12th Non-Destructive Testing Comprehensive Exhibition July 23 (Wednesday) - 25 (Friday), 2025, 10:00 AM - 5:00 PM Tokyo Big Sight, East Exhibition Hall Admission Fee: Free (Registration required) Organizers: Japan Non-Destructive Testing Industry Association Japan Management Association Main Exhibits New Product: Ultrasonic Flaw Detector UI-29 Portable TOFD Equipment, along with demonstrations and introductions of exhibits.

A preparatory seminar for the re-certification practical exam for Level 2 ultrasonic testing, which you applied for in October 2024 and is scheduled for late February next year, will be held by instructor Shojo from Sona Engineer at the Polytech Center Kansai (Settsu City, Osaka Prefecture) from February 1 (Saturday) to February 3 (Monday). For more details, please carefully check the attached materials and contact the organizer directly for inquiries and applications.

We would like to announce the Spring 2025 UT Level 2 New Primary Examination (Written) Preparation Seminar. This is a notice for the UT Level 2 New Primary Examination Written Test Preparation Seminar led by the renowned Sonagen Engineer Shojo, known as a charismatic teacher in UT seminars. Due to the high popularity of Shojo's passionate seminars, we recommend making reservations early. Registration is on a first-come, first-served basis, so please apply as soon as possible. To apply, please download the PDF for the Spring 2025 New Primary Examination (Written) Preparation Seminar, review it, and apply directly to the organizer.

This is a preparatory seminar for the NDI Autumn Contract Examination (September 21, September 22). It will be held by the Western Japan Branch of the Japan Non-Destructive Testing Association. 1. Venue: L Osaka (Osaka Prefectural Labor Center) 3-14 Kitahama Higashi, Chuo Ward, Osaka City, Osaka Prefecture, 540-0031 TEL: 06-6942-0001 2. Access: 300 meters west from Tenmabashi Station on the Osaka Metro Tanimachi Line and Keihan Electric Railway. 500 meters east from Kitahama Station on the Osaka Metro Sakaisuji Line and Keihan Electric Railway. 3. Date of the event: (UT Level 2) Other examination qualifications will also be conducted. September 7, 2024 (Saturday) Course hours are from 9:00 AM to 5:00 PM, with approximately 12 participants per subject. 4. Items to bring: Course application form (with reception stamp) Level 2 textbook (edited by the Japan Non-Destructive Testing Association) Writing utensils, scientific calculator 5. Application method and deadline, course fee: Please apply using the "Course Application Form" from the Association's website. Application deadline: August 22, 2024 (Thursday), but will close as soon as the capacity is reached. Course fee: Association members: 6,000 yen, Non-members: 8,000 yen.

This is information about a training session for the Ultrasonic Testing Level 1 examination (theoretical part). The Japan Non-Destructive Testing Industrial Association, Eastern Japan Branch, will hold an autumn Level 1 examination training session in Tokyo as detailed below. 1. Training Venue: Japan Non-Destructive Testing Industrial Association 2-8-1 Tomitaka Building, Uchikanda, Chiyoda-ku, Tokyo 101-0047 TEL: 03-5207-5960 FAX: 03-5207-5961 2. Access: 5-minute walk from the west exit of JR Kanda Station 3. Dates: (UT Level 2) Other examination qualifications will also be offered. From September 2 (Monday) to September 3 (Tuesday), 2024, with class hours from 9:30 AM to 4:30 PM. For information on course fees and other details, please check the association's website or the attached PDF guide.

This is a practical training course for the re-certification examination of Ultrasonic Testing (UT) Level 1 and Level 2 technicians. It is aimed at those taking the re-certification examination from August 21 to 25. The Chiba Prefecture Non-Destructive Testing Research Association and the Chiba Prefecture Steel Frame Industry Association are co-hosting a practical training course for re-certification candidates for NDI certification qualifications UT Level 1 and Level 2, in accordance with JIS Z 2305: 2013, as detailed below. 1. Target Participants: Candidates for the re-certification examination held in the Tokyo area from August 21 to 25. 2. Training Venue: Chiba City, Inage Ward, Tendai 6-13-1 Chiba Prefectural Industrial Support Technology Research Institute, 1st Floor Conference Room. 3. Dates of the Event: From August 5 (Monday) to August 7 (Wednesday), 2024. Training hours are from 9:00 to 16:20. A total of 8 participants for Level 1 and Level 2 combined; however, Level 1 will be conducted over 2 days. For information on participation fees and other details, please check the research association's website or the attached PDF guide.

The first and second re-certification exams are scheduled for the end of August 2024. ⚫️ Eligibility for the re-certification exam 　・For those whose qualification is valid until March 31, 2025, they are eligible to take the first re-certification exam (initial). 　　*This applies to those who have applied to take the re-certification exam in April of this year. 　・For those whose qualification is valid until September 30, 2024, they are eligible to take the second re-certification exam. 　　*Eligible candidates are those who failed the re-certification exams conducted in late February and late May of this year. Venue: Polytechnic Center Kansai (Kansai Vocational Ability Development Promotion Center), Settsu City, Osaka Prefecture We are pleased to announce a practical exam preparation seminar conducted by the renowned Sonai Engineer Shojo, known as a charismatic instructor in the UT training course. This seminar will take place over three days from July 30 to August 1. Due to the high popularity of Shojo's passionate seminars, early reservation is recommended. To apply, please download the practical training seminar information PDF below, review it, and apply directly to the organizer. Please note that the application deadline is July 24, 2024 (Wednesday) by 5:00 PM.

