Types of Antistatic Coatings and How to Choose Them | Safron

Prevent static electricity problems by discharging to the substrate or ground. Explanation of leakage resistance value guidelines and grade selection.

last updated Aug 20, 2026

Contract Processing of Surface Treatment | How to Choose Treatment Methods and Classification Map

A classification map of surface treatments derived from the desired functions, including an explanation of the distinctions between coatings and plating.

last updated Aug 20, 2026

Contract coating of medical device and pharmaceutical manufacturing equipment parts.

To the production sites of pharmaceuticals and medical devices where cleanliness is required. Proven track record from tablet press to transport equipment in sterile rooms.

last updated Aug 20, 2026

Teflon Coating Request Guide | How to Choose a Contractor, Costs, and Process

An explanation by a Kema's certified licensed processing manufacturer regarding the process of requests, cost considerations, and quality inspection.

last updated Aug 20, 2026

Differentiation and comparison between fluororesin and silicone coatings.

Comparison of heat resistance, release properties, and cleanability. Yoshida SKT, which processes both methods in-house, will explain the criteria for choosing between them.

last updated Aug 20, 2026

Coating processing of food machinery | Compliance with the Food Sanitation Act PL system

A fluororesin coating that complies with the revised Food Sanitation Act positive list system, solving sticking and burning issues.

last updated Aug 20, 2026

Corrosion protection coatings and fluororesin linings for chemical plants.

Corrosion protection for tanks, piping, and valves. Also, permeation-resistant PFA MY lining and on-site applied corrosion-resistant coatings.

last updated Aug 20, 2026

Contract processing of functional coatings | From consultation to testing and mass production

Break down the issues into 11 functions and propose the optimal surface treatment. You can quantify the selection through performance measurement services.

last updated Aug 20, 2026

Prototype 1 piece; contract for fluororesin coating from small lots.

We support not only mass-produced items but also individual parts of machines that exist only in one factory. From prototypes to mass production, we have a system of three factories nationwide.

last updated Aug 20, 2026

Differences and Selection of PTFE, PFA, FEP, and ETFE | Comparison by Application

Heat-resistant, corrosion-resistant, non-stick... A comparison of four types of fluoropolymer explained with data. Yoshida SKT supports selection for all types.

last updated Aug 20, 2026

For those troubled by wear on the conveyor guide of the packaging machine.

Reduce friction and guide wear during high-speed transport, minimizing product clogging and damage.

last updated Aug 20, 2026

For those struggling with sticking in vacuum forming molds.

Improvement of sheet adhesion and air release issues from surface shape.

last updated Aug 20, 2026

For those troubled by cutter residue on packaging film.

Reduction of cutting defects and misalignment due to adhesive adhesion, and reduction of release agent application work.

last updated Aug 20, 2026

For those troubled by seal adhesion issues with pillow packaging machines.

Reduce film and scorch adhesion, decreasing cleaning frequency and packaging line downtime.

last updated Aug 20, 2026

For those struggling with achieving both corrosion resistance and static electricity prevention.

Protecting the substrate from the liquid medication while also suppressing adhesion and discharge caused by static electricity.

last updated Aug 20, 2026

For those troubled by undercoating corrosion and blistering.

Suppresses the penetration of moisture and chemical solutions, reducing film swelling and substrate corrosion.

last updated Aug 20, 2026

For those troubled by internal corrosion of pharmaceutical piping.

Isolate the inner surface of the piping from the chemical solution to suppress corrosion thinning and metal leaching.

last updated Aug 20, 2026

For those troubled by chemical corrosion of stirring blades.

While utilizing the strength of the metal, long-term protection of the stirring blades from chemical solutions.

last updated Aug 20, 2026

For those troubled by scratches on the resin guide.

Reduce friction with the conveyed items and minimize scratches and wear particles on the resin guide.

last updated Aug 20, 2026

For those troubled by high sliding resistance of equipment.

Suppressing drive load due to friction, supporting operational stabilization and improving component lifespan.

last updated Aug 20, 2026

For those having trouble with non-lubricatable sliding parts.

Solid lubrication of internal components that are difficult to maintain, reducing lubrication work and friction.

last updated Aug 20, 2026

For those struggling with the transport resistance of rubber products.

Reduce the snagging caused by the high friction of rubber and ensure smooth transportation.

last updated Aug 20, 2026

For those troubled by resin adhesion on extrusion dies.

Reduce the adhesion of high-temperature molten resin and eye mucus, and decrease cleaning stoppages.

last updated Aug 20, 2026

For those troubled by adhesive stains on label applicators.

Suppress adhesive transfer and label jams, extending continuous operation time.

last updated Aug 20, 2026

For those struggling with paint removal from painting jigs.

Reduce stripping and cleaning, and create a jig surface that is less prone to paint buildup.

last updated Aug 20, 2026

For those who are troubled by food sticking to the shoot.

Improving the adhesion and retention of food that does not flow just by tilting or polishing from the surface.

last updated Aug 20, 2026

[Technical Q&A] Heat Resistance Temperature of MRS Coating

The heat-resistant grade MRS-004 can be used at 300°C under certain conditions.

last updated Aug 20, 2026

[Technical Q&A] Substrates compatible with MRS coating

Compatible with metals and ceramics. Low-temperature processing grades like MRS-230 are also suitable for resins.

last updated Aug 20, 2026

[Technical Q&A] Thickness of MRS Coating

The thin film grade MRS-014 is suitable for cutting tools and precision parts with minimal change to the surface shape.

last updated Aug 20, 2026

"MRS Coating" Industry-Specific Adoption Results - Packaging, Food, and Others

Achievements in seven industries: packaging, food, rubber and resin, printing, electronic components, automotive parts, and medical and pharmaceutical equipment.

last updated Aug 20, 2026