalog)

Ideal for liquid level management.

<For Oil> Model: ZKT-D-OL / ZKT-P-OL Type: Drum / Pail Liquid Used: Oil Usable Viscosity (cP): 500 Connection Diameter: Φ21.7 Dimensions (Φ×mm): 65×990 (L850) / 65×500 (L360) Connection Material: Body SUS304 PTFE Weight (kg): 1.3 / 0.9 <For Water> Model: ZKT-D-W / ZKT-P-W Type: Drum / Pail Liquid Used: Water Connection Diameter: Φ21.7 Dimensions (Φ×mm): 65×990 (L850) / 65×500 (L360) Connection Material: Body SUS304 PTFE Weight (kg): 1.3 / 0.9 Model: E-C Type: Drum Liquid Used: Oil, Kerosene, Diesel Usable Viscosity (cP): 500 Connection Diameter: G2, G3/4 Dimensions (Φ×mm): 80×120 (Display Part) 22×300 (Float) Connection Material: Body PP/ABS/Kevlar-based Weight (kg): 0.2

Check the remaining amount in just 1 second by pressing a button! Liquid level gauge for drums and pails!

【Specifications (Excerpt)】 ＜ZKT-D-OL＞ ●Type: Drum ●Liquid Used: Oil ●Usable Viscosity (cP): 500 ●Connection Diameter: Φ21.7 ●Temperature Range 　・Operating (℃): -10 to 35 (depending on usage environment) 　・Storage (℃): -40 to 80 (depending on usage environment) ●Operating Humidity (%): 35 to 85 (during condensation) ●Dimensions (Φ×mm): 65×990 (L850) ●Connection Material: Body SUS304/PTFE ●Weight (kg): 1.3 *For more details, please refer to the PDF document or feel free to contact us.

It is convenient to attach it to the end of the hose when combined with an electric pump or air pump for AdBlue and water.

【Specifications】 ● Fluid used: AdBlue / Water ● Flow rate range (L/min): 6 to 120 ● Maximum operating pressure (Mpa): 0.3 ● Included fittings: Hose nipple (removable to G1 male / with cap and chain) ● Connection diameter: Φ25 ● Connection material: Body PP/SUS, Gasket NBR/FKM ● Weight (kg): 1.0 *For more details, please refer to the PDF document or feel free to contact us.

It is convenient to attach it to the end of the hose when combined with an electric pump or air pump for AdBlue and water.

【Specifications】 ● Liquid used: AdBlue / Water ● Flow rate range (L/min): 6 to 120 ● Maximum operating pressure (Mpa): 0.15 ● Included fittings: Swivel ● Connection diameter: Rc1 ● Connection material: Body PP/SUS, Gasket PTFE/NBR/FFKM ● Weight (kg): 1.9 *For more details, please refer to the PDF document or feel free to contact us.

It is convenient to attach it to the end of the hose when combined with an electric pump or air pump for AdBlue and water.

【Specifications】 ● Liquid used: AdBlue / Water ● Flow rate range (L/min): 6 to 120 ● Maximum operating pressure (Mpa): 0.15 ● Included fittings: Swivel (with cap and chain) ● Connection diameter: Rc1 ● Connection material: Body PP/SUS, Gasket NBR/FKM/PTFE ● Weight (kg): 1.0 *For more details, please refer to the PDF document or feel free to contact us.

It is convenient to attach it to the end of the hose when combined with electric pumps or air pumps for oil, light oil, and kerosene.

【Specifications】 ● Liquid used: Kerosene, light oil, oil ● Maximum operating pressure (Mpa): 1 ● Included fitting: Swivel ● Connection diameter: G1 ● Recommended hose: 25A ● Outlet pipe outer diameter (mm): 25 ● Connection material: Main body AL/Bs, gasket NBR ● Weight (kg): 0.6 *For more details, please refer to the PDF document or feel free to contact us.

Purifying diesel exhaust gases with AdBlue! When you want to quickly portion out AdBlue from a resin drum.

【Specifications (Excerpt)】 ● Fluid used: AdBlue ● Drive method: Air ● Supply air pressure (Mpa): 0.3 ● Air consumption (L/min): 235 ● Maximum discharge volume (at 1cP / L/min): 25 ● Lifting height (m): 3 ● Material: Pump/Nozzle PP/SUS/PTFE/ETFE, Packing FKM ● Weight (kg): 2.6 *For more details, please refer to the PDF document or feel free to contact us.

Hand-cranked pump that performs exceptionally well even in emergencies! Lightweight with a resin body, ideal for dispensing organic solvents.

【Specifications (Excerpt)】 <HRP-25Z> ●Compatible Container: 200L Closed Drum (JIS Standard: Large Plug G2/Small Plug G3/4) ●Liquid Used: Solvent ●Liquid Density: 1.1 or less ●Compatible Viscosity (cP): 500 ●Discharge Volume (cc/1 Stroke): 200 ●Lift Height (m): 2 ●Wetted Parts Material ・Main Body: PTFE/PPS/PP ・Packing: PPS/PTFE/PP ●Weight (kg): [HRP-25Z] 2.4 [HRP-25ZM] 2.8 *For more details, please refer to the PDF document or feel free to contact us.

Hand-cranked pump that performs exceptionally well even in emergencies! Lightweight body made of resin, suitable for dispensing organic solvents.

【Specifications (Excerpt)】 <HRP-25III> ●Compatible Container: 200L Closed Drum (JIS Standard: Large Plug G2/Small Plug G3/4) ●Liquid Used: Solvent ●Liquid Density: 1.1 or less ●Compatible Viscosity (cP): 500 ●Discharge Volume (cc/1 Stroke): 200 ●Lifting Height (m): 2 ●Materials in Contact with Liquid ・Main Body: SUS/PTFE/PPS ・Packing: PTFE/FFKM ●Weight (kg): [HRP-25III] 3.2 [HRP-25IIIH] 3.8 [HRP-25IIIHM] 4.5 *For more details, please refer to the PDF document or feel free to contact us.

Hand-cranked pump that performs exceptionally well even in emergencies! Made of all stainless steel, perfect for dispensing organic solvents.

【Specifications (Excerpt)】 ● Usable container: 200L closed drum (JIS standard: large plug G2 / small plug G3/4) ● Usable liquid: solvent ● Specific gravity: 1.5 or less ● Usable viscosity (cP): 500 ● Discharge volume (cc/1 stroke): 220 ● Lifting height (m): 2 ● Wetted parts material ・Main body: SUS13 (equivalent to SUS304) / PTFE ・Packing: PTFE / FFKM Weight [HRD-25SUS] 7.4kg [HRD-25SUSH] 8.0kg [HRD-25SUSHM] 8.7kg *For more details, please refer to the PDF document or feel free to contact us.

[Sanitary Product / Heller Joint Specification] Designed for the large-volume transfer of high-viscosity liquids; it is disassemblable for cleaning! This is a separate type air vacuum pump.

<Specifications> Usable Containers - 200L Closed Drum (JIS Standard: Large Plug G2 / Small Plug G3/4) - Sealed Negative Pressure Separate Type (Pump section and decompression section are separated) Liquid Used: Oil (For details, please refer to the catalog) Usable Viscosity: 4,000 cP Air Consumption: 310 L/min Suction Lift: 2 m Suction Amount (at 1 cP): [APDQS-1s] 74 L/min, [APDQS-1.5s] 197 L/min Weight: [APDQS-1s] 5.0 kg, [APDQS-1.5s] 6.0 kg <About Sanitary> Sanitary means hygienic, and it is used for pumps intended for food. The sanitary series of separate pumps is called sanitary because it uses sanitary pipes (easy to clean). *It does not fall under the Food Sanitation Act, so its use with food is not recommended.

[Sanitary product / H-elbow fitting specification] For large-capacity transfer of high-viscosity liquids; can be disassembled for cleaning.

<Specifications> Usable Containers: - 200L Closed Drum (JIS Standard: Large Plug G2 / Small Plug G3/4) - Sealed Negative Pressure Separate Type (Pump section and decompression section are separated) Liquid Used: Oil (For details, please refer to the catalog) Usable Viscosity: 4,000 cP Air Consumption: 310 L/min Suction Lift: 2 m Suction Amount (at 1 cP): 74 L/min Weight: 6.0 kg <About Sanitary> Sanitary means hygienic, and it is used for pumps intended for food use. The sanitary series of separate pumps uses sanitary pipes (easy to clean), which is why it is called sanitary. *It does not fall under the Food Sanitation Act, so its use with food is not recommended.

For solvents, acids, and alkalis: A separate type air vacuum pump for transferring high-viscosity liquids in large volumes, capable of disassembly and cleaning!

<Specifications> Usable Containers: - 200L Closed Drum (JIS Standard: Large Plug G2 / Small Plug G3/4) - Sealed Negative Pressure Separate Type (Pump and Decompression Sections are Divided) Liquid Used: Solvent (For details, please refer to the catalog) Usable Viscosity: 4,000 cP Air Consumption: 310 L/min Suction Lift: 2 m Suction Amount (at 1 cP): [APDQS-25SUS] 68 L/min, [APDQS-32SUS] 139 L/min Weight: [APDQS-25SUS] 6.3 kg, [APDQS-32SUS] 8.0 kg <About Sanitary> Sanitary means hygienic, and it is used for pumps intended for food use. The sanitary series of separate pumps is called sanitary because it uses sanitary pipes (easy to clean). *It does not fall under the Food Sanitation Act, so its use with food is not recommended.

For oil: Large-capacity transfer of high-viscosity liquids; disassemblable for cleaning.

<Specifications> Usable Containers: - 200L Closed Drum (JIS Standard: Large Plug G2 / Small Plug G3/4) - Sealed Negative Pressure Separate Type (Pump section and decompression section are separated) Liquid to be Used: Oil (For details, please refer to the catalog) Usable Viscosity: 4,000 cP Air Consumption: 310 L/min Suction Lift: 2 m Suction Volume (at 1 cP): 128 L/min Weight: 5.1 kg <About Sanitary> Sanitary means hygienic and is used for pumps intended for food use. The sanitary series of separate pumps is called sanitary because it uses sanitary pipes (easy to clean). *It does not comply with the Food Sanitation Act, so its use with food is not recommended.

Clean the factory effortlessly! Introducing the air-powered drum vacuum cleaner in a comic, along with the air-powered tank cleaning and filtration cleaner for cleaning around machine tools.

You can download the manga by scrolling down and clicking on the first item in the "Catalog." Air Vacuum Cleaner with Silencer【APPQO600】 ● Collected materials: Oil, cutting oil, garbage, metal shavings (between 100μ and 1cm) ● Usable viscosity (cP): 3,000 ● Air consumption (L/min): 475 ● Recommended supply pressure (Mpa): 0.4 to 0.6 ● Maximum suction volume (L/min): 90 ● Suction lift (m): 2 ● Liquid contact material: - Body and nozzle: AL/SUS - Packing: NBR ● Weight (kg): 5.6 Air Vacuum Cleaner【APPQO550】 ● Collected materials: Oil, cutting oil, garbage, metal shavings (between 100μ and 1cm) ● Usable viscosity (cP): 3,000 ● Air consumption (L/min): 525 ● Recommended supply pressure (Mpa): 0.4 to 0.6 ● Maximum suction volume (L/min): 80 ● Suction lift (m): 2 ● Liquid contact material: - Body and nozzle: AL/SUS - Packing: NBR ● Weight (kg): 6.5 *There are also vacuum cleaner sets available that come with "no oil stopper" or "T-shaped nozzle, pail, carry, etc."

Convenient when attached to the end of a hose in combination with an electric pump or air pump for AdBlue and water! The gun nozzle automatically stops when full.

【Specifications】 ● Liquid used: AdBlue / Water ● Flow rate range (L/min): 20 to 80 ● Maximum operating pressure (Mpa): 0.3 ● Included fittings: Swivel ● Connection diameter: Rc3/4 ● Connection material: Body Nylon/SUS, Gasket NBR/FKM ● Weight (kg): 2.1 *For more details, please refer to the PDF document or feel free to contact us.

Water absorption of 6m (2.5m when dry) and a lift height of 15m. Usable in locations without power supply.

<Specifications> Liquid used: Water (For details, please refer to the catalog)

Water absorption of 6m (2.5m when dry) and a lift height of 15m. Usable in locations without power supply.

<Specifications> Liquid used: Oil (For details, please refer to the catalog) Usable viscosity: 5000 cP (varies by nozzle)

Ideal for transporting drums. Easy to move with large wheels!

"Improvement Example" Movement of AdBlue drums in the transportation industry and others 【Current Situation/Problems】 × There is a distance to the construction and agricultural machinery that uses AdBlue × The drum and pump are separated, making management difficult × Want to use a pump for IBC containers, but there is no space for pump installation ⇩ 【Improvement Example】 Easy movement to the equipment that uses AdBlue Convenient management as the drum and pump can be installed together IBC container pumps can also be used with drums 〇 Environmental improvement 〇 Cost reduction TORRY-D Series Model: TORRY-D Compatible Product: AdBlue Pump Accessories: Hook for preventing drum tipping Material: Steel Size (mm): Total length 851 × Total width 760 × Height 1070 Weight (kg): 20

A heater that warms up drums and other containers to reduce the viscosity of liquids.

