Analysis of mica sheet adhesive components using GC/MS.

アイテス

This is an introduction to the analysis of adhesive components in mica sheets using GC/MS. To investigate what components are contained in the mica sheets, spectroscopic measurements were conducted, suggesting that silicone-based adhesives are used. To determine the composition of the silicone-based adhesive, GC/MS measurements were performed. It was found that pentacyclooctasiloxane is used, and it was also discovered that dibutyl phthalate is added as a plasticizer and linear saturated hydrocarbons such as tridecane are added as lubricants.

Date and time
Capital
Entry fee

Related product information

Analysis of mica sheet adhesive components using GC/MS.
It is possible to investigate components that cannot be identified by spectroscopy alone, as well as trace additives that cannot be detected!

For more details, please refer to the PDF document or feel free to contact us.
GCMS analysis of liquid crystal components
Comparison of components in liquid crystal panels using gas chromatography-mass spectrometry (GC-MS) is published!

For more details, please refer to the PDF document or feel free to contact us.
Identification of natural components by GCMS
Focusing on sandalwood (Byakudan), which is used as a raw material for incense! Here is an example of component analysis using GC-MS.

【Ingredients of Incense B】 ■ Bugdanol: Present ■ Cedrol: Present ■ α-Santalol: Absent ■ β-Santalol: Absent *For more details, please refer to the PDF document or feel free to contact us.
Analysis of impurities in organic solvents
The aldol reaction progresses under the influence of temperature, humidity, and light! Example of impurity analysis in ethanol and acetone.

Analysis of Impurities in Acetone ■ Acetone stored in a light-blocking reagent bottle in a cool, dark place was transferred to a transparent glass bottle without light-blocking properties and left at room temperature for about one month (the bottle was sealed). ■ Results - Diacetone alcohol was detected as an impurity. - It is possible that impurities were generated due to the influence of temperature, humidity, and light. *For more details, please refer to the PDF document or feel free to contact us.*
[Information] GC-MS Analysis Device Guide
Introducing the sample introduction device and the types of analytical samples and analysis content that each device specializes in!

For more details, please refer to the PDF document or feel free to contact us.
[Data] Analysis of Additive Defects in Polymers Using Thermal Desorption GC-MS
It is possible to analyze with good sensitivity using thermal desorption GC-MS analysis! We propose methods tailored to the symptoms of issues and objectives.

For more details, please refer to the PDF document or feel free to contact us.
Analysis of difficult-to-detect substances by reaction thermal decomposition GC-MS.
By adding a special reagent to the sample and heating it, it becomes possible to detect substances that are usually difficult to detect!

For more details, please refer to the PDF document or feel free to contact us.