0317 Bengal Bridge Countermeasures

Introduction of a case study on the implementation of Brodisk for bridge measures in Bengal.

The equipment was installed to prevent bridging of red iron oxide in the hopper of the screw feeder. Since the particle size of the material is quite fine and its fluidity is very poor, we recommended the "BD-20 type" with a higher air volume instead of the standard "BD-15 type." (Blow disk specification) The blow disk is an economical device, so even if many are installed, the cost remains limited. Our company provides advice on layout planning, so please feel free to consult us. 【Usage Conditions】 ■ Hopper Size: 1500 (screw direction) × 1000 ■ Material ・ Name: Iron oxide ・ Particle size: Approximately 1μm ・ Bulk density: 0.45 ■ Arrangement and Quantity of Blow Disks ・ Installed on two surfaces parallel to the screw ・ Three units on the lower level and two units on the upper level per side, divided into two tiers ・ A total of 10 units installed ■ Control Method ・ Based on the screw, two opposing blow disks are sequentially turned on with air in a time-lagged manner * For more details, please refer to the PDF materials or feel free to contact us. * Our website has many implementation examples available. You can check them via the link below.

basic information

【Product Specifications】 ■ Brody Disk BD-20S-B 10 pieces ■ Controller C-SV6 1 unit 【Key Points of This Equipment】 ■ The elastic disk (silicone) is very important in terms of strength and durability, especially considering the risk of foreign material contamination. The silicone disk of this equipment excels in strength and durability. Once you use it, you will understand! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. A dedicated controller is also available. *For more details, please refer to the PDF document or feel free to contact us. TEL: 06-6777-2777