<HTJ-A-P> Recommended container: 20L pail / 18L one-gallon can Standard capacity (L): 25 Circumference (mm): 870–1,020 Height (mm): 400 Power (W): 200 Weight (kg): 2.0 <HTJ-B-50D> Recommended container: 50L drum Standard capacity (L): 50 Circumference (mm): 1,100–1,250 Height (mm): 460 Power (W): 250 Weight (kg): 2.0 <HTJ-C-100D> Recommended container: 100L drum Standard capacity (L): 100 Circumference (mm): 1,400–1,650 Height (mm): 370 Power (W): 400 Weight (kg): 3.0 <HTJ-D-200D> Recommended container: 200L drum Standard capacity (L): 210 Circumference (mm): 1,800–1,950 Height (mm): 440 Power (W): 450 Weight (kg): 3.0 <Common to the above three types> Heating wire set temperature (°C): 0–90 Outer material: Polyurethane-coated nylon (black) Internal insulation material: Polyurethane-coated nylon (black) Specification table "Applications/Examples of Achievements" follows.

The liquid contact materials have been upgraded to SUS, PTFE, and FFKM, allowing for a greater variety of compatible liquids compared to our previous model (CHD-20SUS)! Suitable for solvent transfer in chemical plants.

"About the Ball Valve with Gun Nozzle" Supports ball valve specifications as an option! By installing a ball valve, valve opening and closing operations are possible during liquid discharge. Model: CHD1-20SUS/CHD1-20SUSV/CHD1-20SUSN Compatible container: 200L closed drum (JIS standard: large plug G2/small plug G3/4) Liquid used: solvent Usable viscosity: 100cP Power supply: AC100V single phase Power consumption: 200w Current: 2A Rated (minutes): Continuous operation possible Discharge pressure: 0.04Mpa Maximum discharge amount (at 1cP): [CHD1-20SUS/CHD1-20SUSV] 33L/min [CHD1-20SUSN] 25L/min Maximum lift height: 4m Suction lift height: 2m Accessories: Discharge hose: SUS hose (2m x Φ20) Connection type: Rc3/4 Materials in contact with liquid: Main body/Pipe: SUS304/SUS (SCS13)/ETFE/PTFE Gasket: PTFE/FFKM Power cord (m): 3 Weight: [CHD1-20SUS] 7.5kg [CHD1-20SUSV] 8.0kg [CHD1-20SUSN] 8.6kg

Portable electric hand pump. High-speed transfer of kerosene and diesel.

<Specifications> Fluid used: Kerosene, Light oil (For more details, please refer to the catalog) Usable viscosity: 100cP (varies by nozzle) Maximum discharge rate: 20ℓ/min (at viscosity 1cP, lift height 0m) Power supply: 100V Lift height: 10m (clean water)

Ideal for liquid management - a mechanical flow meter that measures discharge volume.

【Specifications (Excerpt)】 ＜MK33-25D＞ ●Measurement Method: Disk (Mechanical Digital Display) ●Applicable Liquids: [MK33-25D] Kerosene, Light Oil [MK33-25OL] Oil (Usable Viscosity 1,000 cP) ●Flow Rate Range (L/min): 20 to 120 ●Maximum Operating Pressure (Mpa): 1 ●Connection Diameter: G1 Female at Both Ends ●Maximum Display Scale (L): Settlement 3 Digits (999.9/Right Scale 0.1), Total Settlement 6 Digits (999999) ●Accuracy (%): ±1 (Repeatability 0.2) ●Connection Material: Body AL/Polybutylene Terephthalate Resin, Packing NBR ●Weight (kg): 2.0 *For more details, please refer to the PDF document or feel free to contact us.

Oil-use JIS standard drum can liquid level gauge! For managing residual liquid in drum cans.

【Specifications】 ●Type: Drum ●Liquid used: Oil, kerosene, light oil ●Usable viscosity (cP): 500 ●Connection diameter: G2, G3/4 ●Temperature range: Operating (°C) 0 to 60, Storage (°C) 0 to 60 ●Dimensions (Φ×mm): 80×120 (display part) 22×300 (float) ●Connection material: Main body PP/ABS/Kevlar type ●Weight (kg): 0.2 *For more details, please refer to the PDF document or feel free to contact us.

A convenient stand with a tray that allows for the vertical storage of a drum pump.

【Specifications】 ●Material: SUS ●External dimensions (mm) 　・Total length: 520 　・Total width: 410 　・Total height: 996 ●Weight (kg): 5.22 *For more details, please refer to the PDF document or feel free to contact us.

Drum pump nozzle storage available for drum cans.

【Specifications】 ●Material: SUS ●Outer diameter dimensions (mm) 　・Total length: 73.2 　・Total width: 51 　・Total height: 70 ●Weight (kg): 0.12 *For more details, please refer to the PDF document or feel free to contact us.

Ideal for managing AdBlue liquid - Digital flow meter for measuring discharge volume.

【Specifications】 ● Measurement method: Turbine ● Liquid used: AdBlue, water ● Flow rate range (L/min): 6 to 120 ● Maximum operating pressure (Mpa): 2 ● Connection diameter: Both ends G1 male (includes one G1 socket) ● Maximum display scale (L): Settlement 5 digits (0.01 to 99999) / Total settlement 6 digits (0.1 to 999999) ● Accuracy (%): ±1 (Repeatability 0.2) ● Connection material: Body PP/SUS, gasket NBR ● Weight (kg): 0.4 *For more details, please refer to the PDF document or feel free to contact us.

[For kerosene and light oil] Ideal for liquid management, digital flow meter to measure discharge volume.

【Specifications】 ● Measurement method: Turbine (LCD digital display) ● Liquid used: Kerosene, light oil ● Flow rate range (L/min): 6 to 120 ● Maximum operating pressure (Mpa): 2 ● Connection diameter: G1 male, G1 female (inlet/outlet interchangeable) ● Maximum display scale (L): Settlement 5 digits (0.01 to 99999) / Total settlement 6 digits (0.1 to 999999) ● Accuracy (%): ±1 (repeatability 0.2) ● Connection material: Body AL/PVDF/SUS316/Ceramic, Gasket NBR ● Weight (kg): 0.4 *For more details, please refer to the PDF document or feel free to contact us.*

Convenient when attached to the end of a hose in combination with an electric pump or air pump for AdBlue and water! The gun nozzle automatically stops when full.

【Specifications】 ● Liquid used: AdBlue / Water ● Flow rate range (L/min): 20 to 80 ● Maximum operating pressure (Mpa): 0.2 ● Included fittings: Hose nipple (removable to G1 male / with cap chain) ● Connection diameter: Φ25 ● Connection material: Body PP/SUS, Gasket NBR/FKM ● Weight (kg): 1.0 *For more details, please refer to the PDF document or feel free to contact us.

Convenient when attached to the end of a hose in combination with an electric pump or air pump for AdBlue and water! The gun nozzle automatically stops when full.

【Specifications】 ● Liquid used: AdBlue / Water ● Flow rate range (L/min): 15 to 45 ● Maximum operating pressure (Mpa): 0.15 to 0.35 ● Included fittings: Hose nipple (removes to G1 male) ● Connection diameter: Φ20 ● Connection material: Body PP/SUS, Gasket FKM ● Weight (kg): 1.0 *For more details, please refer to the PDF document or feel free to contact us.

It's convenient to attach it to the end of a hose when combined with an electric pump or air pump! Cost management with oil management allows for measuring, weighing, and stopping with preset quantities.

【Specifications】 ●Fluid used: For oil ●Usable viscosity (cP): 2,000 ●Flow range (L/min): 1 to 30 ●Maximum operating pressure (Mpa): 7 ●Included fittings: Swivel ●Connection diameter: G1/2 female ●Connection material: Body AL/PP/FRP/Iron/SUS, Packing NBR/FKM ●Weight (kg): 2.1 *For more details, please refer to the PDF document or feel free to contact us.

It's convenient to attach it to the end of a hose when combined with an electric pump or air pump! The auto-stop gun nozzle automatically stops when full.

【Specifications (Excerpt)】 ● Liquid used: Kerosene, Light oil ● Flow rate range (L/min): 30 to 80 ● Maximum operating pressure (Mpa): 0.2 ● Included fittings: Swivel ● Connection diameter: [ATNH-20K24] Rc3/4 [ATNH-25K24] Rc1 ● Connection material: Body AL/PP/FRP/Iron/SUS, Gasket NBR/FKM ● Weight (kg): 2.1 * ATNH-FAK24 is exclusively for Koshin FA-100 * ATNH-FRK24 is exclusively for Koshin FA-200 * For more details, please refer to the PDF document or feel free to contact us.

It is convenient to attach it to the end of a hose when combined with an electric pump or air pump for oil use.

【Specifications】 ●Operating fluid: Oil ●Available viscosity (cP): 2,000 ●Flow rate range (L/min): 8 to 60 ●Maximum operating pressure (Mpa): 7 ●Included fittings: Swivel ●Connection diameter: Rc3/4 ●Connection material: Body AL/PP/FRP/Iron/SUS, Gasket NBR ●Weight (kg): 2.9 *For more details, please refer to the PDF document or feel free to contact us.

It is convenient to attach it to the end of a hose when combined with an electric pump or air pump.

【Specifications (Excerpt)】 <GN-AL3025K24> ● Liquid used: Kerosene, light oil ● Flow rate range (L/min): 6 to 120 ● Maximum operating pressure (Mpa): 1 ● Included fittings: Swivel ● Connection diameter: Rc1 ● Connection material: Body AL/PP/FRP/Iron/SUS/Bs, Gasket NBR/FKM ● Weight (kg): 1.3 *For more details, please refer to the PDF document or feel free to contact us.

It is convenient to attach it to the end of a hose when combined with an electric pump or air pump for light oil and kerosene.

【Specifications】 ● Liquid used: Kerosene, light oil ● Flow rate range (L/min): 6 to 120 ● Maximum operating pressure (Mpa): 0.15 ● Included fittings: Swivel ● Connection diameter: Rc1 ● Connection material: Body AL/PP/FRP/Iron/SUS, Gasket NBR/FKM ● Weight (kg): 1.3 *For more details, please refer to the PDF document or feel free to contact us.

The 【ATNP-PP25Ad/ATNP-SUS20-Ad】 is convenient when attached to the end of a hose in combination with electric pumps or air pumps!

【Specifications (Excerpt)】 <ATNP-PP25-Ad> ● Liquid used: AdBlue, water ● Flow rate range (L/min): 20 to 80 ● Maximum operating pressure (Mpa): 0.35 ● Included fittings: Hose nipple (with cap and chain) ● Connection diameter: Φ25 ● Recommended hose: Inner diameter Φ25 ● Outlet pipe outer diameter (mm): 19 ● Connection material: Body SUS/PP, gasket FKM ● Weight (kg): 0.7 <ATNP-SUS20-Ad> ● Liquid used: AdBlue, water ● Flow rate range (L/min): 20 to 80 ● Maximum operating pressure (Mpa): 0.3 ● Included fittings: Hose nipple ● Connection diameter: Φ20 ● Recommended hose: Inner diameter Φ19 ● Outlet pipe outer diameter (mm): 19 ● Connection material: Body SUS/Nylon, gasket FKM ● Weight (kg): 2.3 *For more details, please refer to the PDF document or feel free to contact us.

Convenient when attached to the end of a hose in combination with electric pumps or air pumps for solvents! The gun nozzle automatically stops when full.

【Specifications (Excerpt)】 ＜ATNH-20T＞ ●Fluid used: Solvent ●Flow rate range (L/min): 30 to 80 ●Maximum operating pressure (Mpa): 0.2 ●Included fittings: Swivel ●Connection diameter: Rc3/4 ●Recommended hose: 20A ●Outlet pipe outer diameter (mm): 24 ●Connection material: Body AL, Gasket PTFE/FFKM ●Weight (kg): 1.5 ＜ATNH-25T＞ ●Fluid used: Solvent ●Flow rate range (L/min): 30 to 80 ●Maximum operating pressure (Mpa): 0.2 ●Included fittings: Swivel ●Connection diameter: Rc1 ●Recommended hose: 25A ●Outlet pipe outer diameter (mm): 24 ●Connection material: Body AL, Gasket PTFE/FFKM ●Weight (kg): 2.0 *For more details, please refer to the PDF document or feel free to contact us.

It's convenient to attach it to the end of a hose when combined with an electric pump or air pump! The gun nozzle automatically stops when it's full.

【Specifications (Excerpt)】 ＜ATNH-20＞ ●Liquid used: Kerosene, light oil ●Flow rate range (L/min): 30 to 80 ●Maximum operating pressure (Mpa): 0.2 ●Included fittings: Swivel ●Connection diameter: Rc3/4 ●Recommended hose: 20A ●Outlet pipe outer diameter (mm): 24 ●Connection material: Body AL, Gasket NBR/FKM ●Weight (kg): 1.5 ＜ATNH-25＞ ●Liquid used: Kerosene, light oil ●Flow rate range (L/min): 60 to 90 ●Maximum operating pressure (Mpa): 0.2 ●Included fittings: Swivel ●Connection diameter: Rc1 ●Recommended hose: 25A ●Outlet pipe outer diameter (mm): 30 ●Connection material: Body AL, Gasket NBR/FKM ●Weight (kg): 1.5 ＜ATNH-FA＞ ●Liquid used: Kerosene, light oil ●Flow rate range (L/min): 30 to 80 ●Maximum operating pressure (Mpa): 0.2 ●Outlet pipe outer diameter (mm): 24 ●Connection material: Body AL, Gasket NBR/FKM ●Weight (kg): 1.5 ※Dedicated model for Koshin FA-100 ※For more details, please refer to the PDF document or feel free to contact us.

