[Analysis Case] TOF-SIMS Analysis of Solder Separation Cross Section

It is possible to evaluate the distribution of inorganic and organic substances in microdomains.

last updated Mar 13, 2025

[Analysis Case] Qualitative and Imaging Analysis of Micro Areas Using TOF-SIMS

Qualitative and imaging analysis of foreign substances in the sub-micrometer order and micro-regions is possible.

last updated Mar 13, 2025

Gas generation analysis by EGA-MS method

GC/MS: Gas Chromatography-Mass Spectrometry

last updated Mar 12, 2025

[Analysis Case] Evaluation of Cu Surface Discoloration Using AES and SEM-EDX

It is possible to perform elemental analysis with a shallow detection depth while conducting SEM observation.

last updated Mar 13, 2025

[Analysis Case] Evaluation of Carrier Concentration Distribution in Si-IGBT Chips

SRA evaluation of field stop layers and lifetime killers.

last updated Mar 13, 2025

[Analysis Case] Image Analysis of Micro Beer

It is possible to evaluate the distribution of micro-regions.

last updated Mar 13, 2025

Comparison of depth profiling analysis using XPS and AES.

XPS: X-ray Photoelectron Spectroscopy AES: Auger Electron Spectroscopy

last updated Mar 12, 2025

[Analysis Case] Evaluation of "Water" in Quartz and Glass Using SIMS

Depth-direction analysis of hydrogen using 'heavy water (D2O) treatment'

last updated Mar 13, 2025

Spherical aberration correction function

TEM: Transmission Electron Microscopy

last updated Mar 12, 2025

[Analysis Case] Identification of Pyrolysis Products by High-Temperature XRD

XRD measurement can be performed while increasing the temperature.

last updated Mar 13, 2025

[Analysis Case] Analysis of Microscopic Contaminants on Wafer Surface

Composition analysis of 30nm size is possible without processing.

last updated Mar 13, 2025

[Analysis Case] Evaluation of the Fracture Surface of Laminated Samples by AES Analysis

Visualizing a 50nm thin film with a cross-sectional sample.

last updated Mar 13, 2025

[Analysis Case] Residue Analysis of Cotton Swabs with Ethanol

Analysis of stains and cleaning residues that are not visible under an optical microscope is possible using TOF-SIMS.

last updated Mar 13, 2025

Examples of TDS analysis by representative materials and purposes

TDS: Thermal Desorption Gas Analysis Method

last updated Mar 12, 2025

[Analysis Case] Raman Mapping of Carbon Materials

It is possible to evaluate the distribution of the crystalline state of carbon within the sample surface.

last updated Mar 13, 2025

[Analysis Case] Evaluation of Interstitial Carbon in Si Substrate Using Low-Temperature PL and SIMS Analysis

It is possible to confirm the trace amounts of carbon contained in the Si substrate.

last updated Mar 13, 2025

[Analysis Case] Elemental Analysis of Wire Bonding Interface

By using a combination of processing, elemental analysis of the interface is possible.

last updated Mar 13, 2025

[Analysis Case] Corrosive Gas Analysis by TDS

You can check for gases that have a negative impact on the product.

last updated Mar 13, 2025

[Analysis Case] Structural Analysis of Positive-Type Photoresist

Structural analysis of photosensitizers is possible using thermal decomposition GC/MS method.

last updated Mar 13, 2025

[Analysis Case] Evaluation of Si-based IGBT Chip Cross-section by Low-Temperature Micro Photoluminescence Analysis

It is possible to confirm the influence of the lifetime killer from the cross-sectional direction.

last updated Mar 13, 2025

[Analysis Case] Observation of Shape Changes of Polymers on a Substrate Using Liquid AFM Measurements

Visualization of structural changes in samples in the atmosphere and in aqueous solutions.

last updated Mar 13, 2025

Outgas analysis using a gas concentration device with GC/MS.

GC/MS: Gas Chromatography-Mass Spectrometry

last updated Mar 12, 2025

Analysis case: Evaluation of the oxide film on the surface of solder balls.

Evaluation case of spherical shape samples

last updated Mar 13, 2025

[Analysis Case] Evaluation of Functional Groups in Graphene

Evaluation of functional groups in graphene is possible using thermal decomposition GC/MS method.

last updated Mar 13, 2025

[Analysis Case] Comprehensive Evaluation of CMOS Sensors

Reverse engineering of smartphone components

last updated Mar 13, 2025

[Analysis Case] Evaluation of Internal State of Transistor

We evaluate abnormalities inside the device non-destructively.

last updated Jul 18, 2025

[Analysis Case] Evaluation of Curing Degree of Epoxy Resin by FT-IR

It is possible to evaluate the degree of curing of the resin by capturing changes in functional groups.

last updated Mar 13, 2025

[Analysis Case] Evaluation of Organic Component Desorption in a Vacuum

The temperature dependence evaluation of the desorption of specific organic components is possible through composite analysis.

last updated Mar 13, 2025

[Analysis Case] Simultaneous Heating Analysis of Copper Plates and Solder by TDS

It is possible to evaluate degassing in an environment close to the actual process by bringing the materials into contact with each other.

last updated Mar 13, 2025

[Analysis Case] Evaluation of Curing Degree of Polyimide Resin by FT-IR

By capturing changes in functional groups, it is possible to evaluate the imidization rate of the resin.

last updated Mar 13, 2025