We would like to inform you about the Autumn UT Level 2 Academic (1st) Exam Preparation Course. Politec Center Kansai (Kansai Vocational Ability Development Promotion Center), Settsu City, Osaka Prefecture. This is an announcement for the UT Level 2 Academic (1st) Exam Preparation Course led by the renowned Sonai Engineer Shoujou, known as a charismatic instructor in UT courses. This time, the course will be held over a total of 6 days, from July 7th to 9th and July 14th to 16th. Due to the high popularity of Shoujou's passionate courses, early reservation is recommended. Please download the PDF for the practical training course information below, review it, and apply directly to the organizer. The application deadline is until 5 PM on Thursday, July 4, 2024.

This is information about the ultrasonic flaw detector handling training session. As of April 25, 2024, there are openings available. Japan Welding Engineering Center May 15 (Wednesday) to May 16 (Thursday) - 2 days, UT Level 1, 12 participants each for R and G June 4 (Tuesday) to June 6 (Thursday) - 3 days, UT Level 2, 12 participants each for R and G In the practical training session, we aim to provide instruction that closely resembles the actual practical examination, with the goal of having all participants pass. Additionally, for Level 2 candidates, we will also provide guidance on the preparation of NDT instructions. Furthermore, during the ultrasonic training session, practical instruction will be conducted using the same digital flaw detectors that will be used in the practical examination, so please fill in the type name of the flaw detector (G type or R type) you applied for on the application form for this training session. For information on participation fees and other details, please check the Japan Welding Engineering Center website.

This is information about a training session for practical exams on ultrasonic flaw detectors. A practical training session will be held, co-hosted by the Chiba Prefecture Non-Destructive Testing Research Association and the Chiba Prefecture Steel Frame Industry Association, targeting new candidates (those who passed the first exam in the spring of Reiwa 6) and those taking re-exams or re-certification for the NDI certification qualification UT Level 2 in accordance with JIS Z 2305: 2013. 1. Target Participants: Those planning to take the new or re-certification practical exams conducted by JSNDI in the Tokyo area in June. 2. Training Venue: 1st Floor Conference Room, Chiba Prefectural Industrial Support Technology Research Institute, 6-13-1 Tendai, Inage-ku, Chiba City. 3. Dates: From June 3 (Monday) to June 5 (Wednesday), Reiwa 6, with training hours from 9:00 to 16:20. For information on participation fees, please check the research association's website or the attached PDF guide.

We would like to inform you about the practical training course for the new and re-certification (renewal) of Level 2 Ultrasonic Testing (UT) examinations. This is a practical training course for the UT Level 1 examination, conducted by the renowned Sonar Engineer Shojo, who is known for his high pass rates and enthusiastic instruction. Due to the high popularity of Shojo's passionate courses, early reservation is recommended. Please download the practical training course information PDF below, review it, and apply directly to the organizer.

Non-Destructive Testing Comprehensive Exhibition 2023 July 26 (Wednesday) - 28 (Friday), 2023, 10:00 AM - 5:00 PM Tokyo Big Sight, East Exhibition Hall, Hall 5 Admission Fee: Free (Pre-registration required) Organizer: Japan Non-Destructive Testing Industry Association Special Sponsor: Japan Non-Destructive Testing Association Inspection Demonstration with Our Products Remote Condition Monitoring Using Ultrasonic Flaw Detectors - Demonstration of Ultrasonic Axial Force Measurement via Remote Control Various Ultrasonic Testing Devices

We would like to inform you about the Autumn UT Level 2 Practical Exam Preparation Course. This event will be held under the auspices of the Osaka Prefecture Steel Construction Industry Cooperative Association. This is an announcement for the UT Level 2 Practical Exam Preparation Course led by the renowned Sonai Engineer Shojo, known as a charismatic instructor in UT training. Among the 40 participants who passed the secondary exam in the spring of the fourth year, 31 achieved a pass rate of 78%, which is significantly higher compared to the average pass rate of candidates (below 30%). Due to the high popularity of Shojo's passionate courses, early reservation is recommended. In order to maintain a focused and dense content, the capacity for this course is limited to 35 participants, and it seems that a considerable number of reservations have already been made. As it operates on a first-come, first-served basis, please apply as soon as possible. To apply, please download the practical training course announcement PDF below, review it, and apply directly to the organizer. Please note that the application deadline is Tuesday, October 25, 2022, by 5:00 PM.

