We will exhibit at Mechatrotech Japan 2019 (October 23 to October 26) ■■■ Cutting power meters, etc.

Kistler Japan G.K. Head office

We will be exhibiting at "Mechatrotech Japan 2019," which will be held from Wednesday, October 23 to Saturday, October 26, at Port Messe Nagoya. At our booth, we will showcase how to effectively cut materials. What impact do tools have on cutting force? How can we extend the lifespan of tools? What kind of cutting force acts on the blade? What are the optimal cutting data and methods? We will display cutting power meters that can help answer these questions, and we look forward to your visit. Please stop by our booth! ＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊ Mechatrotech Japan 2019 October 23 (Wed) - 26 (Sat), 2019 10:00 AM - 5:00 PM (until 6:00 PM on Friday, and until 4:00 PM on the last day) Port Messe Nagoya Booth Number: 2C19, 2nd Exhibition Hall 　* Look for the blue "KISTLER" against a white-themed booth * ＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊

Date and time
Capital
Entry fee

Related product information

LabAmp 5167A
New product released in August 2017! It is a charge amplifier for multi-component force measurement with built-in AD conversion functionality!

The LabAmp model 5167Ax1 features advanced signal processing technology with excellent flexibility. The frequencies for high-pass, low-pass, and notch filters can be directly input as numerical values in Hertz. Input signals can be flexibly converted to analog output. The graphical user interface (GUI) not only provides an easy and intuitive way to configure the device but also displays different measurements (for example, live values, minimum/maximum values, root mean square). The virtual channel function can sum different input signals in real-time. In the case of the Kistler multi-component dynamometer, it can calculate not only the torque vector obtained from three components but also the force.
Cutting Power Meter DAQ (Data Acquisition and Analysis) System 5697A
A general-purpose data acquisition system for controlling interfaces and charge amplifiers!

The cutting power measurement DAQ system consists of a data acquisition box and DynoWare software. The data acquisition box can connect to two multi-channel charge amplifiers. A 16-bit A/D converter digitizes the analog output data. The system connects to a PC via a USB 2.0 port, and the control of the charge amplifier or signal conditioner is managed by the data acquisition box through an RS232C cable. Users can easily operate a high-sampling-rate data acquisition system.
Multi-component small dynamometer (±4kN) 9119AA
Measure the three orthogonal components of force, enabling the measurement of extremely small forces with high resolution and high sensitivity!

This dynamometer is equipped with four three-component force sensors installed between the top plate and the adjacent base plate under high preload. The special arrangement of the sensors minimizes the influence of temperature. Each sensor contains a quartz piezoelectric element, with one responding to force in the Y direction, and the other two responding to shear forces in the X and Z directions, respectively. The displacement caused by the load is also at a negligible level. The signals from the four force sensors are output via a 9-pin connector, allowing for the measurement of multi-component force moments. These sensors are grounded and insulated, eliminating ground loop issues. The dynamometer has been treated for rust prevention. Additionally, it achieves protection class IP67 when connected with cable types 1687B5 and 1677A5.