Report on Participation in the 1st Explosion-Proof and Disaster Prevention Risk Management Exhibition INCHEM TOKYO 2019

HIGUCHI INC.

We exhibited at the "1st Explosive and Disaster Risk Management Exhibition INCHEM TOKYO 2019." During the event, many people participated in both the seminars and the booth, and we were able to conclude it successfully. We sincerely thank everyone who visited us. If you have any questions regarding the seminars or other products, we would appreciate it if you could contact our sales representative or reach out to us using the information below. We look forward to your continued support. ▼ Information on the seminars held Safe Handling of Toxic Substances in Plants In chemical plants, it is necessary to handle various substances, each with different levels of toxicity and quantities. The seminar explained methods to mitigate exposure throughout a series of processes, from charging the reaction vessel to packaging the final product. Dust Explosion Countermeasures in Plants We provided explanations on explosion countermeasures in chemical plants, including the introduction of powders into reactors containing flammable gases and the handling of powders with dust explosion risks, based on reference flows. *For detailed information, please contact us.

Date and time Wednesday, Nov 20, 2019 ～ Friday, Nov 22, 2019
Capital Makuhari Messe
Entry fee Charge

Related product information

High-activity powder liner binding tool "Safe Seal Clip"
Double tie and cutting work can be easily performed by one person.

Containment capability of OEL < 1 μg/m³! The Safe Seal Clamp is a clip that efficiently binds and cuts tubular plastic bags. It has containment performance at the OEB 5 level! It can also be used for discharge ports of isolators. Reliable binding and cutting is possible with dedicated tools!
Tank truck grounding confirmation system!
Is the tank truck properly grounded? The Earth-Rite RTR can guarantee that it is properly grounded!

Earth-Rite RTR will not release the interlock if the ground wire is connected to a location other than the correct grounding point of the tank truck. Even if it is connected to the correct grounding point of the tank truck, if the ground wire becomes disconnected or the alligator clip comes off during liquid transport, the interlock will immediately activate. The interlock will also function if there is a problem on the grounding equipment side. It prevents ignition or explosion accidents caused by static electricity, which would not occur as long as grounding is reliably established.
Flexible Joint for Powder (Piping) ConnflexⓇ
Ideal for installation and design in chemical plants! Flexibly connect the discharge and intake sections in powder transport, with customizable sizes and materials.

FDA certified / GMP compliant. Compatible with ATEX zones 0, 1, 2, and 20, 21, and 22. Heat resistant: 205°C.
[Static Electricity Countermeasures] Grounding Confirmation Device for Charged Liquids (such as drums)
Metallic bodies with electrical conductivity can be grounded with Earth-Rite PLUS!

The universal grounding clamp with an easily connectable two-core cable is also easy to handle. *The length of the cable can be specified as an option. Grounding completion is indicated by the flashing green LED lamp. The lamp shows that it detects a grounding resistance value of 10 ohms or more.
Combining necessary functions is possible! Inline liquid sampling valve!
Sampling is possible from various piping conditions such as pressurized states and high-temperature states without changing the physical properties of the liquid!

Material: SUS (316L, 304), Hastelloy, Monel, Tantalum, Titanium, Zirconium, Stellite, PFA lining, etc. Operating temperature: -40 to 350°C (-40 to 660°F) Operating pressure: Vacuum side up to 16 MPa Please consult us for other sizes, materials, etc.! Available for both horizontal and vertical piping.
Realizing the preparation of powders and tablets in a sealed system 'Safeport Bag'
Adopts a specially designed port, allowing installation over the sealed liner! A containment-compatible single-use chute (bag)!

Swiss company LUGAIA has developed a new concept of single-use shoot (bag) in collaboration with a major pharmaceutical company. The use of dedicated crimping and specialized tools allows for efficient bonding and cutting of the liner.
Ideal for containing small amounts of powder and material handling! 'Transfer Bag'
Ideal for handling small amounts of powder! Single-use liner bag!

Please consult us regarding the material of the liner section and the shape of the back and connection parts. It is also possible to add handles for easier handling.
Sampling from the reaction vessel in a closed system! Reactor sampling!
No need to open the manhole for sampling from the reaction tank! Sampling can be done while containing the conditions inside the tank!

Optiflow: Basic model for reactor sampling. Actiflow: Mid-class model. Options such as heating jackets can be installed. DeepFlow: High-class model. Like Actiflow, options can be installed. Only this model can be produced with SUS + PFA coating.
Safe sampling of substances like hydrofluoric acid and sulfuric acid! Sampling valve for liquids.
It is possible to sample liquids without changing their physical properties while preventing foreign matter contamination. No need to open the manhole for sampling from the reaction vessel!

Material: SUS (316L, 304), Hastelloy, Monel, Tantalum, Titanium, Zirconium, Stellite, PFA lining, etc. Operating temperature: -40 to 350°C (-40 to 660°F) Operating pressure: Vacuum side up to 16 MPa Please consult us for other sizes, materials, etc.!
Liquid sampling system (sampling liquid within piping in a closed system)
Sampling is possible from piping under high temperature and pressure, as well as from reaction vessels during reactions! Oxidation risks and toxic liquids are also acceptable!

**Features** ◎ Inline Sampling Valve ■ Accessories with necessary functions can be selected according to the properties of the liquid (nitrogen replacement, accessories for high-temperature liquids, etc.) ■ A wide variety of connection options to match factory piping (JIS flange, ferrule connection, etc.) ■ Structure that leaves very little liquid residue ■ Heat jackets can also be installed ◎ Reactor Sampling ■ Liquid being reacted can be sampled from the reactor without opening the manhole ■ Operates using only compressed air without an electric pump, making it suitable for use in explosion-proof areas ■ Accessories with necessary functions can be selected according to the properties of the liquid (nitrogen replacement, accessories for high-temperature liquids, etc.) ■ Liquid continuously circulates through the flow path during operation *For more details, please download the catalog or contact us.*