プロテック Official site

Catheter bending durability testing device with excellent handling properties.

【Features】 ● Compact and easy to handle, affordable device Width 200mm × Depth 300mm × Height 300mm, 8.5kg ● Starts with the switch ON ● Simultaneous testing of multiple short samples ● Stable bending deformation using a template ● Easy adjustment of deformation amount (e.g., 0 to 30mm) ● Testing speed (e.g., 200 times/min) ● Testing possible with physiological saline and heating ● Simple mechanical counter adopted For more details, please refer to the catalog.

Measure the micro-torque and angle transmission characteristics of guide wires and catheters without loss!

**Features** - Measures ultra-small torque without loss Capable of measuring torque below 1 mNm using air bearings Measurement resolution is 0.01 mNm. - Freely set rotation control at your fingertips High-precision motor control faithfully reproduces the movement at the wire's end Measures the transmission angle accuracy between the hand and the tip in both forward and reverse rotation. - Displays measurement graphs in real-time Real-time display of data during measurement. Also allows for data judgment at specified points. - Saves measurement data in CSV format All sampled data from measurements can be saved in CSV file format. Overlaid saved data can be displayed for comparison of measurement results.

Ideal for load testing of large-capacity motors such as geared motors!

■Features ● Easy load measurement with manual operation You can freely apply brakes to the motor on the manual operation screen and measure load characteristics. ● Real-time display of NT curve Data during measurement is displayed in real-time. Data for each measurement point and the NT curve can be saved. ● Save measurement data in CSV All sampling data can be saved in CSV file format. ● Measurement mode Torque sweep measurement, optimal for measuring NT characteristics, can be set with simple parameter settings. Up to 100 parameters can be set to configure measurement conditions suitable for the motor. ■Main Specifications ● Overall torque accuracy: Torque ±1% / full scale Speed ±1% / full scale ● Measurement items Torque, speed, current, voltage ● Measurement mode: Torque sweep measurement ● Load method Powder brake (Hysteresis brake is also supported) *For more details, please refer to the catalog. It is available for free download.

Torque testing of metal bone screws is possible!

**Features** - Testing compliant with JIST0311 is possible, achieving the items established for the mechanical testing methods of metal bone screws. - All data required by the above standard tests is fully collected and displayed in real-time on a PC screen. - Measurement data can be saved and retrieved in CSV file format, making it ideal for automation and data management of tests. - Parameters can be set arbitrarily. - An air bearing is adopted in a horizontal configuration to minimize the impact on the mechanical testing of metal screws (implant screws). - The depth of screw insertion, which changes continuously, is measured with high precision using a laser sensor. - Both forward and reverse reciprocation and screw insertion are possible, allowing for the evaluation of pull-out strength after screw insertion. - Conversion of implant screws is easy, and replacement and repositioning of synthetic bone are also simple. - It also complies with the American ASTM F543-07 standard. - For other functions and details, please refer to the catalog.

For measuring the torque of plungers and gaskets. Torque control for the plunger tightening operation of prefilled syringe formulations is possible.

【Specifications】 Torque overall accuracy: ±1% / full scale Zero point shift: ±0.5% Repeatability: ±0.5% Non-linearity: ±0.5% Torque output: DC ±2V ±0.1 Power supply voltage: ±DC15V ±0.5V Power consumption: 750mW Rotational speed accuracy: ±1% / full scale Command voltage: 0 to 5V Pulse output: 200P A phase, B phase, Z phase Permissible overload: approximately 200% Operating temperature range: ±5℃ to 40℃ Operating humidity: 80% R.H or less

Ideal for load testing that requires high responsiveness! Testing load characteristics and rotational characteristics through speed control and torque control!

● Easy load measurement with manual operation You can freely apply brakes to the motor on the manual operation screen and measure the load characteristics at that time. Additionally, you can easily apply load to the motor on this manual screen. ● Real-time display of NT curve Data during measurement is displayed in real-time. Data from each measurement point and the NT curve can be saved. This is ideal for creating documentation of measurement data. ● DC voltage specification: Measurement range up to DC200V ±1% ● DC current specification: Measurement range up to DC20A ±1% Measurements beyond the above can be supported as options. A power meter is included for measuring AC motors. ● Computer: PC/AT compatible machine ● Operating environment: Windows 7 ● Save measurement data in CSV format All sampled data from the measurements can be saved in CSV file format. The saved data can be loaded with this software and can also be utilized in Excel. ● Measurement modes Torque sweep: Automatic measurement by torque control Speed sweep: Automatic measurement by speed control Constant torque: Constant control of specified torque Constant speed: Constant control of specified speed

A wide variety of motor torque measuring devices essential for motor development and research are featured!

【Features】 ● Controls brake torque through software, equipped with functions for brake linear sweep, constant torque, constant rotation speed, step torque, and torque control measurement based on external patterns. ● As standard items, graphs displaying voltage, current, power, torque, rotation speed, output power, and efficiency are shown simultaneously on the basic screen. ● Capable of measuring rotation speed control through linear sweep, step rotation speed, and external patterns (optional). ● The linear graph displays standard item graphs and selected item graphs calculated by linearizing rotation speed and current.