We will be exhibiting at the INCHEM TOKYO 2021, the 34th Plant Show.

HIGUCHI INC.

We will be exhibiting at the 34th Plant Show held at INCHEM TOKYO 2021. During the event, we will hold a seminar at the venue, so please be sure to stop by when you visit. We sincerely look forward to your attendance. ● Exhibition Information 【Booth Number】S2-E08 Entry is "completely pre-registration only." Please make sure to register as a visitor before attending (admission is free). (Link: https://www.jma-onlineservice.com/11all/jp_inchem/) ● Seminar Information 【Date and Time】November 17 (Wednesday) 12:50–13:20 【Venue】Exhibitor Seminar Room in Hall South 1 【Seminar Content】 "Handling Toxic Powders and Powders That Should Not Be Exposed to the Atmosphere" Tasks such as incorporating toxic powders into equipment or packaging them are very challenging as they can easily lead to exposure. How can we perform these tasks safely (protecting workers and preventing dust explosions) and efficiently? We will address this issue. 【Participation Fee and Method】 The participation fee is free, with a capacity of 70 people, and pre-registration is required via the website. (If there are available seats, attendance on the day is possible.)

Date and time Wednesday, Nov 17, 2021 ～ Friday, Nov 19, 2021
10:00 AM ～ 05:00 PM
Capital Tokyo Big Sight South Exhibition Hall
Entry fee Free Attendance at this exhibition is "completely by prior registration." Please be sure to register as a visitor before attending.

Related product information

Flexible Joint for Powder (Piping) ConnflexⓇ
Ideal for installation and design in chemical plants! Flexibly connect the discharge and intake sections in powder transport, with customizable sizes and materials.

FDA certified / GMP compliant. Compatible with ATEX zones 0, 1, 2, and 20, 21, and 22. Heat resistant: 205°C.
Dust Explosion Countermeasures! Earth Monitoring System for FIBC Bags
Monitor the resistance of Type C bags with Earth-RiteⓇ FIBC to eliminate the risk of electrostatic disasters!

- Built-in LED (Green and red LEDs indicate normal and abnormal status) - Continuous loop monitoring (Monitors the resistance of the electrostatic dispersion loop) - Compact and easy to install 【Main Applications】 - Pharmaceuticals and pharmaceutical intermediates - Chemicals and organic chemicals - Batteries - Pesticides - Cosmetics
Grounding (Earthing) Monitoring System in Chemical Plants
The earth monitoring system can prevent serious disasters caused by human error by monitoring the status of up to 8 grounding points.

Even if there are areas where grounding has not been performed, the indicators make it easy to identify those areas, allowing for quick recovery work. Additionally, this Earth-RiteⓇ series includes the [Earth-RiteⓇFIBC] for Type C flexible containers. It continuously monitors the resistance of the Type C bag in use and notifies the operator of danger if the resistance value exceeds 10MΩ (or 100MΩ, which can be selected).
Safe sampling of substances like hydrofluoric acid and sulfuric acid! Sampling valve for liquids.
It is possible to sample liquids without changing their physical properties while preventing foreign matter contamination. No need to open the manhole for sampling from the reaction vessel!

Material: SUS (316L, 304), Hastelloy, Monel, Tantalum, Titanium, Zirconium, Stellite, PFA lining, etc. Operating temperature: -40 to 350°C (-40 to 660°F) Operating pressure: Vacuum side up to 16 MPa Please consult us for other sizes, materials, etc.!
Tank truck grounding confirmation system!
Is the tank truck properly grounded? The Earth-Rite RTR can guarantee that it is properly grounded!

Earth-Rite RTR will not release the interlock if the ground wire is connected to a location other than the correct grounding point of the tank truck. Even if it is connected to the correct grounding point of the tank truck, if the ground wire becomes disconnected or the alligator clip comes off during liquid transport, the interlock will immediately activate. The interlock will also function if there is a problem on the grounding equipment side. It prevents ignition or explosion accidents caused by static electricity, which would not occur as long as grounding is reliably established.
Combining necessary functions is possible! Inline liquid sampling valve!
Sampling is possible from various piping conditions such as pressurized states and high-temperature states without changing the physical properties of the liquid!

Material: SUS (316L, 304), Hastelloy, Monel, Tantalum, Titanium, Zirconium, Stellite, PFA lining, etc. Operating temperature: -40 to 350°C (-40 to 660°F) Operating pressure: Vacuum side up to 16 MPa Please consult us for other sizes, materials, etc.! Available for both horizontal and vertical piping.
Liquid sampling system (sampling liquid within piping in a closed system)
Sampling is possible from piping under high temperature and pressure, as well as from reaction vessels during reactions! Oxidation risks and toxic liquids are also acceptable!

**Features** ◎ Inline Sampling Valve ■ Accessories with necessary functions can be selected according to the properties of the liquid (nitrogen replacement, accessories for high-temperature liquids, etc.) ■ A wide variety of connection options to match factory piping (JIS flange, ferrule connection, etc.) ■ Structure that leaves very little liquid residue ■ Heat jackets can also be installed ◎ Reactor Sampling ■ Liquid being reacted can be sampled from the reactor without opening the manhole ■ Operates using only compressed air without an electric pump, making it suitable for use in explosion-proof areas ■ Accessories with necessary functions can be selected according to the properties of the liquid (nitrogen replacement, accessories for high-temperature liquids, etc.) ■ Liquid continuously circulates through the flow path during operation *For more details, please download the catalog or contact us.*
[Static Electricity Countermeasures] Grounding Confirmation Device for Charged Liquids (such as drums)
Metallic bodies with electrical conductivity can be grounded with Earth-Rite PLUS!

The universal grounding clamp with an easily connectable two-core cable is also easy to handle. *The length of the cable can be specified as an option. Grounding completion is indicated by the flashing green LED lamp. The lamp shows that it detects a grounding resistance value of 10 ohms or more.
Sampling from the reaction vessel in a closed system! Reactor sampling!
No need to open the manhole for sampling from the reaction tank! Sampling can be done while containing the conditions inside the tank!

Optiflow: Basic model for reactor sampling. Actiflow: Mid-class model. Options such as heating jackets can be installed. DeepFlow: High-class model. Like Actiflow, options can be installed. Only this model can be produced with SUS + PFA coating.