It is convenient to attach it to the end of the hose when combined with an electric pump or air pump for solvents.

【Specifications (Excerpt)】 <GN-SUS20/GN-SUS25> ● Liquid used: Solvent ● Maximum operating pressure (Mpa): 0.15 ● Included fittings: Swivel ● Connection diameter: [GN-SUS20] Rc3/4 [GN-SUS25] Rc1 ● Recommended hose: [GN-SUS20] 20A [GN-SUS25] 25A ● Outlet pipe outer diameter (mm): 22.3 ● Connection material: Body SUS, Gasket PTFE/FFKM ● Weight (kg): 1.3 *For more details, please refer to the PDF document or feel free to contact us.

It is convenient to attach it to the end of the hose when combined with an electric pump or air pump for AdBlue.

【Specifications】 〈GN-PPS20-Ad〉 ●Liquid used: AdBlue ●Maximum operating pressure (Mpa): 0.3 ●Included fittings: Hose nipple ●Connection diameter: Φ20 (removes to G1 male) ●Recommended hose: Inner diameter Φ19 ●Discharge pipe outer diameter (mm): 18 ●Connection material: Body PP/SUS, Gasket NBR ●Weight (kg): 0.4 〈GN-PPS25-Ad〉 ●Liquid used: AdBlue ●Maximum operating pressure (Mpa): 0.3 ●Included fittings: Hose nipple (with cap and chain) ●Connection diameter: Φ25 (removes to G1 male) ●Recommended hose: Inner diameter Φ25 ●Discharge pipe outer diameter (mm): 18 ●Connection material: Body PP/SUS, Gasket NBR ●Weight (kg): 0.5 *For more details, please refer to the PDF document or feel free to contact us.

It is convenient to attach it to the end of a hose when combined with an electric pump or air pump for water use.

【Specifications】 ● Liquid used: Water, AdBlue ● Maximum operating pressure (Mpa): 0.3 ● Included fittings: Hose nipple ● Connection diameter: Φ25 (removes to G1 male) ● Recommended hose: Inner diameter Φ25 ● Outlet pipe outer diameter (mm): 25.5 ● Connection material: Body PP/SUS, Gasket NBR ● Weight (kg): 0.2 *For more details, please refer to the PDF document or feel free to contact us.

[For Oil] A hand-operated pump that performs exceptionally well even in emergencies! High discharge capacity of 1L per rotation, suitable for transferring low-viscosity liquids.

【Specifications (Excerpt)】 ● Usable container: 200L closed drum (JIS standard: large plug G2 / small plug G3/4) ● Usable liquids: kerosene, light oil, A heavy oil, oil ● Usable viscosity (cP): 500 ● Discharge volume (cc/1 stroke): 1,000 ● Maximum lift height (m): 2 ● Contact material ・Main body: AL/Zinc ・Packing: NBR ● Weight (kg): 8.0 *For more details, please refer to the PDF document or feel free to contact us.

It is convenient to attach it to the end of a hose when combined with electric pumps or air-operated pumps for solvents, AdBlue, and water.

【Specifications (Excerpt)】 ＜GN-PP20＞ ● Liquid used: Solvent, AdBlue, Water ● Maximum operating pressure (Mpa): 0.15 ● Included fittings: Swivel (with cap and chain) ● Connection diameter: Rc3/4 ● Recommended hose: 20A ● Outlet pipe outer diameter (mm): 28 ● Connection material: Body PP/SUS, Gasket FKM ● Weight (kg): 0.4 ＜GN-PP25＞ ● Liquid used: Solvent, AdBlue, Water ● Maximum operating pressure (Mpa): 0.15 ● Included fittings: Swivel (with cap and chain) ● Connection diameter: Rc1 ● Recommended hose: 25A ● Outlet pipe outer diameter (mm): 28 ● Connection material: Body PP/SUS, Gasket FKM ● Weight (kg): 0.4 *For more details, please refer to the PDF document or feel free to contact us.

It is convenient to attach it to the end of a hose when combined with electric pumps or air pumps for solvents.

【Specifications (Excerpt)】 ＜GN-ALT20＞ ●Liquid Used: Solvent ●Maximum Operating Pressure (Mpa): 0.15 ●Included Fitting: Swivel ●Connection Diameter: Rc3/4 ●Recommended Hose: 20A ●Outlet Pipe Outer Diameter (mm): 22.3 ●Connection Material: Body AL/SUS, Gasket PTFE/FFKM ●Weight (kg): 0.7 ＜GN-ALT25＞ ●Liquid Used: Solvent ●Maximum Operating Pressure (Mpa): 0.15 ●Included Fitting: Swivel ●Connection Diameter: Rc1 ●Recommended Hose: 25A ●Outlet Pipe Outer Diameter (mm): 22.3 ●Connection Material: Body AL/SUS, Gasket PTFE/FFKM ●Weight (kg): 0.7 *For more details, please refer to the PDF document or feel free to contact us.

It is convenient to attach it to the end of a hose when combined with electric pumps or air pumps for oil, diesel, kerosene, and gasoline.

【Specifications (Excerpt)】 ＜GN-AL20＞ ●Liquid used: Oil, kerosene, diesel, gasoline ●Maximum operating pressure (Mpa): 0.15 ●Included fitting: Swivel ●Connection diameter: Rc3/4 ●Recommended hose: 20A ●Outlet pipe outer diameter (mm): 22.3 ●Connection material: Body AL/SUS, gasket NBR/FKM ●Weight (kg): 0.7 ＜GN-AL25＞ ●Liquid used: Oil, kerosene, diesel, gasoline ●Maximum operating pressure (Mpa): 0.15 ●Included fitting: Swivel ●Connection diameter: Rc1 ●Recommended hose: 25A ●Outlet pipe outer diameter (mm): 22.3 ●Connection material: Body AL/SUS, gasket NBR/FKM ●Weight (kg): 0.7 *For more details, please refer to the PDF document or feel free to contact us.

Easily dispense AdBlue from an IBC container with a supply tank located at a high position! There are also types that automatically stop when full and allow you to check the amount used.

【Specifications (Excerpt)】 ● Liquid used: AdBlue ● Drive method: Electric 100V ● Maximum discharge capacity (at 1cP / L/min): 22 ● Lifting height (m): 6 ● Material: Pump/Nozzle PP/SUS/PE, Packing FKM/EPDM ● Weight (kg): 12.0 *For more details, please refer to the PDF document or feel free to contact us.

Easily dispense AdBlue from IBC containers with a supply tank located at a high position! There are also types that automatically stop when full and allow you to check the usage amount.

【Specifications (Excerpt)】 ● Liquid used: AdBlue ● Drive method: Electric 100V ● Maximum discharge capacity (at 1cP/L/min): 20 ● Lifting height (m): 6 ● Material: Pump/Nozzle PP/SUS/PE, Packing FKM/EPDM ● Weight (kg): 12.0 *For more details, please refer to the PDF document or feel free to contact us.

Easily dispense AdBlue from IBC containers with a supply tank located at a high position! There are also types that automatically stop when full and allow you to check the usage amount.

【Specifications (Excerpt)】 ● Liquid used: AdBlue ● Drive method: Electric 100V ● Maximum discharge capacity (at 1cP / L/min): 20 ● Lifting height (m): 6 ● Material: Pump/Nozzle PP/SUS/PE, Gasket FKM/EPDM ● Weight (kg): 12.0 *For more details, please refer to the PDF document or feel free to contact us.

AdBlue for purifying diesel exhaust gases! Dispensing AdBlue in places without a power supply.

【Specifications (Excerpt)】 ● Liquid used: AdBlue ● Drive method: Lithium charging ● Maximum discharge capacity (at 1cP/L/min): HIGH 30 ● Lifting height (m): HIGH 4, LOW 2 ● Material: Pump/Nozzle PP/SUS/PTFE/ETFE, Packing FKM ● Weight (kg): 3.3 *For more details, please refer to the PDF document or feel free to contact us.

AdBlue for purifying diesel exhaust gases! When you want to quickly portion out AdBlue contained in an IBC container.

【Specifications (Excerpt)】 ● Liquid used: AdBlue ● Drive method: Air ● Supply air pressure (Mpa): 0.3 ● Air consumption (L/min): 235 ● Maximum discharge amount (at 1cP / L/min): 25 ● Lifting height (m): 3 ● Material: Pump/Nozzle PP/SUS/PTFE/ETFE, Packing FKM ● Weight (kg): 2.9 *For more details, please refer to the PDF document or feel free to contact us.

AdBlue for purifying diesel exhaust gases! When you want to quickly portion out AdBlue contained in an IBC container.

【Specifications (Excerpt)】 ● Liquid used: AdBlue ● Drive method: Electric 100V ● Maximum discharge capacity (1cP/L/min): 30 ● Lifting height (m): 5 ● Material: Pump/Nozzle PP/SUS/PTFE/ETFE, Packing FKM ● Weight (kg): 3.1 *For more details, please refer to the PDF document or feel free to contact us.

AdBlue for purifying diesel exhaust gases! Dispensing AdBlue in places without power.

【Specifications (Excerpt)】 ● Liquid used: AdBlue ● Drive method: Lithium charging ● Maximum discharge rate (1cP/L/min): HIGH 30 ● Lift height (m): HIGH 4, LOW 2 ● Material: Pump/Nozzle PP/SUS/PTFE/ETFE, Packing FKM ● Weight (kg): 3 *For more details, please refer to the PDF document or feel free to contact us.

Purifying diesel exhaust gases with AdBlue! When you want to quickly portion out AdBlue contained in a resin drum.

【Specifications (Excerpt)】 ● Liquid used: AdBlue ● Drive method: Electric 100V ● Maximum discharge capacity (at 1cP / L/min): 30 ● Lifting height (m): 5 ● Material: Pump/Nozzle PP/SUS/PTFE/ETFE, Packing FKM ● Weight (kg): 2.8 *For more details, please refer to the PDF document or feel free to contact us.

[Oil, kerosene, light oil, and water / screw connection specification] For transferring fuel or water in places without power or during emergencies! Large capacity type 2,000cc/stroke.

【Specifications (Excerpt)】 <HDO Series HDO-50AL> ● Liquid used: Oil, kerosene, light oil, water ● Usable viscosity (cP): 5,000 ● Discharge volume (cc/1 stroke): 2,000 ● Suction lift (m): 4 ● Delivery lift (m): 7 ● Material: Pump and handle AL, packing NBR (reinforced fabric included) ● Weight (kg): 9.2 《What is a Hand Diaphragm?》 It is a pump composed of a diaphragm and two valves. By moving the diaphragm up and down or side to side, the volume changes to facilitate suction and discharge. Its feature is being sheetless, making it widely used for chemical transfer. *For more details, please refer to the PDF document or feel free to contact us.

[Oil, kerosene, light oil, and water / screw connection specification] For transferring fuel or water in places without power or during emergencies! Emergency water supply pump kit.

【Specifications (Excerpt)】 <KT-HDOS-32ALB / KT-HDOS-40ALB> ● Liquid used: Oil, kerosene, light oil, water ● Usable viscosity (cP): 5,000 ● Discharge volume (cc/1 stroke): 1,300 ● Suction lift (m): 5 ● Delivery lift (m): 7 ● Material: Pump and handle AL, packing NBR (with reinforcement fabric) ● Weight (kg): [KT-HDOS-32ALB] 12.5 [KT-HDOS-40ALB] 14 《As an emergency pump》 ● Capable of suctioning up to the 2nd or 3rd floor of a building ● Can be used for refueling emergency power supplies on building rooftops ● For transferring toilet water or water tanks in emergencies 《Hand diaphragm》 This pump consists of a diaphragm and two valves. By moving the diaphragm up and down or side to side, the volume changes to facilitate suction and discharge. Its feature is being sheetless, making it widely used for chemical transfer. *For more details, please refer to the PDF document or feel free to contact us.

[For oil, kerosene, diesel, and water / Screw connection specification] Ideal for transferring fuel or water in places without power or during emergencies! Despite being a manual pump, it has excellent suction capability.

【Specifications (Excerpt)】 <ST-HDOS-32ALB/ST-HDOS-40ALB> ● Liquid used: Oil, kerosene, light oil, water ● Usable viscosity (cP): 5,000 ● Discharge volume (cc/1 stroke): 1,300 ● Suction lift (m): 5 ● Delivery lift (m): 7 ● Material: Pump and handle AL, packing NBR (with reinforcement fabric) ● Weight (kg): 5.3 《What is a Hand Diaphragm?》 It is a pump composed of a diaphragm and two valves. By moving the diaphragm up and down or side to side, the volume changes to facilitate suction and discharge. Its feature is being sheetless, making it widely used for chemical transfer. *For more details, please refer to the PDF document or feel free to contact us.

[For oil, kerosene, diesel, and water / Screw connection specification] Ideal for transferring fuel or water in places without power or during emergencies! Despite being a manual pump, it has excellent suction capability.