JIMA2022 11th Comprehensive Inspection Equipment Exhibition September 14 (Wednesday) - 16 (Friday), 2022, 10:00 AM - 5:00 PM Tokyo Big Sight, West Hall 1-2 Admission Fee: Free (Registration Required) Organizer: Japan Inspection Equipment Manufacturers Association Main Exhibits Demonstration of Ultrasonic Axial Force Measurement Control Device Remote-Compatible Flaw Detection Demonstration Various Ultrasonic Flaw Detection Devices

This is information about a training seminar on ultrasonic flaw detectors. The Japan Welding Engineering Center will hold a handling seminar for UT flaw detectors over two days from October 27 to 28. This seminar focuses on the operation of ultrasonic flaw detectors, aimed at those who are seeking to obtain qualifications for ultrasonic testing in response to requests from various sectors. Participants will receive practical training in operating the flaw detectors (using 6 units each of R-type and G-type) under the guidance of experienced instructors. This seminar will be prioritized for those who have taken or passed the first examination of JSNDI. Additionally, a preparatory seminar for the second examination is scheduled to be held just before the autumn qualification examination in 2021. For information on participation fees and other details, please check the Japan Welding Engineering Center's website.

This is information about a training session for practical exams on ultrasonic flaw detectors. A practical training session will be conducted for new and re-examinees of the NDI certification qualification UT Level 2, in accordance with JIS Z 2305: 2013, co-hosted by the Chiba Prefecture Non-Destructive Testing Research Association and the Chiba Prefecture Steel Frame Industry Association. 1. Target Participants: - Those taking the new secondary examination or re-examination at the Tokyo venue for the autumn 2021 certification exam. - Those taking the re-certification exam at the Tokyo venue in December 2021. 2. Training Venue: 1st Floor Conference Room, Chiba Prefectural Industrial Support Technology Research Institute, 6-13-1 Tendai, Inage-ku, Chiba City. 3. Dates: Level 2 (2 days) From November 29 (Monday) to December 1 (Wednesday), 2021. Training hours are from 9:00 to 16:20. For information on participation fees, please check the research association's website or the attached PDF guide.

This is information about a training session for practical exams on ultrasonic flaw detectors. A practical training session will be held, co-hosted by the Chiba Prefecture Non-Destructive Testing Research Association and the Chiba Prefecture Steel Structure Industry Association, targeting new and re-examinees for the NDI certification qualification UT Level 1 in accordance with JIS Z 2305: 2013. 1. Target Participants: - Those taking the new secondary examination or re-examination at the Tokyo venue for the certification exam in the fall of 2021. - Those taking the re-certification exam at the Tokyo venue in December 2021. 2. Training Venue: Chiba City, Inage Ward, Tendai 6-13-1 Chiba Prefectural Industrial Support Technology Research Institute, 1st Floor Conference Room 3. Date of Event: Level 1 (2 days) From November 25, 2021 (Thursday) to November 26, 2021 (Friday), with lecture hours from 9:00 to 16:20. For information on participation fees, please check the research association's website or the attached PDF guide.

We would like to inform you about the Autumn UT Level 2 Practical Exam Preparation Seminar, which will be held at Sona Engineer. This is an announcement for the UT Level 1 Practical Exam Preparation Seminar conducted by the renowned Sona Engineer representative, Shoujou, who is known as a charismatic instructor in UT training. *Please note that this time the venue is in Amagasaki City, Hyogo Prefecture. According to the results of the Spring and Autumn Secondary Exams conducted last year, the pass rate for participants was high and well-regarded. In the Spring Secondary Exam of the third year, the pass rate reached an impressive 86%. Results of the third year Spring Secondary Exam: 21 examinees ⇒ 18 passed (86%) Results of the second year Autumn Secondary Exam: 33 examinees ⇒ 25 passed (75%) Due to the high popularity of Shoujou's passionate seminars, early reservations are recommended. Although we are planning to accommodate 30 participants, it seems that many reservations have already been made. As it will be on a first-come, first-served basis, please apply early. To apply, please download the practical seminar information PDF below, review it, and apply directly to the organizer.

We would like to announce the Spring UT Level 2 Practical Exam Preparation Workshop. This is a practical exam preparation workshop for Level 2 conducted by the renowned Son Engineer Shoujou, known as a charismatic instructor of the UT workshop. According to the results of last year's spring and autumn second exams, the pass rate for participants was highly praised. Results of the second spring exam of Year 2: 32 examinees ⇒ 24 passed (75%) Results of the second autumn exam of Year 2: 33 examinees ⇒ 25 passed (76%) Due to the high popularity of Shoujou's passionate workshops, early reservations are recommended. To apply, please download the practical workshop information PDF below, review it, and apply directly to the organizer.

This is information about a training course for ultrasonic flaw detectors. The Japan Welding Engineering Center will hold a handling training course for UT flaw detectors over two days from April 27 to 28. This course is focused on the operation of ultrasonic flaw detectors, aimed at those who wish to obtain certification for ultrasonic testing in response to requests from various sectors. Participants will receive practical training using actual flaw detectors (6 units each of R type and G type) under the guidance of experienced instructors. This course will be prioritized for those who have taken or passed the first examination of JSNDI. Additionally, a preparatory course for the second examination of the 2021 spring qualification exam is scheduled to be held just before the exam. For information on course fees and other details, please check the Japan Welding Engineering Center's website.