ティックコーポレーション 本社 Official site

The spray nozzle newly developed by Lehira! A suitable spray nozzle is essential for producing powders!!

Lechler DryMASTER Standard Type and Type with Check Valve 【Technical Data】 - Combination of 900 types of orifice disks and chambers is possible - Flow rate range: 10~12,000 lit/h - Maximum operating pressure: 46.5MPa at 20℃ (theoretically possible up to 100MPa) - Maximum operating temperature: 250℃ - Spray angle: 50~110℃ - Particle size distribution: 30μm~220µm Lechler DryMASTER Low Flow Type - Combination of 60 types of orifice disks and chambers is possible - Flow rate range: 0.27~4.2 lit/h - Maximum operating pressure: 46.5MPa at 20℃ (theoretically possible up to 100MPa) - Spray angle: 30~90℃ - Particle size distribution: 30μm~220µm ◇◆Additionally, it is possible to provide with a polynomial and nozzle lance◇◆

In addition to the ≪Lechler≫ rotary tank cleaning nozzle, we also offer fixed spray balls! A comprehensive lineup is available!

【Lineup】 ○ Miniature nozzles for barrels and drums made of stainless steel → Precision rotating nozzle 500.234 series (smallest size) → Ultra-small rotating nozzle 566 series ○ Miniature nozzles for barrels and drums → Mini Whirly (rotating type) 500.186 series → Ultra-small rotating nozzle 500.191 series ○ MicroSpinner/MiniSpinner 5MC/5MI series ○ FoamWhirly 594/595 series ○ Rotating nozzle 569 series ○ Teflon rotating nozzle, especially for CIP 573/583 series ○ ACCU Clean made of stainless steel 515 series ○ High Impact Tank Cleaning Machine 5TM series ○ Static spray balls 527/540/541/591 series ○ Pop-up nozzle 5P2/5P3 series ○ Gyro nozzle 577/579 series ○ Hygienic Whirly 594/595 series ○ XactClean 5W2/5W3 ○ IntenseClean Hygienic 5TA/5TB/5TM series

Recommended for water-saving and energy-saving measures! Complies with hygiene and explosion-proof standards. Materials featuring installation examples available. For the food, beverage, and medical fields.

In industries that require tank cleaning, there are nozzles that cannot be used unless they meet various strict conditions. - 3A Sanitary Standards - EHEDG (European Hygienic Engineering and Design Group) - FDA (U.S. Food and Drug Administration) - regulation (EC) no. 1935/2004 - ATEX directive (explosion-proof specifications) As such, regulations are very strict in Europe and the United States. The German manufacturer Lechler provides nozzles that comply with these standards. Please make use of our spray nozzles for tank cleaning. We have prepared an LP that shows the cleaning effectiveness and efficiency by class. https://ticjapan.com/news/news-1282/ *Accessible from our company blog. For case studies, please refer to the URL below. https://tic-spray-solution.com/case-study/ *For more details, please refer to the materials. Feel free to contact us with any inquiries.

Efficiently cleaning cosmetic ingredient mixing tanks to achieve water conservation and energy savings.

【Features】 - There are five class settings based on cleaning power, allowing for selection according to the intended use. - Rotary cleaning nozzles of class 2 and above are designed for low pressure, achieving energy savings and reduced wear. - A cleaning head lubricated with cleaning solution is adopted to enhance durability. - The free-spinning head series lifts dirt with strong impact and washes away tank contaminants. - The internal drive control series exhibits powerful spray effects suitable for large tank cleaning. 【Our Strengths】 - Implementation of tests on a PC using software for "visualization" before actual machine testing. - Proposals for optimal cleaning nozzles tailored to the customer's tank size, shape, and purpose. - Provision of nozzles compliant with strict Western standards such as 3A Sanitary Standards, EHEDG, and FDA. - A system that allows for easy inquiries.

Streamlining residue removal in tank cleaning within the chemical industry.

【Features】 * Rehira Corporation has established a five-level classification based on cleaning power. * Rotary cleaning nozzles of class 2 and above achieve energy savings and reduced wear with low-pressure specifications. * Utilizes a cleaning head lubricated with cleaning solution. * Free-spinning head series that lifts dirt through strong repetitive impacts. * Internal drive control provides a powerful spray effect suitable for large tank cleaning. 【Our Strengths】 * Pre-testing within a PC is possible through visualization using software. * Proposes optimal cleaning nozzles tailored to the size, shape, and purpose of the tank. * Provides nozzles compliant with strict Western standards such as 3A Sanitary Standards, EHEDG, FDA, regulation (EC) no.1935/2004, and ATEX directive (explosion-proof specifications). * Offers a wide range of energy-saving and production improvement products, including air nozzles for compressed air, precision spray nozzles, and blower-type air knife systems.

