0107 Response to poor discharge from the hopper of the bulk bag filling device.

0107 Response to poor discharge from the hopper of the bulk bag filling device.

Case of a blow disk adopted for a hopper of a bulk filling device with unstable raw material discharge.

The raw materials are transported by air to the raw material hopper of the bulk bag filling device, and from the hopper, the materials are fed to the bulk bag using a table feeder and a screw feeder. In cases where the materials are being cut out, the raw materials became biased in one direction within the hopper, leading to unstable discharge of the materials. By installing four blow disks and using a controller with four solenoid valves, we solved the problem by sequentially aerating one location at a time. 【Overview】 ■ Hopper dimensions: 1400×1400 ■ Powder type: Fertilizer (final product) <Reference values for aeration sequence and time> ■ Solenoid valve 1: 3 seconds ON / several seconds OFF ■ Solenoid valve 2: 3 seconds ON / several seconds OFF ■ Solenoid valve 3: 3 seconds ON / several seconds OFF ■ Solenoid valve 4: 3 seconds ON / several seconds OFF After the above, set an interval time (several tens of seconds to several minutes) Repeat the above * For more details, please refer to the PDF document or feel free to contact us. * Our website features numerous case studies. You can check them via the link below.

basic information

【Product Specifications】 ■ Brody Disk BD-15S-B 4 pieces ■ Controller C-SV4 1 unit 【Key Points of This Equipment】 ■ The elastic disk (silicone) is very important in terms of strength and durability, especially considering the risk of foreign material contamination. The silicone disk of this equipment excels in strength and durability. We believe you will understand this once you use it! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. A dedicated controller is also available. *For more details, please refer to the PDF document or feel free to contact us. TEL: 06-6777-2777