Microporous ceramics
Microporous ceramics
Holes with a high aspect ratio penetrate in the extrusion direction. Generally, in machining, deep holes with an aspect ratio (depth/inner diameter) of 5 to 10 or more are considered difficult for holes with a diameter of less than 1mm. With extrusion molding technology, it is possible to produce items with an aspect ratio of over 200. It is possible to manufacture with a freely adjustable wall thickness, from thin to thick.
1～10 item / All 10 items
-
Pilot's ceramics "Microporous ceramics"
Microporous ceramics: Production of minimum pore diameter Φ0.02mm is possible.
last updated
-
Microporous ceramics "temperature sensor"
Silver resistance element/alumina sensor bobbin/temperature sensor using the element
last updated
-
High-purity ceramics used for insulators and sensor holders.
Ideal for sensor insulators! Supports reduced outgassing with high-purity ceramics.
last updated
-
Ceramics with fine pores suitable for electrodes used in electrical discharge machining.
Corresponding to the requested hole diameter for the electrode used in the discharge machining.
last updated
-
Fine ceramics ≪Case 1: Microporous ceramics≫
Here are some examples of thin-walled pipe production!
last updated
-
Leak resistor "Air Leak" using fine-pore ceramics.
Using extrusion technology capable of an aspect ratio of 200 or more, we manufacture high-quality leak resistors!
last updated
-
Fine ceramics made using extrusion molding by a pilot.
Pilot, a comprehensive writing instrument manufacturer, can produce fine holes and multi-porous through-holes with an outer diameter of φ0.2 to φ8, an inner diameter of φ0.005 and a length of approximately 120mm.
last updated
-
Introduction of ceramic pipes
The thermal conductivity is 185 W/(m·K)! We apply the microfabrication technology developed in the production of mechanical pencil leads!
last updated
-
[Must-see for Designers and Developers] Pilot's Micro-Pore Ceramics
Microporous ceramics: Capable of producing pores with a minimum diameter of φ0.02mm. New possibilities opened up by pilot microporous ceramics.
last updated
-
High-precision ceramics realized through extrusion molding of micro-pores and deep holes.
It is possible to manufacture fine-pore ceramics with a minimum aperture of φ0.02mm and dimensional accuracy of ±5%, making it ideal for miniaturized sensor holders and flow control components.
last updated