Achieving efficiency and energy savings in the pigment dispersion process through water conservation from tank cleaning.

【Features】 - There are five class settings based on cleaning power, allowing for the selection of the optimal nozzle for specific applications. - Rotary cleaning nozzles of class 2 and above are designed for low-pressure use, reducing energy consumption and wear. - The free-spinning head series effectively removes dirt through repeated strong impacts. - The internal drive control series provides a powerful spray effect suitable for cleaning large tanks. - Fixed cleaning nozzles are also available, accommodating small tanks. 【Our Strengths】 - Visualization using software allows for simulation on a PC before actual machine testing. - We propose the optimal cleaning nozzle tailored to the customer's tank size, shape, and purpose. - We offer products that comply with strict Western standards such as 3A Sanitary Standards, EHEDG, FDA, and ATEX directives.

Achieving efficiency in tank cleaning and hygiene management in food manufacturing!

【Features】 - Five levels of class settings based on cleaning power - Energy-saving and longevity through low-pressure specifications and cleaning liquid lubrication - Powerful cleaning capability with a free-spinning head - Efficient cleaning of large tanks through internal drive control - Compatibility with various tank sizes and shapes 【Our Strengths】 - Simulation before actual machine testing within the PC - Proposal of optimal nozzles tailored to customer needs - Provision of products that comply with stringent standards in Europe and the United States

Water-saving through tank cleaning achieves both hygiene management and energy conservation in the food and beverage industry.

【Features】 - There are five class settings based on cleaning power, allowing for the selection of the optimal nozzle according to the application. - Rotary cleaning nozzles of class 2 and above are designed for low pressure, reducing energy consumption and wear. - The free-spinning head effectively lifts dirt with strong repetitive impacts and washes it away. - Internal drive control allows the liquid flow to power the turbine head, providing a powerful spray effect, suitable for large tank cleaning. - Fixed cleaning nozzles are also available, accommodating the cleaning of relatively small tanks. 【Our Strengths】 - Conducting preliminary tests on a PC using software for "visualization" before actual machine testing. - Proposing the optimal cleaning nozzle tailored to the customer's tank size, shape, and purpose. - Providing products that comply with strict Western standards such as 3A Sanitary Standards, EHEDG, and FDA. - Please feel free to consult us from inquiries to the proposal of the optimal product.

Would you like to enhance quality control with tank cleaning that supports thorough sterilization?

【Features】 - There are five class settings based on cleaning power, allowing for the selection of the optimal nozzle for specific applications. - Rotary cleaning nozzles of class 2 and above achieve energy savings and reduced wear with low-pressure specifications. - The free-spinning head series effectively removes dirt through repeated strong impacts. - The internal drive control series delivers powerful spray effects suitable for large tank cleaning. - We provide products that comply with strict hygiene standards in Europe and the United States (such as 3A Sanitary Standards, EHEDG, FDA, etc.). 【Our Strengths】 - Implementation of PC-based tests before actual machine testing through visualization using software. - Proposals for optimal cleaning nozzles tailored to the size, shape, and purpose of the tank. - Flexible responses tailored to customer requests.

Would you like to save energy by conserving water through tank cleaning?

In industries that require tank cleaning, there are nozzles that cannot be used unless they meet various strict conditions. - 3A Sanitary Standards - EHEDG (European Hygienic Engineering and Design Group) - FDA (U.S. Food and Drug Administration) - regulation (EC) no. 1935/2004 - ATEX directive (explosion-proof specifications) As such, there is very strict management in Europe and the United States. The German manufacturer Lechler provides nozzles that comply with these standards. Please make use of them for tank cleaning spray nozzles. *For more details, please refer to the materials. Feel free to contact us as well.

The successor model of the best-selling tank cleaning product XactClean HP+.

Main Features: - Powerful flat jet nozzle insert - Threadless hygienic design - Compatible with Lechler HygienicFit (sanitary adapter) - Adaptable to sterilization processes (steam operation) - Operating temperature up to 150°C - Controlled low-speed rotating spray - High corrosion resistance - High surface quality (standard equipment) - Compliant with FDA and EC 1935/2004 - ATEX certified version available Functional Characteristics: The XactClean HP 2 series rotating tank cleaning nozzle is classified as Cleaning Efficiency Class 4 and is specially designed to effectively clean contaminants in the food and beverage industry, chemical industry, and pharmaceutical industry. The XactClean HP 2 achieves maximum cleaning efficiency at low pressure in small to medium-sized tanks. Thanks to the use of high-quality materials, this nozzle can operate at temperatures up to 150°C and is suitable for steam operation. Both CIP processes (clean-in-place) and SIP processes (sterilization-in-place) can be performed with this rotating tank cleaning nozzle.

Powerful cleaning jet! Consistently hygienic design! Reliability of the process! With a long lifespan, "MeshClean+" efficiently cleans stubborn dirt.

Please refer to the catalog for specifications and details.

The ≪Lechler≫ Spinner series (5Mx series) is the ultimate masterpiece! With its innovative slot design, it efficiently cleans the inside of the tank!

Main Features: • Made of 316L stainless steel, suitable for high-temperature environments (up to 250°C) • Stable rotation performance due to double ball bearing structure • Various flow rates and spray angle variations available • Suitable for explosive atmospheres (ATEX certified) • Compliant with food and pharmaceutical standards (EC No. 1935/2004 and FDA compliant) Technical Specifications: • Cleaning target diameter: 0.25 to 2.6m • Maximum operating temperature: 250°C • Recommended operating pressure: 2 bar • Filter specification: 0.1mm / 170 mesh • Installation orientation: Can be installed in any direction • Connection diameter: 1/2 BSPP and 3/4 BSPP (HygienicFit compatible)

High-impact, high-reliability control rotary cleaning nozzle! "Supports up to 9.6m," "High flow rate, high cleaning power," "Compatible with rotation monitoring sensors."

Technical Specifications: • Cleaning target diameter: 0.25 to 9.6m • Maximum operating temperature: 95°C • Recommended operating pressure: 3 bar • Filter specification: 0.3mm / 50 mesh • Installation orientation: All directions compatible • Bearing structure: Double ball bearing • Connection diameter: 1 BSPP, 1 1/4 BSPP, 1 1/2 BSPP (HygienicFit compatible) • Material: 316L stainless steel, PEEK, EPDM

Pneumatic control type protruding rotating nozzle specialized for automatic cleaning of ducts and cyclones: 'SIP compatible', 'usable under vacuum', 'compatible with horizontal and vertical structures'

Technical Specifications: Maximum operating temperature: 150°C (same for ambient temperature) Recommended operating pressure: 2 bar Starting pressure: approximately 1.6 bar / stopping pressure approximately 0.3 bar Material: 316L/316Ti stainless steel, PTFE, FKM or EPDM Bearing: slide bearing Surface roughness: external Ra ≤ 0.8μm / internal Ra ≤ 1.6μm Weight: approximately 2.2kg Installation direction: can be installed in any direction Others: self-draining design, compatible with drying air blow, sensor mountable

Air pressure-operated protruding and rotating sanitary design cleaning nozzle! After cleaning, it is stored in a sealed manner, making it ideal for the food, pharmaceutical, and chemical industries.

Technical Specifications: • Maximum operating temperature: 95°C • Maximum ambient temperature: 65°C • Recommended operating pressure: 2.5 bar • Flow rate: approximately 54 L/min at 2.5 bar • Installation orientation: all directions supported (horizontal and vertical) • Bearings: free-spinning rotor structure • Materials: 316L stainless steel, PEEK, EPDM or FKM • Additional features: air flush compatible, additional parts (nuts and nipples) available

Cleaning with effective flat jet nozzles. Explosion-proof specifications are also available.

【Specifications】 Rotary tank cleaning nozzle Series: 566 Angle: 180°, 360° Maximum tank diameter: 1.7m Material: Stainless steel / SUS316L, PEEK material Maximum temperature: 130°C (ATEX version: 90°C) Recommended operating pressure: 2bar [l/min] at p=2bar / 15 ? 21 Installation direction: All directions Standards: FDA, Regulation (EC) No. 1935/2004 and ATEX

Lechler foam spray is possible! It can be used in corrosive environments.

【Specifications】 Rotary tank cleaning nozzle Series: 500.191 Angle: 180°, 270°, 360° Maximum tank diameter: approximately 1m Material: PVDF Maximum temperature: 90°C Recommended operating pressure: 2 bar [l/min] at p=2 bar / 13 ? 20 Installation direction: all directions Standards: FDA, Regulation (EC) No. 1935/2004

Contributing to hygiene management in cosmetics manufacturing! Lehiller's tank cleaning nozzle.

【Features】 - Excellent cleaning efficiency: Achieved through optimization according to flow rate and pressure for efficient cleaning. - Diverse product lineup: Compatible with various tank shapes, from fixed to rotating types. - High durability: Provides stable cleaning performance over a long period. - Hygienic design: Nozzles used in the food and pharmaceutical industries maintain high hygiene standards. - Water-saving effect: Optimizes the amount of cleaning solution used, reducing waste. 【Our Strengths】 Tick Corporation supports the selection of the optimal nozzles tailored to customer needs. Based on extensive product knowledge and experience, we provide the best cleaning solutions.

For hygiene management in pharmaceutical factories! Balancing cleaning efficiency and durability.

【Features】 - Excellent cleaning efficiency - High durability - Diverse product lineup - Savings on water and cleaning solutions - Compatible with medium to large tanks 【Our Strengths】 Tick Corporation supports optimal product selection tailored to customer needs. Based on extensive product knowledge and experience, we contribute to solving customer challenges.

Support quality control in beverage production with Lehira's tank cleaning nozzle!

【Features】 - A design that combines excellent cleaning efficiency, durability, and cost-effectiveness - A diverse product lineup including fixed, freely rotating, controlled rotation, dual-axis controlled rotation, and telescopic types - Improved cleaning efficiency through optimization based on flow rate and pressure - Applicable to hygienic cleaning processes in food, pharmaceuticals, chemicals, and beer brewing - Capable of accommodating medium to large tanks through model selection 【Our Strengths】 Tick Corporation supports optimal product selection tailored to customer needs and provides comprehensive support from implementation to operation.

Lechler: The world's smallest nozzle! Its compact design allows for cleaning in tight spaces.

【Specifications】 Rotary tank cleaning nozzle Series: 500.234 Maximum tank diameter: within 1m Angle: 300° Connection size: M6 3/8 BSPF Material: Stainless steel / SUS316L Maximum temperature: 200°C Recommended operating pressure: 3bar [l/min] at p=3bar / 9.8 Installation direction: All directions Standards: FDA and Regulation (EC) No. 1935/2004 certified

Entry model nozzle for rotary tank cleaning!

【Specifications】 Rotary tank cleaning nozzle Series: 500.186 Recommended tank diameter: around 1m Angle: 300° Recommended operating pressure: 2bar [l/min] at p=2bar / 18 Connection size: 1/2 BSPF Material: POM, stainless steel / 316SS Maximum temperature: 50℃ Installation direction: downward

Lechler long-selling nozzle! It can accommodate a wide range of spray angles, flow rates, and connection options.

【Specifications】 Series: 569 Angle: 270°, 360° Maximum tank diameter: 3m Material: Stainless steel / SUS316L SS PEEK material Rulon 641 Maximum temperature: 140°C (ATEX version: 90°C) Recommended operating pressure: 2 bar Installation direction: All directions (ATEX version: vertical only) Standards: FDA, Regulation (EC) No. 1935/2004 and ATEX

The ≪Lechler≫ slip-on connection has obtained the 3-A standard. It is suitable for use in harsh corrosive environments.

【Specifications】 Rotary tank cleaning nozzle Series: 573/583 Maximum tank diameter: Approximately 3m Angles: 180°, 270°, 360° Maximum operating temperature: 95°C (a version up to 130°C can be produced upon request) Recommended pressure: 0.2MPa [l/min] at p=0.2MPa / 41 ? 225 Installation direction: All directions Standards: FDA, Regulation (EC) No. 1935/2004 and 3-A

The ≪Lechler≫ is a minimum tank cleaning nozzle with a length of approximately 30mm and an outer diameter of just φ9mm.

-

Gear-type tank cleaning nozzle! Capable of cleaning tanks up to 24m at low pressure!

Series: 5TM Angle: 360° Maximum tank diameter: 24m Material: SUS316L SS, PTFE, Carbon fiber Maximum temperature: 60°C (can be adapted up to 90°C upon request.) Recommended operating pressure: 0.5MPa Installation direction: All directions

"Lechler" unique pop-up nozzle! Installed at the same level as the wall surface. The nozzle in the rotating part pops out under pressure to perform cleaning.

【Specifications】 Series: 5P2/5P3 [l/min] at p=2bar / 14 ? 460 [l/min] at p=3bar / 17 ~ 563 Maximum tank diameter: Approximately 2.2m Material: Stainless steel / 316 SS Stainless steel / 316Ti SS (spring) Stainless steel / 316SS (snap ring) PEEK material / slide bearing FKM / (O-ring) Maximum temperature: 140℃ Recommended pressure: 2 bar 5P2 Opening pressure: Approximately 0.1MPa / Closing pressure: 0.5MPa 5P3 Opening pressure: Approximately 0.09MPa / Closing pressure: Approximately 0.05MPa Installation direction: All directions Standards: FDA and Regulation (EC) No. 1935/2004 certified

"Lechler" enables effective foam cleaning at low pressure!

【Specifications】 Series: 594/595 Series Angle: 360° Maximum tank diameter: Approximately 2.5m Material: Stainless steel / 316L SS PEEK material EPDM O-ring (EHEDG version) Maximum temperature: 100°C (short term: up to 140°C) Recommended operating pressure: 3bar Installation direction: All directions Standards: FDA, Regulation (EC) No. 1935/2004 and EHEDG

Powerful cleaning with a special shape nozzle from Lechler! This shape is unique to Lechler!

【Specifications】 Series: 577 Angles: 180°, 270°, 360° Maximum tank diameter: 5.5m Material: Stainless steel / 316L SS, PTFE Maximum temperature: 90°C Recommended operating pressure: 3bar Installation direction: Vertical Standards: Compliant with FDA and Regulation (EC) No. 1935/2004

The ≪Lechler≫ powerful straight spray cleans stubborn dirt stuck inside the tank!

【Specifications】 Series: 5TA Angle: 360° Maximum tank diameter: 12.3m Material: Stainless steel / 316L SS Stainless steel / 632 SS PEEK, PTFE, zirconia, EPDM Maximum temperature: 95℃ Recommended operating pressure: 0.5MPa Installation direction: All directions Standards: FDA, Regulation (EC) No. 1935/2004 and ATEX

The high-performance solid jet spray with Lechler gear control effectively removes stubborn dirt!

【Specifications】 Series: 5TB Maximum tank diameter: 15m Material: Stainless steel / 316L SS Stainless steel / 632 SS PTFE / PEEK material / Zirconium oxide / EPDM Maximum temperature: 95℃ Recommended pressure: 0.5MPa Installation direction: All directions Recommended filter: 80 mesh Weight: 4kg Standards: FDA, Regulation (EC) No. 1935/2004 and ATEX

Efficiently clean the tank with Lechler's innovative slot design!

Rotary Tank Cleaning Nozzle Series: 5MC Maximum Tank Diameter: Approximately 1.8m Angles: 60°, 180°, 360° Material: SUS316L / SUS440C [Hastelloy Specification: Hastelloy C22 / C276] Environmental Temperature: Up to 140°C Recommended Pressure: 0.2MPa Installation Direction: Any direction Recommended Filter: 170 mesh Acquired Standards: FDA, Regulation (EC) No. 1935/2004 and ATEX

Lecher: Efficiently cleans the tank with an innovative slot design!

Rotary Tank Cleaning Nozzle Series: 5MI Maximum Tank Diameter: 2.6m Angles: 60°, 180°, 360° Material: SUS316L / SUS440C [Hastelloy Specification: Hastelloy C22 / C276] Environmental Temperature: Up to 140°C Recommended Pressure: 0.2MPa Installation Direction: Any direction Recommended Filter: 170 mesh Obtained Standards: FDA, Regulation (EC) No. 1935/2004 and ATEX

"Lechler" is perfect for cleaning in limited spaces with its compact design!

Material: SUS-316L / SUS-440C 【Hastelloy Specification: Hastelloy C22 / C276】 Maximum Tank Diameter: Approximately 1.6m Ambient Temperature: Up to 140℃ Recommended Pressure: 0.2MPa Installation Direction: All Directions Recommended Filter: 170 Mesh Acquired Standards: FDA, Regulation (EC) No. 1935/2004 and ATEX

Lechler's tank cleaning spray nozzle PopUp Whirly now available in ATEX version (explosion-proof type).

It is installed horizontally within the wall and used. The rotating nozzle pops out from the housing at a certain water pressure. The PopUp Whirly is ideal for pipe cleaning and foam spraying. It is particularly used in the food and beverage industry, pharmaceutical industry, and chemical industry. The material used is mainly SUS316L. The recommended maximum tank diameter is up to 2m. The recommended pressure is 0.5MPa (typically 0.2MPa).

