Disaster response jack: Can be raised and lowered manually or with a rechargeable electric tool without power!
The work can be raised and lowered, and it holds the load at the stopped position! This is a disaster prevention rack jack that can be operated manually or with a commercially available electric screwdriver. It can be used even during a power outage!
This is a compact and lightweight rack-type jack (linear actuator) equipped with our company's self-locking mechanism (Shoji-Lock). It holds the load in place while raising and lowering the workpiece. Additionally, it can be restarted from any position without releasing the brake, whether in the upward or downward direction. Due to its lightweight and compact design, it saves space and has been widely adopted and well-received in various fields. Unlike conventional screw jacks, the rack type offers overwhelmingly faster ascent and descent speeds, characterized by its high efficiency and ease of operation. In addition to the manual-only (SLM series) models, there are also electric models (SLE series) that can be driven by power tools like drill drivers. The surface comes standard with a black Teflon coating that is resistant to rust. It can be widely used for disaster preparedness, energy-saving measures, and defense or military applications. It is also suitable for universities, research institutes, and testing facilities. As shown in the photos and videos, when mounted on a lab jack or table lifter, it can hold its position while loaded and resume lifting or lowering seamlessly by simply turning the handle again. It is compatible with commercially available round rack rods (manufactured by KHK). (Rack rods are not included.)
basic information
【Lineup】 SLM (Manual Only) Series Available for load capacities of 50/100/200/400 kg Comes with a dedicated handle Commercially available round rack bars (KHK brand) can be used. (Rack bars are not included) Available in T type with guide bars for buckling prevention, and D type that can connect two units in parallel. SLE (Electric Tool Assist) Series Uses commercially available electric drill drivers (Note: impact drivers are not allowed) to raise and lower the workpiece. Similarly, it holds the load at the position where the driver is stopped. Restarting is also possible without motion. The input shaft tip is hexagonal to accommodate commercially available sockets, and of course, it can also be used manually. *Dedicated handle is optional Available for load capacities of 100/200/400 kg For detailed specifications, please refer to the Ipros product information, our company website, or catalog.
Price information
For more details, please contact us.
Delivery Time
Applications/Examples of results
Semiconductor manufacturing line Aluminum manufacturing line Automobile manufacturing line Control panel cover opening and closing device Chair lifting device University experimental equipment, etc. Defense and military-related
Detailed information
-
Overwhelming advancement! It can raise and lower the rack rod by 11.5 mm in one rotation, and it's compact! Of course, it holds the load when stopped. SLW-100-11.5-20
-
This is a round number linear jack. In the case of SLM-050-4.0, it raises and lowers exactly 4mm per rotation. In the case of SLM-200-3.0, it raises and lowers exactly 3mm per rotation. Due to its compact size, it can be installed in tight spaces. It has many applications, such as simple lifting in places without power.
-
Dual rack synchronization is also possible. By connecting with a connecting pipe as shown in the image, turning the handle allows the rack rods to rise and fall simultaneously. It can be designed quite compactly.
-
The lineup also includes models with guide rods. Adopted for experimental equipment in a certain university laboratory. If you are concerned about the buckling of the rack rods, we recommend the twin shaft type.
-
Electric Tool Assist Type SLE Series Compatible with commercially available high-torque electric screwdrivers (impact drivers cannot be used) with a hexagonal tip specification. Enables work in locations without power supply.
-
Adopted by a certain heavy industry manufacturer for defense and military applications. Due to outdoor use, overall black chromate treatment. Used in the tilting parts of the equipment. Supports 400 kg. Compatible with rack rods of Φ30.
Related Videos
Line up（8）
| Model number | overview |
|---|---|
| SLM-050-4.0 | For manual use up to 50kg. Size 40 square, rack diameter Φ10, advance per rotation 4.0mm. |
| SLM-100-3.2 | For manual use up to 100kg. Size 50 square, rack diameter Φ15, advance per rotation 3.2mm. |
| SLE-100-0.56 | For manual and electric tool drive type up to 100kg. Size 50 square, rack diameter Φ15, advance per rotation 0.56mm. Hexagonal tip. |
| SLM-200-3.0 | For manual use up to 200kg. Size 70 square, rack diameter Φ20, advance per rotation 3.0mm. |
| SLE-200-1.1 | For manual and electric tool drive type up to 200kg. Size 70 square, rack diameter Φ20, advance per rotation 1.1mm. Hexagonal tip. |
| SLM-400-0.8 | For manual use up to 400kg. Size 90 square, rack diameter Φ25, advance per rotation 0.8mm. |
| SLE-400-1.1 | For manual and electric tool drive type up to 400kg. Size 90 square, rack diameter Φ25, advance per rotation 1.1mm. Hexagonal tip. |
| SLW-100-11.5 | For manual high-speed lifting type up to 100kg. Size 90 square, rack diameter Φ20, advance per rotation 11.5mm. |
catalog（2）
Download All Catalogs
CAD data（11）
| Model number | overview | File |
|---|---|---|
| SLM-050-4.0 | Manual-only rack jack, load capacity 50 kg, rack rise 4.0 mm per revolution, reduction ratio 11, round rack diameter 10 mm. |
|
| SLW-100-11.5-20 | Manual-only rack jack, high-speed lifting type, load capacity 100 kg, rack rise 11.5 mm per rotation, reduction ratio 12, round rack diameter 20 mm. |
|
| SLM-100D-3.2 | Manual-only rack jack SLM-100 can be used in conjunction with two units, with a load capacity of 200 kg. Rack elevation is 3.2 mm per rotation, with a reduction ratio of 16, and round rack diameter is Φ15. The connection part will be designed and manufactured by the customer. |
|
| SLM-200-3.0 | Manual-only rack jack, load capacity 200 kg, rack rise 3.0 mm per rotation, reduction ratio 23, round rack diameter 20 mm. |
|
| SLM-100-3.2 | Manual-only rack jack, load capacity 100 kg, rack rise 3.2 mm per rotation, reduction ratio 16, round rack diameter 15 mm. |
|
| SLE-400-1.1 | Manual/Electric Tool Assist Rack Jack, Load Capacity 400 kg, Rack Rise 1.1 mm per Revolution, Reduction Ratio 78, Round Rack Diameter 25 mm, Hexagonal Tip Specification. |
|
| SLM-400-0.8 | Manual-only rack jack, load capacity 400 kg, rack rise 0.8 mm per rotation, reduction ratio 108, round rack diameter 25 mm. |
|
| SLE-100-0.56 | Manual/Electric Tool Assist Rack Jack, Load Capacity 100 kg, Rack Rise 0.56 mm per Revolution, Reduction Ratio 93, Round Rack Φ15, Hexagonal Tip Specification. |
|
| SLE-200-1.1 | Manual/Electric Tool Assist Rack Jack, Load Capacity 200 kg, Rack Rise 1.1 mm per Revolution, Reduction Ratio 63, Round Rack Φ20, Hexagonal Tip Specification |
|
| SLM-400D-0.8 | Manual-only rack jack SLM-400 used in conjunction with two units, load capacity 800 kg, rack elevation 0.8 mm per rotation, reduction ratio 108, round rack diameter 25 mm. The connection part will be designed and manufactured by the customer. |
|
| SLM-200D-3.0 | Manual-only rack jack SLM-200 used in conjunction with two units, load capacity 400 kg, rack elevation 3.0 mm per rotation, reduction ratio 23, round rack diameter 20 mm. The connection part will be designed and manufactured by the customer. |
|