【Specifications (Excerpt)】 <HDO-32 (40) ALB> ●Liquid used: Oil, kerosene, light oil, water ●Usable viscosity (cP): 5,000 ●Discharge volume (cc/1 stroke): 1,300 ●Suction lift (m): 5 ●Delivery lift (m): 7 ●Flange type: [HDO-32ALB] Screw type Rc1″1/4 [HDO-40ALB] Screw type Rc1″1/2 ●Material: Body AL, gasket NBR (with reinforcing fabric) ●Weight (kg): 3.9 《What is a Hand Diaphragm?》 It is a pump composed of a diaphragm and two valves. By moving the diaphragm up and down or side to side, the volume changes to facilitate suction and discharge. Its feature is that it is sheetless, making it widely used for chemical transfer. *For more details, please refer to the PDF document or feel free to contact us.

【All brass / water use】 Water absorption 6m (2.5m when dry) with a performance of 15m lift! Usable in places without power supply.

【Specifications (Excerpt)】 <BCNo.0-15> ● Liquid used: Water ● Discharge volume (cc/1 stroke): 240 ● Connection flange (with phase flange): Rc1/2 (15A) ● Accessories ・ Main body parts: CAC/SUS ・ Handle: AL ・ Packing: PTFE/NBR (Non-asbestos) ● Weight (kg): 5.5 *For more details, please refer to the PDF document or feel free to contact us.

Easily dispense high-viscosity liquids from pails or drums into smaller containers.

【Specifications (Excerpt)】 ●Collected substances: Oil, kerosene, light diesel ●Usable viscosity (cP): 10,000 ●Discharge volume (cc/1 stroke): 200 ●Maximum discharge lift (m): 2 ●Contact material ・Body/Nozzle: Steel (chrome-plated) ・Packing: PA ・Adapter: POM (φ40) *Does not come into contact with liquid *φ50 available as an option ●Weight (kg): 1.0 *For more details, please refer to the PDF document or feel free to contact us.

Quickly transfer low-viscosity liquids for oil, kerosene, diesel, and gasoline.

【Specifications (Excerpt)】 ●Collected materials: Oil, kerosene, light oil, gasoline ●Usable viscosity (cP): 4,000 ●Power source: Air ●Air consumption (L/min): 250 ●Recommended supply pressure (Mpa): 0.3 to 0.5 ●Maximum discharge capacity (L/min at 1cP): 40 ●Maximum discharge lift (m): 40 ●Suction lift (m): 2 ●Suction pipe outer diameter (Φ): 38 ●Contact material ・Main body: AL/SUS/BC ・Gasket: NBR/FKM/TPC-ET (Thermoplastic high polymer ether) ●Weight (kg): 5.6 *For more details, please refer to the PDF document or feel free to contact us.

Quickly transfer low-viscosity liquids for solvents.

【Specifications (Excerpt)】 ＜MH21NA-V＞ ●Recovered Material: Solvent *Limited to materials that do not corrode ●Usable Viscosity (cP): 100 ●Power Source: Air ●Air Consumption (L/min): 540 ●Recommended Supply Pressure (Mpa): 0.3 to 0.7 ●Maximum Discharge Rate (L/min at 1cP): 15 ●Maximum Discharge Head (m): 3 ●Suction Head (m): 2 ●Suction Pipe Outer Diameter (Φ): 32 ●Wetted Parts Material ・Main Body: PP/PVC ・Gasket: PTFE/FKM ●Weight (kg): 2.9 ＜MH316MA-V＞ ●Recovered Material: Solvent *Limited to materials that do not corrode ●Usable Viscosity (cP): 100 ●Power Source: Air ●Air Consumption (L/min): 540 ●Recommended Supply Pressure (Mpa): 0.3 to 0.7 ●Maximum Discharge Rate (L/min at 1cP): 20 ●Maximum Discharge Head (m): 4.2 ●Suction Head (m): 2 ●Suction Pipe Outer Diameter (Φ): 27.5 ●Wetted Parts Material ・Main Body: SUS316/PTFE ・Gasket: PTFE ●Weight (kg): 3.2 *For more details, please refer to the PDF document or feel free to contact us.

Quickly transfer low-viscosity liquids for solvents.

【Specifications (Excerpt)】 ＜MH21N-V＞ ●Recovered material: Solvent *Limited to those that do not damage the material ●Usable viscosity (cP): 100 ●Power source: 100V power supply ●Power (W)/Fuse (A): 156/2 ●Maximum discharge capacity (L/min at 1cP): 25 ●Maximum discharge head (m): 4.2 ●Suction head (m): 2 ●Suction pipe outer diameter (Φ): 32 ●Wetted part materials ・Main body: PP/PVC ・Gasket: PTFE/FKM ●Weight (kg): 2.3 ＜MH316M-V＞ ●Recovered material: Solvent *Limited to those that do not damage the material ●Usable viscosity (cP): 100 ●Power source: 100V power supply ●Power (W)/Fuse (A): 123/2.5 ●Maximum discharge capacity (L/min at 1cP): 30 ●Maximum discharge head (m): 5 (total head) ●Suction head (m): 5 (total head) ●Suction pipe outer diameter (Φ): 27.5 ●Wetted part materials ・Main body: SUS316/PTFE ・Gasket: PTFE ●Weight (kg): 3.8 *For more details, please refer to the PDF document or feel free to contact us.

Pulsation-free discharge during carrier movement! Due to high pressure, injection and spraying are also possible.

【Specifications (Excerpt)】 ＜APP-C-AL＞ ●Collected materials: Oil, kerosene, light diesel ●Usable viscosity (cP): 5,000 ●Discharge rate (1cP, no resistance / L/min): 50 ●Maximum discharge head (m): 30 ●Materials in contact with liquid ・Main body: Steel ・Liquid contact parts: AL/Bs ・Packing: NBR/FKM ●Weight (kg): 23.0 *For more details, please refer to the PDF document or feel free to contact us.

Easily dispense high-viscosity liquids from pails or drums for solvent use.

【Specifications (Excerpt)】 ●Collection material: Solvent *Limited to materials that do not corrode ●Usable viscosity (cP): 10,000 ●Discharge volume (cc/1 stroke): 200 ●Maximum discharge lift (m): 2 ●Wetted parts material ・Body/Nozzle: SUS304 (P-SX), SUS316 (P-SXT) ・Packing: PTFE ・Adapter: POM (φ40) *Does not come into contact with liquid *φ50 available as an option ●Weight (kg): 1.0 *For more details, please refer to the PDF document or feel free to contact us.

【For solvents / For liquids only】Collecting low-viscosity liquids into open pails.

【Specifications (Excerpt)】 ●Collection material: Solvent *Limited to materials that do not corrode ●Usable viscosity (cP): 1,000 ●Compatible open drum (optional): JIS standard 20L open drum / APPQO-OP *Optional item ●Air consumption (L/min): 105 ●Maximum suction volume (L/min): 75 ●Suction lift (m): 2 ●Wetted parts material ・Body/Nozzle: AL ・Packing: FKM/SUS ●Weight (kg): 3.4 *For more details, please refer to the PDF document or feel free to contact us.

【For kerosene and light oil / Liquid only】 Waste liquid recovery from 5 meters below the underground pit.

【Specifications (Excerpt)】 ●Collected substances: Kerosene, light oil ●Usable viscosity (cP): 5,000 ●Compatible drum (optional): APPQO-SK (SUS drum) *Optional item ●Air consumption (L/min): 525 ●Maximum suction volume (L/min): 80 ●Suction lift (m): 5 ●Contact material ・Body/Nozzle: AL ・Packing: NBR/PE ●Weight (kg): 4.9 *For more details, please refer to the PDF document or feel free to contact us.

For oil/liquid use: Waste liquid recovery from underground pits 5 meters deep.

【Specifications (Excerpt)】 ●Collection Item: Oil ●Usable Viscosity (cP): 5,000 ●Compatible Pail (Optional): APPQO-SK (SUS Pail) *Optional item ●Air Consumption (L/min): 525 ●Maximum Suction Rate (L/min): 80 ●Suction Lift (m): 5 ●Contact Material ・Body/Nozzle: AL ・Packing: NBR/PE ●Weight (kg): 4.9 *For more details, please refer to the PDF document or feel free to contact us.

For solvent/liquid only: Waste liquid recovery from 5 meters below the underground pit.

【Specifications (Excerpt)】 ●Collected material: Solvent *Limited to those that do not damage the material ●Usable viscosity (cP): 5,000 ●Compatible drum (optional): APPQO-SK (SUS drum) *Optional item ●Air consumption (L/min): 525 ●Maximum suction amount (L/min): 80 ●Suction lift (m): 5 ●Wetted parts material ・Body/Nozzle: AL ・Packing: FKM/PE ●Weight (kg): 4.9 *For more details, please refer to the PDF document or feel free to contact us.

Just by moving the handle up and down, you can transfer high-viscosity liquids.

【Specifications (Excerpt)】 <S-LX> ●Compatible Container: 200L Closed Drum (JIS Standard: Large Plug G2/Small Plug G3/4) ●Liquid Used: Solvent ●Compatible Viscosity (cP): 10,000 ●Discharge Volume (cc/1 Stroke): 600 ●Maximum Lifting Height (m): 2 ●Wetted Parts Material ・Main Body: SUS304/SUS303 (Adapter) ・Packing: PTFE ●Weight (kg): [S-LX] 1.9 [S-LXHS] 3.3 *For more details, please refer to the PDF document or feel free to contact us.

Just by moving the handle up and down, you can transfer high-viscosity liquids.

【Specifications (Excerpt)】 <S-L> ●Compatible Container: 200L Closed Drum (JIS Standard: Large Plug G2/Small Plug G3/4) ●Liquid Used: Oil, Kerosene, Diesel ●Compatible Viscosity (cP): 10,000 ●Discharge Volume (cc/1 Stroke): 600 ●Maximum Lifting Height (m): 2 ●Contact Parts Material ・Main Body: Steel/UPE Resin (Adapter) ・Packing: PA ●Weight (kg): [S-L] 1.8 [S-LH-1] 2.4 *For more details, please refer to the PDF document or feel free to contact us.

[For Oil] Hand-crank pump that performs exceptionally well even in emergencies! For transferring low-viscosity liquids.

【Specifications (Excerpt)】 ● Usable container: 200L closed drum (JIS standard: large plug G2 / small plug G3/4) ● Usable liquids: oil, kerosene, light diesel, A heavy oil ● Usable viscosity (cP): 500 ● Discharge volume (cc/1 stroke): 240 ● Maximum lift height (m): 2 ● Contact part materials ・Main body: FC cast iron / AL (adapter) ・Packing: NBR ● Weight (kg): 6.5 *For more details, please refer to the PDF document or feel free to contact us.

Ideal for sites where electricity is unavailable! Air diaphragm pump with stepless adjustment function.

【Specifications】 ■ADO-40 - Operating air pressure: 0.4 to 0.6 MPa - Air consumption: 133 L/min - Discharge amount: 40 L/min - Suction lift: 4 m - Delivery lift: 7 m - Threaded flange diameter: Rc1”1/2 - Usable viscosity: 5,000 cp or less - Weight: 8.8 kg ■ADO-50 - Operating air pressure: 0.4 to 0.6 MPa - Air consumption: 200 L/min - Discharge amount: 100 L/min - Suction lift: 4 m - Delivery lift: 7 m - Threaded flange diameter: Suction side: R2, Discharge side: Rc2 - Usable viscosity: 5,000 cp or less - Weight: 13.9 kg <Common> Operating liquids: Oil, kerosene, light oil, water *For more details, please refer to the PDF document or feel free to contact us.

High-speed drum vacuum cleaner capable of collecting large volumes, up to 200L.

【Specifications (Excerpt)】 ●Collected materials: Oil, cutting oil, waste, metal shavings (100μ or more, 1cm or less) ●Usable viscosity (cP): 3,000 ●Air consumption (L/min): 1,050 ●Recommended supply pressure (Mpa): 0.4 to 0.6 ●Maximum suction volume (L/min): 150 ●Suction lift (m): 2 ●Material of wetted parts ・Body/Nozzle: AL/SUS/SPHC ・Packing: NBR/CR rubber ●Weight (kg): 6.0 <Other Specifications> Top plate carrier for 200L drum (APPQOHP2-TC200) Top plate carrier for 100L drum (APPQOHP2-TC100) Top plate carrier for 200L drum set (APPQOHP2-DTC200) Top plate carrier for 100L drum set (APPQOHP2-DTC100) Top plate carrier for 50L drum set (APPQOHP2-DTC50) *For more details, please refer to the PDF document or feel free to contact us.

Portable electric handheld pump! High-speed transfer of kerosene and diesel.

【Specifications (Excerpt)】 <EVPH56-100> ●Type: Hose at both ends ●Liquid used: Kerosene, light oil ●Power supply (V): 100 (200V version also available) ●Current (A): 5.5 ●Rated (minutes): Continuous operation possible ●Discharge pressure (Mpa): 0.15 ●Maximum discharge volume (1cP/L/min): [EVPH56-100] 46 [EVPH-56ATN] 20 [EVPH-56K24] 35 [EVPH-56K24ATN] 20 ●Maximum lift height (m): 10 ●Suction lift height (m): 2 ●Weight (kg): [EVPH56-100] 12 [EVPH-56ATN] 13.4 [EVPH-56K24] 12.4 [EVPH-56K24ATN] 14.4 *For more details, please refer to the PDF document or feel free to contact us.

For transferring kerosene and light oil from a drum.

