Multi-component dynamometer 9257B
Due to its very high rigidity and natural frequency, as well as excellent resolution, it is possible to measure even the dynamic changes of very small forces while a large force is acting!
A fixed cutting dynamometer that can measure orthogonal three-component forces during cutting and grinding processes. It is ideal for optimizing cutting conditions and monitoring cutting states. Despite its wide measurement range (Fx, Fy, Fz: ±5 kN), it has excellent dynamic resolution (0.01 N), allowing for the measurement of very small dynamic changes in force even when large forces are acting. ◇ Measurement range: ±5 kN, top plate: 100x170 mm
basic information
This dynamometer incorporates four three-component sensors with a large preload between the upper and lower plates. Each sensor contains three pairs of quartz plates, one of which responds to forces in the z-direction, while the remaining two respond to shear forces in the x and y directions, respectively. During the measurement of force components, there is almost no deformation of the dynamometer. To enable the measurement of multi-component forces and moments, the outputs of the four built-in force sensors are connected internally within the dynamometer. Eight signals are output from a 9-pin flange-type socket connector. The four force sensors are incorporated in a non-grounded manner, preventing noise from ground loops. This dynamometer is equipped with anti-corrosion and waterproof measures. By using connection cables of type 1687B5/1689B5, it can achieve a protection rating of IP67.
Price information
-
Delivery Time
Model number/Brand name
9257B
Applications/Examples of results
- Dynamic and quasi-static measurement of the three orthogonal components of force - Measurement of cutting and grinding forces during turning, milling, and grinding processes. It is also possible to accurately measure the minute machining forces during processing and grinding with small tools. - Wind tunnel models and other measurements - Ergonomics-related measurements
catalog（12）
Download All Catalogs
News about this product（4）
-
We will exhibit at Mechatrotech Japan 2023!
We are pleased to announce that we will be exhibiting at Mechatrotech Japan - MECT 2023, which will be held from October 18 to 21, 2023, at Port Messe Nagoya. We plan to showcase products such as rotary cutting power meters. This is a great opportunity to see our products up close, so please be sure to visit our booth! 【Exhibition Overview】 Date: October 18 (Wednesday) to 21 (Saturday), 2023 Time: 10:00 AM to 5:00 PM (until 4:00 PM on the last day) Venue: Port Messe Nagoya Booth Number: 3D85 Official Website: https://mect-japan.com/2023/ We look forward to seeing you at the venue and sincerely await your visit.
-
We will hold the Japan Kistler Cutting Processing Technology Seminar 2022!
This year, we will be holding the "Kistler Cutting Technology Seminar 2022" in person on the following dates. Due to infection control measures, the in-person venue will have a capacity of 40 people, but we will also provide a simultaneous online broadcast, so please feel free to apply even if you find it difficult to attend in person. - Date and Time: July 21, 2022 (Thursday) First Session: 13:30 - 16:30 (Doors open at 13:00) Second Session: 16:30 - 17:00 - Venue: Aichi Prefectural Industrial Labor Center Wink Aichi (Capacity: 40 people) and Online (Webex) - Participation Fee: Free (Please register in advance for both in-person and online participation.) - Detailed Information: https://www.kistler.com/uploads/Kistler_CF_Seminar.pdf - How to Apply: Please register using the application form linked above. We usually notify you of the receipt of your application within three business days.
-
We will hold the Japan Kistler Cutting Processing Technology Seminar 2022!
This year, we will hold the "Kistler Cutting Technology Seminar 2022" in a face-to-face format on the dates listed below. Due to infection control measures, the in-person venue will have a capacity limit of 40 participants, but we will also provide a simultaneous online broadcast, so please feel free to register even if you cannot attend in person. The venue will be the Aichi Prefectural Industrial Labor Center Wink Aichi and online. For more details, please refer to the following link: https://www.kistler.com/uploads/Kistler_CF_Seminar.pdf Please register using the application form from the related link below.
-
We will exhibit at EMO Hannover 2019, the world's largest metalworking trade fair.
We will be introducing new products at EMO Hannover 2019, which will be held in Hanover, Germany from September 16 (Monday) to September 21 (Saturday), 2019. At our booth, we plan to showcase the prototype of the new Piezo Tool System (PTS) for the first time. The PTS is a new system that allows for the direct measurement and monitoring of cutting forces at the tool tip in micro-turning operations, and we will explain the benefits to our customers (such as extending tool life) that come from implementing this system. For more details, please refer to our company website. ＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊ EMO Hannover 2019 Dates: September 16 to 21, 2019 Hours: 9:00 AM to 6:00 PM Venue: Hanover International Exhibition Center Booth Number: Hall 3 [I10] ＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊
