太洋テクノレックス 本社　和歌山 Official site

Final Appearance Inspection System: Achieve even higher inspection quality with enhanced peripheral devices! (Inspection equipment, AI systems, verification systems, PC for inspection data creation)

Final Appearance Inspection of Substrates Appearance Inspection Equipment AI System Verification Station Confirmation System PC for Inspection Data Creation

An extremely user-friendly manual device! The optical resolution is 5 or 10μm, compatible with various substrates! Package, module-type substrates, FPC, ceramics.

【Product Specifications (Excerpt)】 ■ Model: M105SC ■ Board Size (mm): Up to 280(250)×330 ■ Board Thickness (mm): 0.1–2.4 ■ Camera Type: Color Line Sensor Camera (7.3K or 16K) ■ Camera Angle: Switchable in 3 stages ■ Resolution: 5μm / 10μm (Standard) / 15μm / 20μm ■ Light Source: White LED (Adjustable light intensity for each inspection data) *For more details, please refer to the PDF document or feel free to contact us.

High resolution, high functionality, high detection! The desired features are condensed into a specification adapted for package substrates, allowing for detailed settings to match the inspection standards of various companies!

**Product Specifications (Excerpt)** ■ Model: A307DC ■ Board Size (mm): 45×50 to 200×300 ■ Board Thickness (mm): 0.2 to 2.0 ■ Camera Type: 16,000 Pixel Color Line Sensor Camera ■ Camera Angle: Switchable in 3 Stages ■ Resolution: 5μm / 10μm (Standard) ■ Light Source: White LED (Adjustable Light Intensity for Each Entry) ■ Power Supply: AC 200/208/220/230V ±10% Three-phase 50/60 Hz 30A ■ Device Size (mm): 2248(W)×1687(D)×1987(H) (Operational) *For more details, please refer to the PDF document or feel free to contact us.*

We won't miss any minor defects! We will combine according to your requests and propose equipment with specifications suitable for you.

【Specifications】 ■Board size (mm): up to 305×510 ■Board thickness (mm): 0.1–2.4 ■Camera type: Color line sensor camera (7.3K or 16K) ■Camera angle: 3-stage switchable ■Resolution: 5μm / 10μm (fixed at shipment) ■Light source: White LED (adjustable light intensity for each entry) ■Power supply: AC 200–230V ±10% single phase 50/60 15A ■Device size (mm): 1131(W)×1430(D)×1542(H) (main body during operation) *For more details, please refer to the PDF document or feel free to contact us.

Attention companies struggling with final appearance inspection of PCBs! The solution to your problem is "TY-VISION XAIS"! 【Final PCB Appearance + AI System】

【Equipment Configuration and Inspection Flow at the Time of XAIS Introduction】 1. AVI - Conduct inspections using pre-created inspection data - Send information about detected defects to XAIS 2. XAIS - Automatically categorize defects detected by AVI into "Good (PASS)" and "Needs Verification (VERIFY)" - Only the information marked as "Needs Verification (VERIFY)" is sent to VERIFY 3. VERIFY - Inspectors verify only the locations marked as "Needs Verification (VERIFY)" received from XAIS and make the final judgment