【Specifications (Excerpt)】 <FA-100ATN> ●Compatible Container: 200L Closed Drum (JIS Standard: Large Plug G2 / Small Plug G3/4) ●Liquid Used: Kerosene, Light Oil ●Power Supply (V): 100 ●Current (A): 1.8 ●Rated Time (min): 30 ●Discharge Pressure (Mpa): 0.07 ●Maximum Discharge Volume (1cP/L/min): [FA-100ATN/FA-100ATNK24] 17 [FA-100K24] 40 ●Maximum Lift Height (m): 7 ●Suction Lift Height (m): 2 ●Weight (kg): [FA-100ATN] 9.5 [FA-100ATNK24] 8.3 [FA-100K24] 9.9 *For more details, please refer to the PDF document or feel free to contact us.

[For kerosene and light oil / Pump only] Easy-to-carry electric handheld pump! High-speed transfer of kerosene and light oil.

<EVP56-100> ●Type: Pump only ●Liquid used: Kerosene, light oil ●Power supply (V): 100 (200V version also available) ●Current (A): 5.5 ●Rated (minutes): Continuous operation possible ●Discharge pressure (Mpa): 0.15 ●Maximum discharge capacity (1cP/L/min): 46 ●Maximum lift height (m): 10 ●Suction lift height (m): 2 ●Weight (kg): 7.4 *For more details, please refer to the PDF document or feel free to contact us.

Pursuing reasonable prices! For the transfer of hydrogen peroxide (30% concentration) and nitric acid (30% concentration).

【Specifications (Excerpt)】 ＜CHD-20HP＞ ●Compatible container: 200L closed drum (JIS standard: large plug G2 / small plug G3 / 4) ●Liquid used: solvent ●Compatible viscosity (cP): 100 ●Power supply (V): 100 ●Current (A): 1.7 ●Rated (minutes): Continuous operation possible ●Discharge pressure (Mpa): 0.05 ●Maximum discharge amount (1cP/L/min): [CHD-20HP/CHD-20HPV] 55 [CHD-20HPN] 30 ●Maximum lift height (m): 5 ●Suction lift height (m): 2 ●Weight (kg): [CHD-20HP] 4.0 [CHD-20HPV/CHD-20HPN] 5.0 *For more details, please refer to the PDF document or feel free to contact us.

Pursuing reasonable prices! For the transfer of hydrogen peroxide (30% concentration) and nitric acid (30% concentration)! Electric chemical drum pump.

【Specifications (Excerpt)】 ＜CHD-20PP＞ ●Compatible Container: 200L Closed Drum (JIS Standard: Large Plug G2/Small Plug G3/4) ●Liquid Used: Solvent ●Compatible Viscosity (cP): 100 ●Power Supply (V): 100 ●Current (A): 1.7 ●Rated (min): Continuous operation possible ●Discharge Pressure (Mpa): 0.05 ●Maximum Discharge Volume (1cP/L/min): [CHD-20PP/CHD-20PPV] 55 [CHD-20PPN] 30 ●Maximum Lift Height (m): 5 ●Suction Lift Height (m): 2 ●Weight (kg): [CHD-20PP] 2.5 [CHD-20PPV/CHD-20PPN] 2.7 *For more details, please refer to the PDF document or feel free to contact us.

Portable electric handheld pump! Suitable for transferring medium viscosity oil to high places.

【Specifications (Excerpt)】 <EVH-100/EVH-200/EVH-12> ●Fluid used: Oil ●Usable viscosity (cP): 2,500 ●Power supply (V): [EVH-100] 100 [EVH-200] Single-phase 200 [EVH-12] DC12 ●Current (A): [EVH-100] 10.5 [EVH-200] 4.5 [EVH-12] 35 ●Rated time (min): 20 ●Discharge pressure (Mpa): 0.45 ●Maximum discharge capacity (L/min at 1cP): 15 ●Maximum lift height (m): 30 ●Suction lift height (m): 6 ●Weight (kg): [EVH-100] 18.5 [EVH-200] 18 [EVH-12] 19.5 <EVH-100H> ●Fluid used: Oil ●Usable viscosity (cP): 1,000 ●Power supply (V): 100 ●Current (A): 10.5 ●Rated time (min): 20 ●Discharge pressure (Mpa): 0.21 ●Maximum discharge capacity (L/min at 1cP): 30 ●Maximum lift height (m): 15 ●Suction lift height (m): 6 ●Weight (kg): 19.5 *For more details, please refer to the PDF document or feel free to contact us.

An electric drum pump that is relatively suitable for high-viscosity oil and optimal for transferring to high places.

【Specifications (Excerpt)】 <EVD-100/EVD-200/EVD-12> ●Fluid used: Oil ●Usable viscosity (cP): 2,500 ●Power supply (V): [EVD-100] 100 [EVD-200] Single-phase 200 [EVD-12] DC12 ●Current (A): [EVD-100] 10.5 [EVD-200] 4.5 [EVD-12] 35 ●Rated time (min): 20 ●Discharge pressure (Mpa): 0.45 ●Maximum discharge amount (L/min at 1cP): 15 ●Maximum lift height (m): 30 ●Suction lift height (m): 6 ●Weight (kg): [EVD-100/200] 18 [EVD-12] 19 <EVD-100H> ●Fluid used: Oil ●Usable viscosity (cP): 1,000 ●Power supply (V): 100 ●Current (A): 10.5 ●Rated time (min): 20 ●Discharge pressure (Mpa): 0.21 ●Maximum discharge amount (L/min at 1cP): 30 ●Maximum lift height (m): 15 ●Suction lift height (m): 6 ●Weight (kg): 19 *For more details, please refer to the PDF document or feel free to contact us.

Portable electric handheld pump! Ideal for transferring high-viscosity oil and for use at high altitudes as an electric type.

【Specifications (Excerpt)】 <EV-100/EV-200/EV-12> ●Type: Pump unit ●Fluid used: Oil ●Usable viscosity (cP): 2,500 ●Power supply (V): [EV-100] 100 [EV-200] Single-phase 200 [EV-12] DC12 ●Current (A): [EV-100] 10.5 [EV-200] 4.5 [EV-12] 35 ●Rated (minutes): 20 ●Discharge pressure (Mpa): 0.45 ●Maximum discharge capacity (L/min at 1cP): 15 ●Maximum lift height (m): 30 ●Suction lift height (m): 6 ●Weight (kg): [EV-100] 13 [EV-200] 12.5 [EV-12] 14 <EV-100H> ●Type: Pump unit ●Fluid used: Oil ●Usable viscosity (cP): 1,000 ●Power supply (V): 100 ●Current (A): 10.5 ●Rated (minutes): 20 ●Discharge pressure (Mpa): 0.21 ●Maximum discharge capacity (L/min at 1cP): 30 ●Maximum lift height (m): 15 ●Suction lift height (m): 6 ●Weight (kg): 14 *For more details, please refer to the PDF document or feel free to contact us.

Radial piston type air-operated handy pump that can be used in explosion-proof areas and is easy to carry! For transferring liquids from tanks or drums such as kerosene and diesel.

【Specifications (Excerpt)】 ＜AMH1-20SUS＞ ●Motor drive method: Radial piston motor ●Pump method: Vane pump ●Type: Pump only ●Fluid used: Solvent ●Usable viscosity (cP): 2,000 ●Air consumption (L/min): 415 ●Maximum discharge (L/min at 1 cP): 32 ●Lift height (m): 15 ●Suction lift height (m): 5 ●Weight (kg): [AMH1-20SUS] 8.8 [AMH1D-20SUS] 18.6 *For more details, please refer to the PDF document or feel free to contact us.

Air-operated portable hand pump for solvents / pump unit and drum can, suitable for use in explosive areas.

【Specifications (Excerpt)】 ＜ACH-20SUS＞ ●Motor Drive Method: Vane Motor ●Pump Type: Centrifugal Pump ●Style: Pump Unit ●Liquid Used: Solvent ●Usable Viscosity (cP): 5 ●Air Consumption (L/min): 508 ●Maximum Discharge (L/min at 1cP): 50 ●Lift Height (m): 5 ●Suction Height (m): 2 ●Weight (kg): [ACH-20SUS] 6.4 [ACHD-20SUS] 14 *For more details, please refer to the PDF document or feel free to contact us.

Air-operated portable hand pump for kerosene and light oil, suitable for use in explosive areas, with both ends for drum cans and hoses.

【Specifications (Excerpt)】 <ACH-20AL> ● Motor Drive Method: Vane Motor ● Pump Type: Centrifugal Pump ● Style: Pump Only ● Liquid Used: Kerosene, Light Oil ● Usable Viscosity (cP): 5 ● Air Consumption (L/min): 508 ● Maximum Discharge (1cP/L/min): 50 ● Lift Height (m): 5 ● Suction Height (m): 2 ● Weight (kg): [ACH-20AL] 4.5 [ACHD-20AL] 10.7 [ACHH-20AL] 9.3 *For more details, please refer to the PDF document or feel free to contact us.

Collecting everything from cast iron powder to PET bottles. An environmentally friendly, manual cleaner that doesn't require electricity.

<Specifications> ■AJL550S - Capable of collecting waste up to 500ml PET bottles - Adjustable height for cleaning surface (floor) and brush - Compact and lightweight ■AJL750S - Capable of collecting waste up to 500ml PET bottles - Adjustable height for cleaning surface (floor) and brush ■AJL920S - Fine sand, debris, and processing shavings, etc. - Side brush

Make the work environment even more comfortable and convenient! 'Options'

For more details, please refer to the catalog or feel free to contact us.

Ideal for managing liquid levels.

<For Oil> Model: ZKT-D-OL / ZKT-P-OL Type: Drum / Pail Liquid Used: Oil Usable Viscosity (cP): 500 Connection Diameter: G2 / Mounting Can Outer Diameter Φ40.8 Dimensions (Φ×mm): 65×990 (L850) / 65×500 (L360) Connection Material: Body SUS304 PTFE Weight (kg): 1.3 / 0.9 <For Water> Model: ZKT-D-W / ZKT-P-W Type: Drum / Pail Liquid Used: Water Connection Diameter: G2 / Mounting Can Outer Diameter Φ40.8 Dimensions (Φ×mm): 65×990 (L850) / 65×500 (L360) Connection Material: Body SUS304 PTFE Weight (kg): 1.3 / 0.9 Model: E-C Type: Drum Liquid Used: Oil, Kerosene, Light Oil Usable Viscosity (cP): 500 Connection Diameter: G2 / G3/4 Dimensions (Φ×mm): 80×120 (Display Part) 22×300 (Float) Connection Material: Body PE/PP/ABS/Kevlar-based Weight (kg): 0.2

Ideal for liquid management! Used in combination with pumps for usage management (TB-K24 series) for managing the usage of kerosene, light oil, and oil (MK33 series).

For more details, please refer to the catalog or feel free to contact us.

It is convenient to attach it to the end of a hose when combined with an electric pump or air pump. The gun nozzle automatically stops when it is full.

For more details, please refer to the catalog or feel free to contact us.

It is convenient to attach it to the end of a hose when combined with an electric pump or an air pump.

<Specifications> - Usable liquid: Solvent - Operating pressure: 0.15 MPa or less - Weight: 1.3 kg

It is convenient to attach it to the end of a hose when combined with an electric pump or air pump.

<Specifications> - Usable liquids: Water, solvent, AdBlue - Operating pressure: 0.15 to 0.3 MPa or less - Weight: 0.2 to 0.5 kg

It is convenient to attach it to the end of a hose when combined with an electric pump or an air pump.

<Specifications> - Usable liquids: kerosene, light oil, gasoline, solvents, high-viscosity oil - Operating pressure: 0.15 to 1.0 MPa or less - Weight: 0.6 to 0.7 kg

Organization of the workspace and securing space (tabletop rack, single-tier rack, double-tier rack, riser)

*For more details, please refer to the catalog or feel free to contact us. *Please note that the products introduced in the video may have variations in specifications for the same model. *The products in the video are from the time of filming. Depending on the current time or sales period, the design and specifications of the products may differ. Thank you for your understanding.

For dispensing liquids from a drum. Simply insert into the small opening of the drum for air release.

<Specifications> - Can type: Drum can for air release - Weight: 240g

For dispensing liquids from a drum. A convenient faucet that can be used like a server.

<Specifications> Liquid used: Low viscosity solvent Mounting can opening (inches): G2 Flow path (Φ): 9.2 Valve diameter: 1/2 Weight (kg): 0.86

For dispensing liquids from pails and one-gallon cans. A convenient faucet that allows for easy pouring like a server.

<Specifications> Fluid used: High viscosity oil / solvent Mounting can mouth outer diameter (Φ): 40.8 (ND-40) / 48.8 (ND-50) Flow path (Φ): 40.0 Mass (kg): 0.76 (ND-40) / 0.68 (ND-50)

For dispensing liquids from pails and one-gallon cans. A convenient faucet that allows for easy dispensing like a server.

<Specifications> Liquid used: Low viscosity solvent Mounting can opening diameter (Φ): 40.8 (SP-L40) / 48.8 (SP-L50) Flow path diameter (Φ): 9.2 Valve diameter: 1/2 Weight (kg): 0.65 (SP-L40) / 0.76 (SP-L50)

For dispensing liquids from pails and one-gallon cans. A convenient faucet that allows for easy dispensing like a server.

<Specifications> Liquid used: Solvent

For dispensing liquids from pails and one-gallon cans. A convenient tap that allows for easy pouring like a server.

<Specifications> Fluid used: Medium viscosity oil

No need to puncture the can, pulsation-free and splash-proof barrel tap.

<Specifications> ■Model: PC-40PP ■Weight: 130g (Mounting part: 100g) ■Material: Body: PP Packing: NBR Tube: Polyurethane Float: Water and oil resistant resin ■Pail and drum size: 40 ■Usable liquids: Low viscosity liquids (General working oil, cutting oil, processing oil, machine oil, engine oil, water)

No oil supply required with lubricators. Uses a non-lubricated air motor.

<Specifications> Fan Diameter: 450φ Compressor Power: 3PS Operating Air Pressure: 0.4–0.6Mpa Air Consumption: 0.33m³/min Airflow: 250m³/min Rotation Speed: 1800rpm Material: Steel (body) Aluminum (blades) Size (mm): Width 510 × Depth 320 × Height 590 Weight: 7.2kg Swing Angle: Approximately 70 degrees Tilt Angle: 4 levels

No oil refilling is required with lubricators. Equipped with a maintenance-free air motor.

<Specifications> Fan diameter: 450φ Compressor horsepower: 3PS Operating air pressure: 0.4–0.6Mpa Air consumption: 0.33m³/min Airflow: 250m³/min Rotation speed: 1800rpm Material: Steel (body) Aluminum (blades) Size (mm): Width 510 × Depth 320 × Height 610 Weight: 7.0kg Swing: Approximately 70 degrees Tilt: 7 levels

No oil refilling required with lubricators. Uses a non-lubricated air motor.

<Specifications> Fan diameter: 450φ Compressor horsepower: 3PS Operating air pressure: 0.4–0.6Mpa Air consumption: 0.33m³/min Airflow: 250m³/min Rotation speed: 1800rpm Material: Steel (body) Aluminum (blades) Size (mm): Width 525 × Depth 536 × Height 792 Weight: 10.4kg Swing angle: Approximately 70 degrees Tilt angle: 7 levels

No oil supply required with lubricators. Uses a non-lubricated air motor.

<Specifications> Fan Diameter: 600φ Compressor Power: 5PS Operating Air Pressure: 0.4–0.6Mpa Air Consumption: 0.46㎥/min Airflow: 280㎥/min Rotation Speed: 1000rpm Material: Steel (body) Aluminum (blades) Size (mm): Width 870 × Depth 753 × Height 1365 Weight: 12.6kg Swing Angle: Approximately 55 degrees Tilt Angle: 4 levels

No oil supply required with lubricators. Equipped with a maintenance-free air motor.

<Specifications> Fan Diameter (Φ): 450 Compressor Power (PS): 3 Operating Air Pressure (Mpa): 0.4–0.6 Air Consumption (m3/min): 0.33 (= 333L/min) Airflow (m3/min): 250 Rotational Speed (rpm): 1800 Material (Body & Blades): Steel (Body) Aluminum (Blades) Size (mm): Width 780 × Depth 680 × Height 1210 Weight: 7.5 Swing Angle: Approximately 70 degrees Tilt Angle: 7 levels *Please note that the design, color, specifications, appearance, and price of the product in images and videos may change without notice.

No oil refilling required with lubricators; equipped with a maintenance-free air motor for powerful performance! Speedy ventilation!

Model: AFR-08NL Type: Axial flow Fan diameter (mm): 200 Compressor horsepower: 5 Operating air pressure (Mpa): 0.4–0.6 Air consumption (m3/min): 0.35 Maximum airflow (m3/min): 120 Maximum rotational speed (rpm): 3,300 Material (body & blades): Steel/Plastic Size (mm): Width 297 × Depth 337 × Height 312 Weight (kg): 7.7 Model: AFR-12NL Type: Axial flow Fan diameter (mm): 300 Compressor horsepower: 5 Operating air pressure (Mpa): 0.4–0.6 Air consumption (m3/min): 0.45 Maximum airflow (m3/min): 200 Maximum rotational speed (rpm): 2,800 Material (body & blades): Steel/Plastic Size (mm): Width 378 × Depth 362 × Height 3942 Weight (kg): 9.4

To manage usage so that we can know who supplied how much. The convenience of being able to take out only the necessary amount, like a stand.

<Specifications> Fluid used: AdBlue, water Drive method: Electric 100V Rated (minutes): 20 Maximum discharge capacity (at 1cP / L/min): 28 Maximum lift height (m): 6

Easily dispense AdBlue from an IBC container with a supply tank located at a high position.

<Specifications> Liquid used: AdBlue, water (For details, please refer to the catalog)

The supply tank is located at a high position, allowing AdBlue in the IBC container to be easily dispensed from the bottom of the IBC container by its own weight.

<Specifications> Liquid used: AdBlue, water (For details, please refer to the catalog) 《JEH Series》 JEH-AK3 (for AdBlue / 3m hose with coupler) JEH-AK5 (for AdBlue / 5m hose with coupler) JEH-BK3 (for AdBlue / 3m hose with screw type) JEH-BK5 (for AdBlue / 5m hose with screw type) JEH-AKA3 (for AdBlue / 3m hose with coupler) JEH-AKA5 (for AdBlue / 5m hose with coupler) JEH-BKA3 (for AdBlue / 3m hose with screw type) JEH-BKA5 (for AdBlue / 5m hose with screw type)

Convenient for supplying AdBlue in small quantities to cargo vehicles, construction machinery, agricultural machinery, and large vehicles.

<Specifications> Liquid used: AdBlue, water (For details, please refer to the catalog)

AdBlue for purifying diesel exhaust gases When you want to quickly portion out AdBlue from a resin drum.

<Specifications> Liquid used: AdBlue, water (For details, please refer to the catalog)

AdBlue for purifying diesel exhaust gases. When you want to quickly portion out AdBlue from a resin drum.

<Specifications> Liquid used: AdBlue, water (For details, please refer to the catalog)

Water absorption of 6m (2.5m when dry) with a performance of 15m in height. Made of aluminum, lightweight, and equipped with a manual water supply pump.

<Specifications> Liquid used: Water (For details, please refer to the catalog)

Suction depth of 6m (2.5m when dry) and a lift height of 15m. Usable in locations without power supply.

<Specifications> Fluid used: Oil (For details, please refer to the catalog) Usable viscosity: 5000 cP (varies by nozzle)

Pulsation-free discharge during carrier movement. Due to high pressure, injection and spraying are also possible.

<Specifications> Liquid to be used: Oil, kerosene, light oil, gasoline, solvent (For details, please refer to the catalog) Usable viscosity: 5000cP (varies by nozzle) Maximum discharge amount: 50ℓ/min (at viscosity 1cP, lift height 0m)

Quickly transfer low-viscosity liquids.

<Specifications> Liquid used: Solvent (For details, please refer to the catalog) Usable viscosity: 100cP (varies by nozzle) Maximum discharge rate: 15ℓ/min (at viscosity 1cP, lift height 0m)

Quickly transfer low-viscosity liquids.

<Specifications> Liquid used: Solvent (For details, please refer to the catalog) Usable viscosity: 1000cP (varies by nozzle) Maximum discharge rate: 25ℓ/min (at viscosity 1cP, lift height 0m) Power supply: 100V Lift height: 4.2m (clean water)

Easily portion high-viscosity liquids from pails or one-gallon cans.

<Specifications> Liquid to be used: Oil, kerosene, light oil, solvent (For details, please refer to the catalog) Usable viscosity: 10000cP (varies by nozzle) Maximum discharge volume: 200cc/1 stroke (at viscosity 1cP, lift height 0m) Lift height: 2m (clean water)

For the recovery of waste liquid from 5 meters below the underground pit.

<Specifications> Collection Item: Oil (For details, please refer to the catalog) Usable Viscosity: 5000cP (varies by nozzle) Maximum Discharge Rate: 80ℓ/min (at viscosity 1cP, lift height 0m) Compressor: 5 horsepower or more Lift Height: 2m (clean water)

Collect low-viscosity liquid into an open pail.

<Specifications> Collected materials: Oil, solvent (For details, please refer to the catalog) Usable viscosity: 1000cP (varies by nozzle) Maximum discharge rate: 75ℓ/min (at viscosity 1cP, lift height 0m) Compressor: 1 horsepower (0.75kW) or more Lift height: 2m (clean water)

Collect low-viscosity liquid into a closed pail.

<Specifications> Collected materials: Oil, kerosene, light oil, solvent (For details, please refer to the catalog) Usable viscosity: 1000cP (varies by nozzle) Maximum discharge rate: 60ℓ/min (at viscosity 1cP, lift 0m) Compressor: 1 horsepower (0.75kW) or more Lift: 2m (clean water)

A vacuum cleaner for collecting oil and metal shavings in a bucket. It is convenient for on-site cleaning as it can handle both dry and wet materials.

<Specifications> Model: APPQO600S Collected materials: Oil, cutting oil, waste, metal shavings (under 1cm) Compatible viscosity (cP): 3,000 Air consumption (L/min): 475 Recommended supply pressure (Mpa): 0.4 to 0.6 Maximum suction amount (L/min): 90 Suction lift (m): 2 Weight (kg): 3.9 <Accessories> Nozzle: Main nozzle (straight) Hose material: PVC (2m x φ32) <Contact parts material> Body/Nozzle: AL/SUS Packing: NBR (Optional) * Oil stopper (APPQO-OP) Prevention of liquid leakage when full: Ball material (PE) * Filter set: Required for dry use; cannot be installed without the oil stopper. Can collect dust larger than 100 microns and smaller than 1cm; cannot collect aluminum powder or similar materials that pose a risk of dust explosion. * Hose length can be changed. * Open drum can (APPQO-OP) * Carry for drum can (CARRY) * Top plate for mounting on 200L open drum (DTB) * Carry for 200L open drum (DC-NBR) * Not for use with materials that pose a risk of dust explosion or flammable liquids.

Transfer and portioning of kerosene and light oil contained in tanks and containers.

<Specifications> Fluid used: Oil, kerosene, light diesel (For details, please refer to the catalog) Usable viscosity: 500 cP (varies by nozzle) Maximum discharge amount: 200/1 stroke

A convenient system that combines a pump and a flow meter. The long-awaited flow meter integrated drum pump.

<Specifications> Fluid used: Kerosene, light oil (For details, please refer to the catalog) Usable viscosity: 100cP (varies by nozzle) Maximum discharge rate: 46ℓ/min (at viscosity 1cP, lift height 0m) Power supply: 100V Lift height: 2m (clean water)

A convenient system that combines a pump and a flow meter. The long-awaited flow meter integrated drum pump.

<Specifications> CUBE-70K Power Supply (V): 100 Current (A): 5.5 Fluid Used: Kerosene, Light Oil Maximum Discharge Pressure (Mpa): 0.13 Maximum Discharge Volume (L/min): 70 Lift Height (m): 8 Suction Height (m): 2 Hose Material Suction Side: Oil-resistant PVC (2m × Φ25) with Strainer Discharge Side: NBR (4m × Φ20) with Auto Stop Gun Solution Part Material Main Body: FC Packing: NBR/FKM Power Cord (m): 3 Weight (kg): 25

Just turn on the switch for easy use! A pump perfect for transferring kerosene and light oil!

<Specifications> Fluid used: Diesel fuel / Gasoline (For details, please refer to the catalog) Usable viscosity: 100 cP (varies by nozzle) Maximum discharge rate: 17 ℓ/min (at viscosity 1 cP, lift height 0 m) Power supply: 100V Lift height: 7 m (clean water)

A portable electric handheld pump. It is ideal for transferring relatively high-viscosity oil and for use at high elevations.

<Specifications> Fluid used: Oil (For details, please refer to the catalog) Usable viscosity: 2500cP Maximum discharge rate: 30ℓ/min (at viscosity 1cP, lift height 0m) Power supply: 100V, 200V, 12V Lift height: 15m (clean water) <Features> ● Three types of power supply: AC100V, 200V (single phase) and DC12V ● Rated for 30 minutes *Please be careful as the motor may burn out and cause failure ● Maximum lift height of 30m ● Available in a drum can type and hose connection type

High flow rate, high lift pressure-resistant explosion-proof motor pump. For the transfer and dispensing of flammable liquids.

<Specifications> Fluid used: Solvent (For details, please refer to the catalog) Usable viscosity: 50cP Maximum discharge rate: 40ℓ/min (at viscosity 1cP, lift height 0m) Power supply: 100V Lift height: 8m (clean water)

A pump suitable for transferring liquids with a viscosity of 20,000 cP or less! A high-lift pump with a discharge height of 50m (equivalent to ISO 1,000).

<Specifications> Usable container: 200L closed drum (JIS standard: large plug G2 / small plug G3/4) Pump type: Piston Liquid used: Solvent (For more details, please refer to the catalog) Usable viscosity: 20,000 cP Air consumption: 250 L/min Supply pressure: 0.3 to 0.8 MPa Maximum discharge rate (at 1 cP): 15 L/min Lift height: 50 m Suction height: 2 m Weight: 9.8 kg

Pump suitable for transferring liquids with a viscosity of 20,000 cP or less! High-lift pump with a discharge height of 50m (equivalent to ISO 1,000).

<Specifications> Usable container: 200L closed drum (JIS standard: large plug G2 / small plug G3/4) Pump type: Piston Liquid used: Oil (For details, please refer to the catalog) Usable viscosity: 20,000 cP Air consumption: 250 L/min Supply pressure: 0.3 to 0.8 MPa Maximum discharge rate (at 1 cP): 15 L/min Lifting height: 50 m Suction height: 2 m Weight: 9.4 kg

[For Solvents/Ball Valve with Gun Nozzle] For transferring alkaline solvents in areas where open flames are prohibited! An air-operated chemical drum pump designed with a focus on reasonable pricing.

