0531 Prevention of adhesion of urethane pellets

To prevent adhesion, it is effective to spray air at high pressure! Here are examples of the installation of blow discs.

We received a new inquiry from a rubber product manufacturer who adopted our equipment a long time ago. In the previous project, they used the Brodie Disk Mini to prevent fine powder bridging, and it was well received. Although quite some time has passed since then, it seems they have been using the elastic disks (silicone disks) stably without any degradation or damage. This time, they consulted us because the material tends to stick to the inner surface of the hopper, and they wanted to find a solution. The effectiveness of our equipment depends on the degree of sticking (adhesion), so we first installed one Brodie Disk (standard type) on just one surface, which yielded very good results. Based on the test results, it was decided to install them on each surface. 【Overview】 ■ Material: Urethane pellets ■ Hopper dimensions: 450×450 ■ Discharge section dimensions: 100×100 ■ Transport: Blower ■ Control: To prevent adhesion, it is effective to inject air at high pressure, so the operating air pressure is set higher, and four Brodie Disks are activated one by one with a time delay. *For more details, please refer to the PDF document or feel free to contact us.

basic information

【Product Specifications】 ■ Brody Disk: BD-15S-B, 4 pieces ■ Controller: C-SV4, 1 unit 【Key Points of This Equipment】 ■ The elastic disk (silicone) is very important in terms of strength and durability, especially considering the risk of foreign matter contamination. The silicone disk of this equipment is exceptionally strong and durable. You will understand this once you use it! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. A dedicated controller is also available. *For more details, please refer to the PDF document or feel free to contact us.