All products and services
151～180 item / All 272 items
-
The cause of complaints regarding aluminum die-cast painting was contamination by foreign substances.
70 percent of foreign matter contamination is caused by the cleaning process. It is possible to reduce it by 99 percent through filter replacement and cleaning solution management.
last updated
-
Aluminum die-cast painting had issues with color unevenness affecting production efficiency.
The cause of color unevenness is the variation in film thickness. By managing within plus or minus 30 microns, it is possible to reduce it by 90 percent.
last updated
-
Aluminum die casting coating was all about managing the viscosity of the drips.
The cause of the dripping is the mismatch between paint viscosity and curing temperature. It explains the phenomenon where a 20-degree difference results in a threefold increase in occurrence rate.
last updated
-
Aluminum die-cast coating was at risk of blistering and paint delamination.
The cause of blisters is the volatilization and gasification of oils. The simultaneous removal of moisture and oils from the material is the key point for countermeasures.
last updated
-
Aluminum die-cast coating was all about pinholes in quality.
The true cause of pinhole formation is not the paint, but insufficient gas release. This explains how it can occur even with heating at 60 degrees.
last updated
-
The poor adhesion in aluminum die casting painting was caused by insufficient degreasing.
Insufficient degreasing can trigger malfunctions. An explanation of the importance of the often-overlooked degreasing process.
last updated
-
Aluminum die casting coating's pre-treatment was everything for quality.
The quality of the pre-treatment greatly affects adhesion. What processes should be checked before the paint and equipment?
last updated
-
The aluminum die-cast coating was all about poor adhesion.
Poor adhesion cannot be solved by paint alone. Multiple processes such as pretreatment, degreasing, and gas release are involved.
last updated
-
Insufficient surface treatment was the culprit for rust reoccurrence, a warning of decreased adhesion.
Optimization of the entire preprocessing ensures painting quality.
last updated
-
Insufficient rust prevention is the cause of all rust reoccurrence: the truth within the coating.
Methods to ensure long-term durability through rust prevention treatment.
last updated
-
Insufficient drying was the culprit of the pinholes, the essence of the cleaning process.
Achieving high-quality painting through the optimization of the drying process.
last updated
-
Insufficient cleaning is the cause of all painting defects and the truth behind recontamination.
Post-cleaning environmental management determines the quality of the coating.
last updated
-
The overly rough surface was the culprit of the pinholes; the essence of pre-treatment management.
The importance of the balance of roughness in determining paint quality.
last updated
-
Surface roughness is the cause of all adhesion failures and the truth behind the delamination chain.
A thorough explanation of the truth about surface roughness that causes painting defects.
last updated
-
Insufficient surface treatment was the culprit of rust reoccurrence, a warning of decreased adhesion.
Optimization of the entire preprocessing is essential.
last updated
-
Insufficient rust prevention is the cause of all rust reoccurrence; the truth within the coating.
Ensure long-term durability with rust prevention treatment.
last updated
-
Insufficient drying was the culprit behind the pinholes, the essence of the cleaning process.
Improvement of quality through optimization of the drying process.
last updated
-
Insufficient cleaning is the cause of all painting defects and the truth behind recontamination.
Post-cleaning environmental management is important.
last updated
-
The overly rough surface was the culprit of the pinholes; the essence of pre-treatment management.
The balance of roughness affects quality.
last updated
-
Surface roughness is the cause of all adhesion failures and the truth behind the delamination chain.
The truth about surface roughness that causes painting defects.
last updated
-
Insufficient surface treatment was the culprit behind the recurrence of rust, a warning of decreased adhesion.
Has rust reappeared after painting? The cause may not be the paint, but rather a decrease in adhesion due to insufficient surface treatment.
last updated
-
Insufficient rust prevention is the cause of all rust reoccurrence: the truth within the coating.
Has rust reappeared after a while since painting? The cause may not be the paint film, but rather corrosion of the substrate due to insufficient rust prevention treatment.
last updated
-
Insufficient drying was the culprit behind the pinholes, the essence of the cleaning process.
Are you overlooking the drying process after cleaning? In fact, residual moisture may be causing pinholes and blisters.
last updated
-
Insufficient cleaning is the cause of all painting defects and the truth behind recontamination.
The peeling paint and pinholes are not decreasing. The cause may not be due to degreasing, but rather residual chemicals from insufficient cleaning or recontamination.
last updated
-
The overly rough surface was the culprit of the pinholes; the essence of pre-treatment management.
Are you noticing an increase in pinholes and film thickness variation after blast treatment? The excessive management of surface roughness may actually be the cause.
last updated
-
Surface roughness is the cause of all adhesion failures and the truth behind delamination chains.
The peeling of paint and poor adhesion are relentless. The cause may not be the paint itself, but rather a decrease in the adhesion area due to insufficient surface roughness.
last updated
-
The culprit of poor adhesion after degreasing was leaving it unattended: the essence of pre-treatment management.
Have you not waited after defatting? That "waiting time" may be causing the paint to peel.
last updated
-
Insufficient degreasing is the root cause of all painting defects and reduced adhesion.
The reason for the persistent paint peeling and pinholes may be the invisible residue of oil.
last updated
-
Defect in "Film Thickness Design": The Final Warning of Frequent Chipping
Chipping of aluminum die-cast coating is primarily caused by insufficient film thickness. Have you improved the coating design?
last updated
-
The Crisis of "Baking Management": The Truth Behind Frequent Curing Failures
The main cause of poor curing in aluminum die-cast coating is insufficient baking. Have you checked the baking conditions?
last updated