Finally here! High-pressure washing tank cleaning nozzle "PressureClean"

Features: - Thorough cleaning with a small amount of water and high pressure - Ideal for small tanks with the most stubborn dirt - Cleaning effect through precise omnidirectional straight jet - Equipped with an efficient, high-torque, and reliable 24V motor - Robust IP-65 certified housing for the drive unit - High-pressure lance with injection head - High corrosion resistance - Recommended operating pressure: 10MPa The lance length is available in three types: - 250 mm - 500 mm - 889 mm (adjustable flange) Flow rates by product model number: 10 l/min @ 10MPa – 5TP.469.1Y.XX 20 l/min @ 10MPa – 5TP.589.1Y.XX 30 l/min @ 10MPa – 5TP.659.1Y.XX

Achieving quality improvement and cost reduction through tank cleaning!

【Features】 - Five levels of classification based on cleaning power - Long lifespan due to low-pressure specifications and cleaning liquid lubrication - Powerful cleaning with a free-spinning head - Cleaning of large tanks through internal drive control - Compatibility with various tank sizes 【Our Strengths】 - Simulation before actual machine testing within the PC - Proposal of optimal nozzles tailored to customer needs - Abundant track record and expertise

We will improve the quality and safety of beverage production by optimizing tank cleaning.

【Features】 - Five-class settings based on cleaning power - Energy savings and extended lifespan due to low-pressure specifications and cleaning liquid lubrication - Powerful cleaning capability with a free-spinning head - Efficient cleaning of large tanks through internal drive control - Compatibility with various tank sizes and shapes 【Our Strengths】 - Visualization before actual machine testing within the PC - Proposals for optimal nozzles tailored to customer needs - Extensive product lineup - Support based on specialized knowledge

Achieve cost reduction in paint manufacturing through water-saving tank cleaning!

【Features】 - Five-class settings based on cleaning power - Energy savings and extended lifespan through low-pressure specifications and cleaning liquid lubrication - Powerful cleaning capability with a free-spinning head - Optimal spray effect through internal drive control - Compatibility with various tank sizes and shapes 【Our Strengths】 - PC-based testing before physical machine tests using software for "visualization" - Proposals for optimal nozzles tailored to customer needs - Extensive track record and specialized knowledge

Manufacturer's minimum rotation nozzle! Reliable cleaning even in narrow spaces! Supporting sterilization processes in the pharmaceutical field.

【Features】 - Powerful cleaning with a rotary solid jet - Made entirely of stainless steel (316L), excellent in hygiene and heat resistance - Extremely compact design allows for installation in tight spaces - Compliant with EU Regulation (EC) No. 1935/2004 and FDA 【Our Strengths】 Tick Corporation focuses on providing products that contribute to solving our customers' challenges. Leveraging years of experience and knowledge, we offer comprehensive support from selecting the optimal cleaning nozzle to post-installation assistance.

Efficient tank cleaning in chemical plants with high-precision and high-impact cleaning.

【Features】 - High-impact, uniform cleaning with a specially designed flat jet nozzle - Maximized cleaning efficiency through controlled low-speed rotation - Compliant with food and pharmaceutical standards (EC No. 1935/2004 and FDA) - Suitable for explosive atmospheres (ATEX certified) - Capable of all-direction operation 【Our Strengths】 Tick Corporation provides optimal products tailored to customer needs and supports improvements in production efficiency. Leveraging years of experience and expertise, we contribute to solving customer challenges.

Strongly support hygiene management in cosmetics manufacturing!

**Features** - Powerful cleaning capability with a high-impact flat jet nozzle - Uniform cleaning through controlled low-speed rotation - Materials and standards suitable for food and pharmaceuticals - Installation flexibility for all directions - Compatible with tank diameters of up to 8m **Our Strengths** Tick Corporation provides optimal product selection tailored to customer needs and support after implementation. Leveraging years of experience and expertise, we contribute to solving our customers' challenges.

"Lechler" cleans with high impact and uniformity. It enables very effective cleaning through rotational control.

【Specifications】 Series: 5S2/5S3 Angle: 180°, 270°, 360° Maximum tank diameter: 8m Material: Stainless steel / 316L SS Stainless steel / 316 SS Stainless steel / 632 SS PEEK, PTFE, Zirconia, EPDM Maximum temperature: 95℃ Recommended operating pressure: 0.5MPa Installation direction: All directions Standards: FDA and Regulation (EC) No. 1935/2004 compliant