Preventing bridging of granules with high moisture content.

Preventing bridging of granules with high moisture content.

Trouble resolved with the installation of the Brodisk and Brodisk Mini!

We will introduce a case where the problem of high-moisture granules bridging at the hopper outlet was resolved by installing a Brodie disk and a Brodie disk mini. Initially, you were using an overseas vibrator (air ball type), which had some effectiveness but occasionally caused bridging, leading you to contact us. First, the risk of blockage is highest just above the outlet, so we installed two Brodie disk minis in that location. It is preferable to install them close to the discharge outlet, which is why we chose the Brodie disk mini. Additionally, we installed two Brodie disks about 150mm higher along the hopper wall than the Brodie disk mini. [Overview] ■ Hopper specifications Top: 800φ, Outlet: 80φ, Angle of repose: approximately 60° ■ Raw material Particle size: approximately 5φ, Moisture content: over 20% *For more details, please refer to the PDF document or feel free to contact us. *Our website features numerous case studies, which you can check via the link below.

basic information

【Product Specifications】 ■ Bro-Disk Mini: BD-08S-W 2 pieces ■ Bro-Disk: BD-15S-W 2 pieces ■ Controller: C-SV1 1 unit 【Key Points of This Equipment】 ■ The strength and durability of the elastic disk (silicone) are very important from the perspective of foreign matter contamination risk. The silicone disks of this equipment are exceptionally strong and durable. Once you use it, you will understand! ■ Control (how to aerate?) is important! We provide guidance on what should be done. A dedicated controller is also available. *For more details, please feel free to contact us. TEL: 06-6777-2777