0321 Solving the bridge of square pellets

Introducing examples of bridge measures implemented for rectangular prism materials.

This is an inquiry regarding a case where 'the pellets are bridging solidly just above the discharge valve, and it is difficult to resolve this with hammering from outside the hopper.' We had previous experience dealing with similar-sized materials, so we were able to provide information on layout and operating methods based on that. However, the material this time has quite a bit of stickiness on the surface. There was some risk involved, but we were able to achieve good results. [Overview] ■ Hopper Size: 1000φ ■ Discharge Outlet Diameter: 150A ■ Target Material: Pellets approximately 3mm x 3mm x 5mm ■ Other: This time, the air pressure was set higher, and the air ON time was set shorter. ■ All materials and processing are produced domestically. *For more details, please refer to the PDF document or feel free to contact us. *Our website features numerous implementation examples. You can check them out via the link below.

basic information

【Other Features】 ■ Brody Disk BD-15S-W 4 pieces ■ Controller C-SV4 1 unit 【Key Points of This Equipment】 ■ The strength and durability of the elastic disk (silicone) are very important from the perspective of foreign matter contamination risk. The silicone disk of this equipment is exceptionally strong and durable. We believe you will understand this once you use it! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. A dedicated controller is also available. *For more details, please refer to the PDF materials or feel free to contact us. TEL: 06-6777-2777