<Specifications> Usable container: 200L closed drum (JIS standard: large plug G2 / small plug G3/4) Usable liquid: solvent (For details, please refer to the catalog) Usable viscosity: 100cP Air consumption: 235L/min (recommended supply pressure 0.3Mpa) Maximum discharge rate (at 1cP): [CHD-20AHP/CHD-20AHPV] 50L/min, [CHD-20AHPN] 25L/min Lifting height: 4m Weight: [CHD-20AHP] 4.0kg, [CHD-20AHPV/CHD-20AHPN] 5.0kg

Ideal for transferring liquids from oil drums! Switching between discharge and suction is easy with just one lever.

<Specifications> Usable Container: 200L Closed Drum (JIS Standard: Large Plug G2 / Small Plug G3/4) Usable Liquid: Oil (For details, please refer to the catalog) Usable Viscosity: 3,000 cP Function: Discharge and Suction Compatible Air Consumption: 167 L/min Maximum Suction Lift: 2m <Accessories> Nozzle: Straight Ball Valve Hose Material (Inner Diameter x Length): PVC Hose (Φ32 x 2m) Air Connection Port: Air Coupler Plug (Male) <Fluid Contact Materials> Main Body & Nozzle: AL/Bs/SUS Packing: NBR Weight: 4.3 kg 《Air Pressure Pump Mechanism》 This pump inserts reduced-pressure compressed air into the drum, changing the internal pressure of the drum to discharge and suction liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign substances or viscosities (up to 3,000 cP) without malfunction. Additionally, because it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included are not suitable for liquids with foreign substances.

Ideal for transferring liquids from drums for kerosene, light oil, and gasoline! Switching between discharge and suction is easy with just one lever.

<Specifications> Usable container: 200L closed drum (JIS standard: large plug G2 / small plug G3/4) Usable liquids: kerosene, light oil, gasoline (For details, please refer to the catalog) Usable viscosity: 3,000 cP Function: discharge and suction compatible Air consumption: 167 L/min Maximum suction lift: 2 m <Accessories> Nozzle: straight ball valve Hose material (inner diameter × length): NBR hose (Φ25 × 2 m) Air connection port: air coupler plug (male) Ground wire included <Material in contact with liquid> Main body and nozzle: AL/Bs/SUS Packing: NBR Weight: 5.7 kg 《Mechanism of Air Pressure Pump》 This is a pump that discharges and sucks liquid by inserting reduced pressure compressed air into the drum and changing the internal pressure of the drum. Since there are no obstacles in the flow path, it can handle liquids with foreign substances mixed in and liquids with viscosity (up to 3,000 cP) without malfunction. Additionally, since it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included are not suitable for liquids with foreign substances mixed in.

Ideal for transferring liquids from solvent drums! Switching between discharge and suction is easy with just one lever.

<Specifications> Usable container: 200L closed drum (JIS standard: large plug G2 / small plug G3/4) Usable liquid: solvent (For details, please refer to the catalog) Usable viscosity: 3,000 cP Function: Discharge and suction compatible Air consumption: 167L/min Suction lift: 2m Weight: 5.3kg 《Mechanism of Air Pressure Pump》 This is a pump that discharges and sucks liquid by inserting reduced pressure compressed air into the drum and changing the internal pressure of the drum. Since there are no obstacles in the flow path, it can handle liquids with foreign substances and liquids with viscosity (up to 3,000 cP) without failure. Additionally, since it is air-operated, it can be used in environments where there is a risk of ignition or explosion. *Flow meter and gun nozzle cannot have foreign substances mixed in. 《Mechanism of Air Pressure & Vacuum Pump》 This is a pump that can collect and discharge liquid from a closed drum. The collection uses the mechanism of the APDQ series, while the discharge uses the mechanism of the APD series. Switching is easily operated with a single lever. It is suitable for replacing cutting oil in machine tools, etc.

Collecting cutting fluids, waste oil, and solvents such as IPA, methanol, and toluene in drums.

<Specifications> Usable Container: 200L Closed Drum (JIS Standard: Large Plug G2 / Small Plug G3/4) Usable Liquid: Oil (For details, please refer to the catalog) Usable Viscosity: 3,000 cP Function: Suction only Air Consumption: 167 L/min Suction Lift: 2m Suction Amount (at 1 cP): 80 L/min Weight: 3.3 kg 《Mechanism of Air Pressure Pump》 This pump inserts reduced pressure compressed air into the drum, changing the internal pressure of the drum to discharge and suction liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign substances and viscosities (up to 3,000 cP) without failure. Additionally, because it is air-operated, it can be used with flammable or explosive liquids and in hazardous environments. *Flow meter and gun nozzle included; foreign substance contamination is not allowed. 《Mechanism of Air Vacuum Pump》 This pump collects various liquids such as kerosene, light oil, oil, and chemicals from closed drums. It can safely and efficiently collect without using electricity through an ejector mechanism. The collected drum can be handed directly to a waste disposal contractor. *For disposal methods, please contact your contractor.

Collecting cutting fluids, waste oil, and solvents such as kerosene, light oil, gasoline, IPA, methanol, and toluene in drums.

<Specifications> Usable container: 200L closed drum (JIS standard: large plug G2 / small plug G3/4) Usable liquids: kerosene, light oil, gasoline (For details, please refer to the catalog) Usable viscosity: 3,000 cP Function: Suction only Air consumption: 167L/min Suction lift: 2m Suction rate (at 1 cP): 50L/min Weight: 4.4kg <Mechanism of Air Pressure Pump> This is a pump that discharges and sucks liquid by inserting reduced-pressure compressed air into the drum and changing the internal pressure of the drum. Since there are no obstacles in the flow path, it can handle liquids with foreign substances or viscosities (up to 3,000 cP) without failure. Additionally, because it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle cannot be used with contaminated liquids. <Mechanism of Air Vacuum Pump> This is a pump that collects all kinds of liquids such as kerosene, light oil, oil, and chemicals from a closed drum. It can safely and efficiently collect without using electricity through an ejector mechanism. The collected drum can be handed directly to a waste disposal contractor. *For disposal methods, please contact your contractor.

Collecting cutting fluids, waste oil, and solvents such as IPA, methanol, and toluene in drums.

<Specifications> Usable container: 200L closed drum (JIS standard: large plug G2 / small plug G3/4) Usable liquid: solvent (For details, please refer to the catalog) Usable viscosity: 3,000 cP Function: Suction only Air consumption: 167 L/min Suction lift: 2 m Suction amount (at 1 cP): 50 L/min Weight: 4.0 kg 《Mechanism of Air Pressure Pump》 This is a pump that discharges and sucks liquid by inserting reduced pressure compressed air into the drum and changing the internal pressure of the drum. Since there are no obstacles in the flow path, it can handle liquids with foreign substances or viscosities (up to 3,000 cP) without failure. Additionally, because it is air-operated, it can be used in environments with flammable or explosive liquids. *Flow meter and gun nozzle cannot be used with foreign substances. 《Mechanism of Air Vacuum Pump》 This is a pump that collects all types of liquids such as kerosene, light oil, oil, and chemicals from a closed drum. It can safely and efficiently collect without using electricity through an ejector mechanism. The collected drum can be handed directly to a waste disposal contractor. *For disposal methods, please contact your contractor.

For transferring high-viscosity liquids in large volumes for solvents, acids, and alkalis! It is a separable air pressure pump that can be disassembled for cleaning.

<Specifications> Usable Container: 200L Closed Drum (JIS Standard: Large Plug G2/Small Plug G3/4) Sealed Pressurized Separate Type Liquid Used: Solvent Usable Viscosity: 4,000 cP Maximum Discharge Rate (at 1 cP): [APDS-25SUS] 70L/min, [APDS-32SUS] 130L/min Maximum Lift Height: 2m <Accessories> Nozzle: Ball Valve Hose Material: SUS Hose Hose (Inner Diameter × Length): [APDS-25SUS] Φ25×2m, [APDS-32SUS] Φ32×2m Ground Wire Included <Fluid Contact Parts Material> Main Body/Nozzle: SUS304 Packing: PTFE/FFKM Weight: [APDS-25SUS] 9.4kg, [APDS-32SUS] 11.5kg 《Air Pressure Pump Mechanism》 This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign substances or viscosities (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids or environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included are not suitable for liquids with foreign substances.

For oil: Large capacity transfer of high-viscosity liquids; disassembly and cleaning possible.

<Specifications> Model: APDS-32 Compatible Container: 200L Closed Drum (JIS Standard: Large Plug G2/Small Plug G3/4) Sealed Pressurized Separate Type (Pump and Pressurization Sections are Divided) Liquid Used: Oil Compatible Viscosity: 4,000 cP Maximum Discharge Rate (at 1 cP): 131 L/min Maximum Lift Height: 2 m <Accessories> Nozzle: Ball Valve Hose Material (Inner Diameter × Length): PVC Hose (Φ38 × 2 m) Air Connection Port: Air Coupler Plug (Male) <Materials in Contact with Liquid> Main Body/Nozzle: AL/Bs/SUS/CAC Packing: FKM/PTFE/NBR Weight: 9.7 kg 《Mechanism of Air Pressure Pump》 This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and suction liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign substances or viscosities (up to 3,000 cP) without failure. Additionally, because it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle cannot have foreign substances mixed in.

[Sanitary product / Heloor joint specification] For large-volume transfer of high-viscosity liquids! It is a separable air pressure pump that can be disassembled for cleaning.

<Specifications> Usable container: 200L closed drum (JIS standard: large plug G2 / small plug G3 / 4) sealed pressurized separate type (pump section and pressurization section are separated) Liquid used: Solvent Usable viscosity: 4,000 cP Maximum discharge rate (at 1 cP): [APDS-1s] 73L/min, [APDS-1.5s] 193L/min Maximum lift height: 2m <Accessories> Hose material: PP hose Hose (inner diameter × length): [APDS-1s] Φ25×1.2m, [APDS-1.5s] Φ38×1.2m <Contact part materials> Main body and nozzle: SUS (sanitary) Packing: PTFE/FFKM Weight: [APDS-1s] 6.2kg, [APDS-1.5s] 8.1kg 《Air Pressure Pump Mechanism》 This is a pump that discharges and sucks liquid by inserting reduced pressure compressed air into the drum and changing the internal pressure of the drum. Since there are no obstacles in the flow path, it can handle liquids with foreign substances or viscosities (up to 3,000 cP) without failure. Additionally, since it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign substance contamination is not allowed.

For transferring high-viscosity liquids in large volumes for acids and alkalis! It is a separable air pressure pump that can be disassembled for cleaning.

<Specifications> Usable Container: 200L Closed Drum (JIS Standard: Large Plug G2 / Small Plug G3/4) Sealed Pressurized Separate Type (Pump section and pressurization section are separated) Usable Liquid: Solvent (For details, please refer to the catalog) Usable Viscosity: 4,000 cP Maximum Discharge Rate (at 1 cP): 78 L/min Maximum Lifting Height: 2 m <Accessories> Hose Material: PP Hose Hose (Inner Diameter × Length): Φ25 × 1.2 m <Fluid Contact Parts Material> Main Body & Nozzle: PP Packing: PTFE/FFKM/EPDM/FKM Weight: 5 kg 《Air Pressure Pump Mechanism》 This pump inserts reduced pressure compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign substances and viscosities (up to 3,000 cP) without failure. Additionally, because it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign substance contamination is not allowed.

A pump that uses compressed air to utilize internal pressure for transfer, equipped with an oil gun nozzle! Minimizes residual liquid, energy-saving, and suitable for safely dispensing highly flammable liquids in small quantities.

<Specifications> Usable Container: 200L Closed Drum (JIS Standard: Large Plug G2/Small Plug G3/4) Sealed Pressurized Type Liquid to be Used: Oil Usable Viscosity: 3,000 cP Maximum Discharge Rate (at 1 cP): [APD-20N] 55L/min, [APD-25N] 80L/min Maximum Lift Height: 2m Accessories Nozzle: Manual Gun Hose Material: PVC Hose Hose (Inner Diameter × Length): [APD-20N] Φ25×2m, [APD-25N] Φ32×2m Air Connection Port: Air Coupler Plug (Male) Contact Parts Material Main Body & Nozzle: AL/Bs/SUS/CAC Packing: FKM/PTFE/NBR Weight: [APD-20N] 4.3kg, [APD-25N] 5.1kg *Specifications may change due to improvements. Please contact us for the latest specification details if needed.

A pump that uses compressed air to transfer liquids such as kerosene, light oil, and gasoline! It minimizes residual liquid, is energy-efficient, and safely dispenses highly flammable liquids in small quantities.

<Specifications> Usable container: 200L closed drum (JIS standard: large plug G2/small plug G3/4) sealed pressurized type Usable liquids: kerosene, light oil, gasoline Usable viscosity: 3,000 cP Maximum discharge rate (at 1 cP): [APD-20G] 55L/min, [APD-25G] 115L/min Maximum lift height: 2m Accessories Nozzle: ball valve Hose material: NBR hose Hose (inner diameter × length): [APD-20G] Φ19×2m, [APD-25G] Φ25×2m Air connection port: air coupler plug (male) Contact part materials Main body & nozzle: AL/Bs/SUS/CAC Packing: FKM/PTFE Weight: [APD-20G] 6.4kg, [APD-25G] 8.8kg *Specifications may change due to improvements. Please contact us if you need to confirm the latest specification details.

