Preventing the bridging of PP pellets

Preventing damage to the hopper! Introduction of an example to prevent bridging of PP pellets.

We received contact from a customer stating, "Bridging occurs due to the lot of raw materials, and we would prefer not to use knockers considering the damage to the hopper." After detailed discussions, we have resolved the bridging issue with your adoption of our solution. This equipment prevents bridging through the vibration of the silicone discs and air injection onto the inner surface of the hopper. Therefore, it does not cause any damage to the hopper. Please contact us for details regarding the configuration. This equipment is easy to install and cost-effective, but the layout is important. Feel free to reach out. 【Case Overview】 ■ Target Material: PP Pellets ■ Hopper Diameter: φ350 ■ Discharge Diameter: φ70 ■ Model & Configuration: Two BroaDisc Mini discs with a diameter of 50mm installed at varying heights, totaling four discs ■ Our Scope: Delivery of BroaDisc Mini and controller *For more details, please refer to the PDF document or feel free to contact us.

basic information

【Other Case Overview】 ■Customer Preparation 1. Tubes and fittings between the Brody Disk Mini and the controller 2. Pressure reducing valve before the controller 3. Equipment installation 4. Piping and wiring work 【Key Points of This Equipment】 ■The elastic disk (silicone) is very important in terms of strength and durability, especially considering the risk of foreign substance contamination. The silicone disk of this equipment excels in strength and durability. We believe you will understand this once you use it! ■Control (how to aerate?) is important! We provide guidance on what should be done. A dedicated controller is also available. *For more details, please refer to the PDF materials or feel free to contact us.