ファーステック Official site

Significant improvements in productivity through machining with an electromagnetic magnetic chuck that allows for simultaneous processing of multiple items and reduction of setup time! A collection of case studies is being offered!

■A cutting magnet chuck using very powerful neodymium magnets and Alnico magnets. ■Magnetization and demagnetization are performed using electrical power, but during magnetization, power supply is not required. ■As a result, power consumption is very low and energy-saving, and there is no increase in the temperature of the workpiece. ■Since power supply is not required during magnetization, there is no need for a power supply cable. ■Once the magnetic flux is fully absorbed by the workpiece, the magnetic flux does not emerge on the surface of the workpiece, and therefore, metal shavings are not attracted to the surface of the workpiece by magnetic force. ■By using an induction block (magnetic flux conductor), it can accommodate various shapes of workpieces. ■Using a distortion removal block makes it possible to remove the scale from distorted workpieces with black scale. *For more details, please refer to the PDF document or feel free to contact us.

Significant improvement in productivity through machining with permanent magnet clamping blocks that allow simultaneous processing of five sides and reduction of setup time!

■ Generates magnetic force ranging from 500kg to 2100kgf per two poles of a powerful neodymium magnet (varies by model). ■ Switching between magnetization and demagnetization is easy with lever operation. ■ The workpiece is held on one side due to magnetic attraction, making it ideal for five-sided machining. ■ Machining is completed in one process, which greatly helps in maintaining precision and improving machining efficiency. Applications: 1. Suitable for almost all machining of large to small workpieces. 2. Basically, use four permanent magnetic clamping blocks as a set. 3. For workpieces that are not flat where they contact the chuck, it is necessary to use separately sold induction block springs (deformation correction blocks) or induction blocks to ensure there is no gap between the chuck and the workpiece.

We will provide a collection of successful cases of improved productivity for free! With Mag Vise, it is possible to shorten setup time and process multiple items simultaneously.

**Features of Magnetic Vices** ■ There are two types: permanent magnetic clamping blocks and electromagnetic chucks. **Features of Permanent Magnetic Clamping Blocks** ■ A cutting magnetic chuck using very powerful neodymium magnets ■ Easy ON/OFF control of magnetic force with lever operation ■ Chucks can be linked together, and linked chucks can have their magnetic force turned ON/OFF with a single lever operation ■ Capable of clamping very large workpieces **Features of Electromagnetic Chucks** ■ A cutting magnetic chuck using very powerful neodymium and alnico magnets ■ Electricity is used only when turning the magnetic force ON/OFF ■ Once the magnetic force is ON, the power supply can be stopped and the cable can be removed ■ Since power supply is not needed while the magnetic force is ON, there is no increase in workpiece temperature **Common Features** ■ Once the magnetic flux completely enters the workpiece, it does not emerge on the surface, thus preventing chips from adhering to the workpiece surface ■ By using induction blocks (magnetic flux conductors), it can accommodate various shapes of workpieces ■ By using distortion removal blocks, it is possible to remove scale from distorted black skin workpieces ■ Wet processing is possible ■ Compatible with various workpiece sizes

Adopting a unique 1.5° swing on one side of the mouthpiece significantly enhances grip strength.

【Other Features】 ■ Equipped with grooves and clamp edges for direct installation on the table ■ Design allows for smooth discharge of chips and cutting fluid ■ TIN-coated spindle with excellent wear resistance ■ Vice body made of SKS3 with a hardness of HRC50 ■ Grooves for grippers to enhance automatic pickup and handling *For more details, please download the PDF or feel free to contact us.

Successful new approach to make the zero-point system easier, faster, and more effective!

【Fast Grip Self-Centering Vice】 ■ Minimal tool interference and very little gripping area ■ High clamping force of 16kN (when tightened to 100Nm) ■ Durable TIN coated vice spindle *For more details, please download the PDF or feel free to contact us.

X thinning grinder for diameters from 3mm to 20mm. Anyone can easily grind up to the second relief. Can also grind carbide drills by replacing with SDC wheels.

**Main Features** A drill sharpening machine that is easy to operate and can be used by anyone. **Features** - Capable of sharpening drills from 3.0mm to 20.0mm with a single unit. - Can also sharpen tapered drills. - Can sharpen drill bits with end mill shanks. - Holds drills securely with an ER collet. - Built-in bearings provide light operability and reduce processing time. - Not only can it create relief angles, but it can also sharpen secondary relief angles. - Sharpens split points (X thinning). - Allows selection of point angles from 85 degrees to 140 degrees. - High-performance motor enables continuous operation for one hour. - Comes standard with a detachable power cable. - Can be used with a household AC 100V power supply. - Size: L175 x W385 x H165mm. - Weight: 21kg. - The catalog includes other related products such as small and medium drill sharpening machines.

X grinding machine for diameters from 12 mm to 26 mm. Anyone can easily grind up to the second escape. With additional collets, it can grind from a minimum of 8 mm to a maximum of 32 mm.

**Main Features** An easy-to-use drill sharpening machine that anyone can operate. **Features** - Capable of sharpening drills from 12.0mm to 26.0mm with one machine. - With an additional collet (sold separately), it can sharpen drills from 8.0mm to 32.0mm. - Can also sharpen tapered drills. - Can sharpen drill bits with end mill shanks. - Holds drills securely with an ER collet. - Built-in bearings provide light operability and reduce processing time. - Not only can it create relief angles, but it can also sharpen secondary relief angles. - Sharpens split points (X-shining). - Allows selection of point angles from 85 degrees to 140 degrees. - High-performance motor enables continuous operation for one hour. - Comes standard with a detachable power cable. - Can be used with a household AC 100V power supply. - Size: L210 x W440 x H180mm. - Weight: 25kg. - The catalog includes other related products such as small and medium drill sharpening machines.

Lightweight and compact yet super powerful! The safety factor is 3.5 times. Choose from ultra-compact to super large capable of lifting 3000kg, tailored to your applications and conditions!

【Maximum Lifting Capacity (Flat Steel)】 ELM-100: 100kg ELM-300: 300kg ELM-600: 600kg ELM-1000: 1000kg ELM-2000: 2000kg ELM-3000: 3000kg 【Other Product Lineup】 ELM-L Series (Balance Board for Lever Hoisting) ELM-H Series (Balance Board for Large Flat Steel Hoisting) ELM-V Series (Equipment for Vertical Hoisting and Transport) *For more details, please refer to the materials. Feel free to contact us with any inquiries.