0080 Talc and Mica Emission Troubleshooting Measures

To prevent clogging in the hopper receiving talc, mica, etc. from the Furecon!

Used for blockage prevention in hoppers receiving materials such as talc and mica from bulk bags. The measures for discharge troubles have been completed! Hopper diameter: 1400φ Hopper inclination: 60° Since we sometimes handle various raw materials, we have installed eight blow discs to ensure thoroughness. Blow discs are inexpensive equipment, so we can install many to eliminate any issues! For hoppers with a diameter of approximately 1400 to 2000φ, it is common to install a total of eight discs in two tiers of four each, as shown in the reference diagram below. This time, due to a high risk of blockage just above the discharge section, we installed two of the lower four discs at a position 150 mm lower. Since the installation of the blow discs, there have been no powder discharge troubles at all. If you are having issues with powders and granules, please consult us. We have published numerous case studies on our company website. You can check them via the link below.

basic information

【Features】 ○ Brody Disk: BD-15S-B, 4 pieces ○ Controller: C-SV4 (standard specification), 1 unit ○ Prevents clogging in the hopper ○ Allows for the installation of multiple units to eliminate all obstacles 【Key Points of This Equipment】 ■ The elastic disk (silicone) is very important in terms of strength and durability due to the risk of foreign matter contamination. The silicone disk of this equipment excels in strength and durability. Once you use it, you will understand! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. A dedicated controller is also available. *For more details, please feel free to contact us. TEL: 06-6777-2777