0445 The fiber powder bridge has been eliminated in one go.

0445 The fiber powder bridge has been eliminated in one go.

A case where a bridge occurred and multiple vibrators were installed, but it became even tighter, has been resolved!

This is an introduction to a case delivered to a crusher and shredder manufacturer. The customer (the crusher manufacturer) consulted us, stating, "During the trial operation of the device we manufactured, a bridge formed, and even after installing multiple vibrators, it became even harder to discharge." The summary of the trouble was that fiber powder was bridging in the hopper mentioned above, and when the vibrators were activated, it completely clogged within a few seconds, making it impossible to discharge at all. On the same day we were contacted, we sent the equipment for testing, and it was installed the very next day. The test results were excellent, and it was adopted as is. 【Hopper Overview】 ■ Top: 800×800 ■ Discharge section: 200φ ■ Three-sided slope (one side is vertical, two sides have sufficient slope, and one side is gentle) *For more details, please refer to the PDF document or feel free to contact us. *Our website features numerous case studies. You can check them out via the link below.

basic information

【Bro-Disk Installation Overview】 ■ Install 3 standard Bro-Disks on one gentle side of the above hopper, and 1 on each of the two inclined sides, for a total of 5. <Product Specifications> ■ Bro-Disk BD-15S-W 【Key Points of This Equipment】 ■ The elastic disk (silicone) is very important in terms of strength and durability, especially considering the risk of foreign material contamination. The silicone disk of this equipment excels in strength and durability. Once you use it, you will understand! ■ Control (how to aerate?) is important! We provide guidance on what should be done. A dedicated controller is also available. *For more details, please refer to the PDF document or feel free to contact us. 　TEL: 06-6777-2777