ケイエルブイ Official site

Multi-point measurement capable FBG sensor

Due to the ability to detect minute structural changes in the processed area caused by external forces and temperature as wavelength shifts, it is possible to measure the temperature and strain at multiple points with a single sensor. 【Features】 - 20 sensors arranged on a single fiber (customizable to freely arrange up to 30 sensors) - Compact and lightweight interrogator (X100: 60g) - Uses light, so it is not affected by electromagnetic radiation - Capable of high-speed sensing - Customizable length of FBG sensor chain and measurement points - High wavelength accuracy (< 0.15nm) - Highly durable

High-efficiency cooling technology: An optimal cooling solution for thermal management of high-power electronic devices.

Product Model ■AURORA (Forced Air Cooling) Cooling modules for power modules, IGBT power semiconductors, PCBs, and components. Suitable for applications with limited installation space. ■ULTIMA (Forced Air Cooling) Suitable for air cooling of industrial control equipment, AC drives, inverters/converters, and renewable energy-related equipment using IGBT and SiC power semiconductors and power devices. Capable of handling high power (KW level). Evaluation kits are available. Customization options are also possible. For more details, please refer to the catalog and product page.

Non-destructive testing: It is possible to inspect objects non-contact without causing damage using terahertz light. An all-in-one model equipped with a scanning stage and software.

Acquisition speed: 50-150 Hz Center frequency: 120 GHz Frequency window: 21 GHz Dynamic range: 50 dB Scan area: 295×595 mm² Spatial resolution: 1.0 mm Depth resolution: 7.0 mm Power supply: 230 V, 50 Hz or 60 Hz Power consumption: typ. 50 W Dimensions (L × D × H): 110 × 60 × 80 cm

Achieving a tracking resolution of approximately 0.0001 pixels with a unique algorithm.

■ Point & Shoot System Setup for vibration monitoring (such as structural analysis) using a compact USB industrial camera. ■ USB VMA Full System Setup that enables smart aligning (module software) using a compact USB machine vision camera, light sources, and vibration generators. ■ Dedicated Camera Bundled System Setup aimed at uncompromising high-speed transient and high-frequency measurements. This system is comparable to a scanning laser vibrometer and can also be used to measure nonlinear transient responses that are impossible with scanning lasers. ■ Base Software If you wish to use your own cameras or videos, or analyze videos obtained from commercially available cameras or smartphones, we can provide the software only. It analyzes deformation measurements, magnification of normal movements, planar stress, static deformation, recoil or retrograde plastic creep due to wear or misalignment, thermal stretching, and schlieren, among others. For details on the contents of the bundled set, please refer to the catalog.

Acoustic sensors that can be used in high temperature, high pressure, high humidity, high magnetic field, and radiation environments.

■Fiber Optic Microphone Material: Ultem Frequency Range: 150Hz to 10kHz (±3dB) SN Ratio: 70dB (Measured at 1kHz, 94dB, gain stabilized with the central tab) Maximum Sound Pressure: 130dB SPL Operating Temperature: -10℃ to +50℃ Storage Temperature: -20℃ to +70℃ ■Fiber Optic Dimensions: Φ 0.9 to 3mm Connector: E2000 (with protective cap) Type: Single-mode 9 microns Signal Loss: 0.3 dB/km to 0.6 dB/km Minimum Bend Radius: 5mm for short-term, 40mm for long-term storage ■Adjuster Dimensions: 120 × 110 × 60mm (length x width x height) Sensitivity: 150mV/Pa (Measured at 1kHz, 94dB, gain stabilized with the central tab) Maximum Output Voltage: +5V Output Jack: 3.5mm Operating Temperature: 0℃ to +40℃ Storage Temperature: -20℃ to +70℃ Power Plug-in Unit: 100-240V AC-5V Power Consumption: 5V – 0.5 W

Can be used in harsh environments such as high temperatures and high frequencies. Dynamic pressure wave measurement of turbochargers.

Operating Mode: Differential Pressure Natural Frequency: >100kHz Frequency Range: 10Hz-1MHz (typ.) depending on the converter used Pressure Measurement Range: 0.5 Bar (10^5 Pa) (≈190dB SPL) *Differential Self-Noise: 50dB SPL (BW: 1Hz, over full bandwidth) 40dB SPL (in low noise environments) Damage Threshold: > 1Bar (≈200dB SPL) *Differential Sensitivity: 0.3mV/Pa (10V/Bar) kg Calibration: Factory calibrated (An adapter for standard calibrators is available.) <General Specifications> Pressure Medium: Gas Fiber Type: Multi-mode 50/125 OM2 Output Connector: E2000 LSH APC Sensor Head Shape: 3.2×10 mm (2.5×10 mm is also possible) Weight of Sensor Head: 0.5 g Fiber Cable Length: 2 m (standard) (other lengths are also possible) Operating Temperature Range: -40 to +350℃ Peak Operating Temperature (short term): 420℃ Temperature Influence: < 1% (response sensitivity) Operating Environment Humidity: 100% (RH) EMI/RFI: No effect