A pump that uses compressed air to transfer liquids by utilizing internal pressure! It minimizes residual liquid, is energy-efficient, and is suitable for safely dispensing highly flammable liquids.

<Specifications> Usable container: 200L closed drum (JIS standard: large plug G2 / small plug G3/4) sealed pressurized type Liquid to be used: Solvent Usable viscosity (at 1cP): 3,000cP Maximum discharge rate: [APD-20AS] 35L/min, [APD-25AS] 115L/min Maximum lift height: 2m <Accessories> Nozzle: Ball valve Hose material: SUS304 hose Hose (inner diameter × length): [APD-20AS] Φ19×2m, [APD-25AS] Φ25×2m Air connection port: Air coupler plug (male) <Materials in contact with liquid> Main body & nozzle: AL/Bs/SUS/CAC Packing: PTFE/FKM/FFKM with EPDM packing* Weight: [APD-20AS] 6.3kg, [APD-25AS] 8.5kg *Specifications may change due to improvements. Please contact us if you need to confirm the latest specification details. *For solvents such as acetone and MEK, please change the standard fluororubber packing to the included EPDM packing for use.

A pump that uses compressed air to transfer liquids by utilizing internal pressure! It minimizes residual liquid, is energy-efficient, and is suitable for safely dispensing highly flammable liquids in small quantities.

<Specifications> Fluid used: Solvent (For details, please refer to the catalog) Usable viscosity: 3,000 cP Maximum discharge rate (at 1 cP): [APD-20SUS] 40L/min, [APD-20SUSN] 35L/min Maximum lift height: 2m Accessories: Nozzle [APD-20SUS] ball valve, [APD-20SUSN] manual gun Hose material: SUS hose (Φ19×2m) Air connection port: Air coupler plug (male) Wetted parts material: [Body/Nozzle] SUS304, [Packing] PTFE/FFKM Weight: [APD-20SUS] 7.8kg, [APD-20SUSN] 7.6kg

A pump that uses internal pressure with compressed air for transferring liquids, equipped with a solvent nozzle! Minimizes residual liquid, energy-efficient, and suitable for safely dispensing highly flammable liquids.

<Specifications> Fluid used: Solvent (For details, please refer to the catalog) Usable viscosity: 3,000 cP Maximum discharge rate (at 1 cP): [APD-20ASN] 30L/min, [APD-25ASN] 70L/min Maximum lift height: 2m <Accessories> Nozzle: Manual gun Hose material: SUS hose Hose (inner diameter × length): [APD-20ASN] Φ19×2m, [APD-25ASN] Φ25×2m Air connection port: Air coupler plug (male) Fluid contact materials: [Body・Nozzle] AL/Bs/SUS/CAC, [Packing] PTFE/FKM/FFKM with EPDM packing* Weight: [APD-20ASN] 6.2kg, [APD-25ASN] 8.4kg

Pump for kerosene, light oil, and gasoline with a gun nozzle! Utilizes internal pressure with compressed air for transfer! Minimizes residual liquid, energy-saving, and safely allows for portioning of highly flammable liquids.

<Specifications> Usable Container: 200L Closed Drum (JIS Standard: Large Plug G2/Small Plug G3/4) Sealed Pressure Type Usable Liquids: Kerosene, Light Oil, Gasoline Usable Viscosity: 3,000 cP Maximum Discharge Rate (at 1 cP): [APD-20GN] 50L/min, [APD-25GN] 70L/min Maximum Lifting Height: 2m Accessories Nozzle: Manual Gun Hose Material: NBR Hose Hose (Inner Diameter × Length): [APD-20G] Φ19×2m, [APD-25G] Φ25×2m Air Connection Port: Air Coupler Plug (Male) Liquid Contact Materials Body & Nozzle: AL/Bs/SUS/CAC Packing: FKM/PTFE/NBR Weight: [APD-20GN] 6.3kg, [APD-25GN] 8.3kg *Specifications may change due to improvements. Please contact us if you need to confirm the latest specification details.

A pump that uses compressed air to transfer liquids by utilizing internal pressure! Minimizes residual liquid, energy-efficient, and suitable for safely dispensing highly flammable liquids.

<Specifications> Usable container: 200L closed drum (JIS standard: large plug G2 / small plug G3 / 4) sealed pressurized type Liquid to be used: Oil Usable viscosity: 3,000 cP Maximum discharge rate (at 1 cP): [APD-20] 65L/min, [APD-25] 150L/min Maximum lift height: 2m Accessories Nozzle: Ball valve Hose material: PVC hose Hose (inner diameter × length): [APD-20] Φ25 × 2m, [APD-25] Φ32 × 2m Air connection port: Air coupler plug (male) Contact part materials Body & nozzle: AL/Bs/SUS/CAC Packing: FKM/PTFE Weight: [APD-20] 4.4kg, [APD-25] 5.6kg *Specifications may change due to improvements. Please contact us if you need to confirm the latest specification details.

A chemical pump that pursues reasonable pricing. For the transfer of dilute sulfuric acid and alkaline solvents in fire-restricted areas.

<Specifications> Product: Chemical Pump Liquid Used: Solvent (For details, please refer to the catalog) Usable Viscosity: 100 cP Maximum Discharge Rate: 20 L/min (at viscosity 1 cP and lift 0 m) Compressor: 5 horsepower or more Lift: 3.5 m (clean water)

Chemical plants, aircraft factories, shipyards, painting booths. For ventilation, air supply, and cooling of machinery in plants and explosion-proof areas, etc.

<Specifications> - Fan diameter: 200 to 600 mm - Weight: 7.7 to 21.8 kg - Operating air pressure: 0.4 to 0.6 MPa - Compressor: 2 to 5 horsepower or more <Applications> Not only for factories such as chemical plants, painting factories, automobile transport ships, and shipyards, but also for various applications such as tunnel construction, ventilation for underground LP gas tanks, explosion-proof fans, and installation in manholes on ships and decks.

Ideal for transferring fuel to heavy machinery and agricultural equipment! Fuel can be quickly and safely supplied at the work site!

<PIUSIBOX BASIC 12V> Liquid used: Kerosene, light oil Maximum discharge rate: 45L/min Power source: DC12V Power consumption: 400W Rated: 30 minutes <Accessories> Discharge hose: 4m Suction hose: 2m Manual gun nozzle Foot valve Size: 400×300×420mm Weight: 9.5kg <PIUSIBOX PRO 12V> Liquid used: Kerosene, light oil Maximum discharge rate: 43L/min Power source: DC12V Power consumption: 620W Rated: 30 minutes <Accessories> Discharge hose: 4m Suction hose: 2m Filter Cartridge 10μ Manual gun nozzle Foot valve Size: 400×300×420mm Weight: 12kg

Hand-cranked pump that performs exceptionally well even in emergencies. For transferring low-viscosity liquids and gasoline.

<Specifications> Liquid to be used: Oil, kerosene, light oil, gasoline (For details, please refer to the catalog) Usable viscosity: 500cP (varies by nozzle) Maximum discharge amount: 240cc/1 stroke

Options for air-operated axial flow factory fans and blowers.

<Specifications> - D-08 (Duct 08) Operating fan: Dedicated to AFR-08NL Inner diameter: φ230 Weight (kg): 3.8 - D-12 (Duct 12) Operating fan: Dedicated to AFR-12NL Inner diameter: φ320 Weight (kg): 6 - D-18 (Duct 18) Operating fan: Dedicated to AFR-18 and 18NL Inner diameter: φ500 Weight (kg): 8 - D-24 (Duct 24) Operating fan: Dedicated to AFR-24 Inner diameter: φ630 Weight (kg): 10.8 - D-08V (Duct 08) Operating fan: Dedicated to AFR-08NL Inner diameter: φ200 Weight (kg): 2.3 - D-12V (Duct 12) Operating fan: Dedicated to AFR-12NL Inner diameter: φ300 Weight (kg): 3.3 - D-18 (Duct 18) Operating fan: Dedicated to AFR-18 and 18NL Inner diameter: φ600 Weight (kg): 7.8

The air device you have can be operated at your feet. Foot switch for retrofitting, simply step on it to turn it on and off.

This is a single switch sale (for retrofitting). The cleaner is not included. Compatible models: APPQO550(400/600), AVC-550SUS, APPQO-HP2, APPQO-CY25(32)

The air device you have can be operated "at hand."

This is a single switch sale (for retrofitting). The cleaner is not included. Compatible models: APPQO550(600), AVC-550SUS, APPQO-CY32 *For APPQO400, APPQO-CY25, APPQO-H, and APPQO, use SWA4.

Oil-free air motor factory fan AFF-18NL AFG-18NL! Usable in explosion-proof areas! Air blowing, cooling, ventilation, and heatstroke prevention in fire hazard areas!

■ Oil-free air motor factory fan ＜AFF-18NL (floor type) / AFG-18NL (stand type)＞ Blade diameter (cm): 45 Compressor horsepower (PS): 3 Operating air pressure (Mpa): 0.4–0.6 Air consumption (m3/min): 0.33 Airflow (m3/min): 250 Rotational speed (rpm): 1800 Material (body and blades): Steel (body) Aluminum (blades) Weight: 10.4 (AFF-18NL) / 9.7 (AFG-18NL) Other lineup * Please refer to the general catalog for specifications * Please contact us ＜AFG Series＞ ■ Air motor stand type blower AFG-18 (*AFD-18) / 24 ＜AFR Series＞ ■ Air motor axial flow blower AFR-08, AFR-12, AFR-18, AFR-24 ＜AFW Series＞ ■ Air motor wall-mounted blower AFW-18, AFW-24

Solve the problems of tank cleaning for machine tools and the recovery of cutting fluids and chips! A document summarizing product features is available.

Aqua System, as a manufacturer specializing in pumps, produces equipment that meets a wide variety of needs related to "liquid management" in factories, ranging from diesel and oil to chemicals and food. In addition to the products introduced this time, we have a large lineup available. Please feel free to contact us.

Solve the problems of tank cleaning for work machines and the recovery of cutting fluids and chips! A document summarizing product features is available.

Aqua System, as a manufacturer specializing in pumps, produces equipment that meets a wide variety of needs related to "liquid management" in factories, ranging from diesel and oil to chemicals and food. In addition to the products introduced this time, we have a large lineup available. Please feel free to contact us.

Solve the problems of tank cleaning for machine tools and the recovery of cutting fluids and chips! A document summarizing product features is available.

Aqua System, as a manufacturer specializing in pumps, produces equipment that meets a wide variety of needs related to "liquid management" in factories, ranging from diesel and oil to chemicals and food. In addition to the products introduced this time, we have a large lineup available. Please feel free to contact us.

Reduce downtime by cleaning the cutting fluid tank! Easy collection and disposal. Continuous operation is OK. J-F series, APDQO series.

**J-F Series** ■ J-FS・J-FF Air consumption during suction: 230L/min Suction lift: 4m Dust collection capacity: 10L Maximum discharge volume: 60L/min Maximum suction volume: 60L/min Maximum vacuum pressure: 14kPa Weight: 36kg Included Nozzle: Straight pipe Hose: Discharge side PVC (1.5m × φ32) Suction side reinforced PVC (3m × φ25) **APDQO-F Series** ■ APDQO-FS・APDQO-FF Air consumption during suction: 690L/min Suction lift: 2.5m Dust collection capacity: 180L Maximum discharge volume: 140L/min Maximum suction volume: 130L/min (supply air hose diameter φ6.5)・160L/min (supply air hose diameter φ12) Maximum vacuum pressure: 25kPa Weight: 32.5kg ■ APDQO-FS100・APDQO-FF100 Air consumption during suction: 320L/min Suction lift: 2.5m Dust collection capacity: 100L Maximum discharge volume: 140L/min Maximum suction volume: 100L/min (supply air hose diameter φ6.5)・120L/min (supply air hose diameter φ12) Maximum vacuum pressure: 26kPa Weight: 30.5kg

No electricity required, no hassle of oil refilling, and can be used in explosion-proof areas. Ideal for blowing, cooling, and ventilation in fire hazard zones, as well as for heatstroke prevention! *Video available.

Many other factory fans (blowers)! ■ Stand Type (AFG Series) Equipped with a standard oscillation function that allows for 90-degree left and right movement, making it possible to deliver air over a wide area. ■ Table Type (AFD Series) Can be placed in any available space! An extremely user-friendly tabletop factory fan. ■ Axial Flow Type (AFR Series) Ideal for ventilation and air blowing in narrow spaces such as manholes and tanks! Recommended for areas where ventilation is difficult. ■ Wall-Mounted Type (AFW Series) Convenient due to its wall-mounted design; this type of factory fan can be used without obstructing your feet or hands. Hanging the air hose on the wall also helps prevent cluttered wiring on-site. *For more details, please download the catalog or feel free to contact us!

Transporting hardened oil is a breeze! Jacket heaters that fit perfectly around containers, and more.

We also sell products that are effective for cleaning machines in factories and workspaces. 【Products for Cleaning Applications】 - Air-operated vacuum cleaner set - Air-operated vacuum cleaner - Tank cleaning filtration cleaner - Filtration cleaner for machine tools (circulation type) *We are currently offering materials that introduce our products. Please feel free to contact us for inquiries.